We have Debian Squeeze and we've bought Dell ST2220T multi-touch monitor with USB interface. Has someone successfully get touch screen working? Which module (driver)?
View 1 RepliesI'm looking for a driver (module) for Dell ST2220T multi-touch monitor to get touch screen working.
View 5 Replies View RelatedI'm having a bit of trouble setting up Multitouch for my current setup. I have gone through and tried setting it with synclient, but when I place both of my fingers on the touchpad, the pointer jumps/jitters around.
View 1 Replies View RelatedI'm fairly new to touch screens. I'm having a look on Amazon at multi touch monitors like an HP 2310ti and it seems everybody just accepts that Windows 7 can handle it out of the box.
How does it work? I can't find any resources explaining how the PC receives the input from the touch screen.
Do I need to connect the PC with the monitor via USB, or is there wireless/bluetooth technology embedded in the monitor like in a wireless keyboard/mouse? How does Linux handle such a monitor out of the box? Does it recognize something like 2 connected mouse devices? I read about a few projects trying to implement this stuff in Xorg/GTK, but it seems to be pretty experimental at current state (because there is little information, if any, on this topic).
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I have Dell 1545 pre-loaded with Ubuntu 9.04. It has Oracle VM VirtualBox installed, for which I run Ubuntu 10.04. I have downloaded drivers for Ubuntu 10.04 to interface with Lexmark X6650, and can easily print documents from Ubuntu 10.04. However, I cannot figure out how to access the scan function.
View 7 Replies View RelatedHow do get Ubuntu to recognize a monitor? I am not able to change resolution which is very annoying. The page is too big on the monitor so I have to scroll at everything I read.
View 4 Replies View RelatedI have a Dell Vostro 3500, which has a Broadcom wifi card. It requires non free drivers. So far it has been working well. However, after updating the kernel (via yum update), my wifi card (it used to be eth1) is totally gone: $ ifconfig eth1 eth1: error fetching interface information: Device not found The wireless indicator does not light up either. The kernel version is
[code]...
I want to install ubuntu server on an old pc and use it in my home office. However, I'll have to borrow a monitor to do the instillation... when I'm done I'll have to return it. Is there a way to monitor/manage the sever by using my web browser, free of cost?
Also seeing that I'm not so savvy with commands should I install the desktop interface?
The 14" (pretty sure of the size) LCD monitor is hooked up with "digital input" (not the VGA or whatever). I tend to use the console (i.e. ttyX) more than X windows, and it is extremely slow refreshing. A concrete example is opening a man page, or cat-ing a file go so slow it takes a second or 2 for them to fully display.
Is this a video driver issue? Here are some stats:
Code:
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev
[Code].....
I have a dell monitor, E153FPf, with an intel chipset 865G. I just changed from Debian to Open Suse 11.4. In Debian, everything worked fine. However, with Suse, every time I open a new window in Gnome, the screen will flash at about a 1 Hz rate, showing the new window, and then immediately revert to the previously displayed window.
If I change to a different workspace, and then change back again, the display works properly . . . until I open or close a new application window.I made sure YaST2 had the correct refresh and resolution; I downloaded and installed the latest Intel drivers, I enabled the correct horizontal and vertical refresh rates in /etc/X11/xorg.conf.d/50-Monitor.conf - all to no avail. I have searched around for answers, but most of the issues seem to be with monitors not working at all - not new or closed applications not refreshing the screen properly.
I am planning on buying a DELL Monitor for my desktop. Now, I would like to have one which has an in-built camera. Also, my operating system is going to be Linux. Will I have any driver related issues for monitor as well as for the in-built camera.
View 1 Replies View RelatedI have recently installed ubuntu using wubi on a dimension 9100 PC.When i boot up ubuntu I get a message that it cannot display current video mode when the GUI tries to launch. The monitor is a Dell E173FPb.From digging about on google it seems I need to edit the xorg.conf file? However, it doesn't exist in the /etc/X11 directory. Does wubi not create this file?
I then created a template of this xorg.conf with the "sudo X -configure" command. I then copied the created file to /etc/X11/xorg.conf and editied the Monitor settings. however, I still get the same error even when I put in the HorizSync and VerRefresh settings shown on the Dell webpage (31-80 and 56-76 respectively).
I was on earlier 9.x version of ubuntu with following configuration working perfectly: IBM ThinkPad T60 with ATI Technologies Inc Radeon Mobility X1400 VGA graphics card (found it from lspci) With an external Dell 19" monitor attached to it. I upgraded yesterday to Ubuntu 10.4 LTS and now the Dell monitor screen keeps flickering all the time! I always work with an external bigger monitor attached to my laptop as working for long hours on the smaller screen of the laptop gives me headache. The frustrating point is, this setting was working perfectly until I was on Ubuntu 9.x, I upgraded to 10.04 LTS and this has stopped working.
View 4 Replies View RelatedI'm running OpenSuse 11.1 with a Dell Inspiron 6400. I just bought a Medion Multi-Touchscreen-Monitor cos they were going cheap at the local supermarket. It says the touchscreen works with Windoze 7 only, but I thought its worth a go as I have 30 days to try before taking it back.
The monitor output works fine. I had to adjust the resolution setting but that's okay. However, when I plug in the touchscreen usb lead I've no success yet. I tried all the touchscreen Vendor/Name options in Yast->Hardware->graphics card/monitor but to no avail.
My dmesg output is:
Quote:
usb 4-1: new full speed USB device using uhci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
usbhid: timeout initializing reports
[Code]....
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies View RelatedBrand new Dell XPS 15 laptop.
NVIDIA GeForce GT 420M graphics card with Optimus.
15.6HDF TLF LCD L501X screen.
Centos 5.5 64 bit, text install.
I downloaded and install the NVIDIA graphics driver NVIDIA-Linux-x86_64-260.19.29.run When I run system-config-display the display configuration appears but is very, very faint. Increasing screen brightness has no effect.
I'm a student who is working on a wireless research project. I have a madwifi driver for Atheros chipset on Debian Linux. With having the wireless interface get into monitor mode, I want to forward the captured packets from the wireless interface to the other Ethernet interface so that a different computer which is connected to this machine via Ethernet receives those packets. I checked that alll packets are received in the wireless interface using TCPDUMP. I tried to forward those packets with IPTABLES like 'iptables -p FORWARD -i ath0 -o eth2 -j ACCEPT' However, I couldn't see any packets forwarded to eth2 using TCPDUMP.
View 5 Replies View RelatedInstalled fedora 13 to hard drive on fresh partition,installed ok,ran updater,installed all updates.all working ok but fedora is not able to detect my laptop monitor.i am unable to increase resolution.stuck on 800 * 600. when a window in open and i need to click at the bottom of the window i cant because it is bellow the screen.I went to [URL] to look for drivers.it only shows display drivers for red hat 7.0.i tried them but wont install.is thier drivers i can use for fedora 13,or a way to force resolution into 1024*768.
View 1 Replies View RelatedI have tried to follow the steps given in this thread: [URL]
I just can't get step 3 or 4 to work: svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk cd trunk
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying " The current input timing is not supported by the monitor display.
Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
I am now installing the CentOS5.4 with a DVD on a Windows machine. The video card is ATI Radeon HD 3450, and monitor is Dell 1909W. During the install, after recognizing the ATI card, and starting the xserver, the screen came up with a message saying: " The current input timing is not supported by the monitor display. Please change your input timing to 1440X900@60Hz or any other monitor listed timing as per the monitor specification. "
However, in Windows XP the monitor is configured as 1440X900@60Hz, which works well. Due to this problem, the GUI installation cannot proceed. And how can I fix this problem if I manage to install in the text mode.
I have Dell Vostro 3300 with Intel HD integrated graphic card and Samsung SyncMaster 2343BW external monitor.
This is the output of xrandr:
It runs on 2048x1152 full resolution, however, the picture on the monitor is blurry, it vibrates and looks like old TV with interlacing.
I tried to disable output to LVDS screen on laptop using xrandr but it doesn't help/
Previously I had HP laptop with integrated Intel and OpenSuse 11.0 and the external screen worked normally.
I have a Dell mini 10 netbook that I am trying to set up as a temporary HTPC. Using XP, I can send the video and audio over the HDMI connection, but when I attempt to do so from Ubuntu, there is not an option for a different monitor.
View 3 Replies View RelatedMy brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.
I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.
I've heard about the multitouch out in ubuntu 10.10 and have a touchscreen but it doesn't seem to work on it no matter what I do. I have googled everything on it and still no luck. I got an acer eee and use windows most of the time because of this barrier does anyone know how to fix this? Is anyone else having the same problem as me?
View 2 Replies View Relatedhow do you config ubuntu to work with multitouch... like Utouch?? using ubuntu 10.10
HP Touchsmart iq800s
Alright i used to be able to find stuff about how the multitouch trackpads work with ubuntu now. I can't find any now. I have a new computer coming in tomorrow that supports multitouch for the trackpad but I want to use ubuntu with it
View 5 Replies View RelatedI dont get my multitouch screen working. I have a Stantum screen (1f87:0002) and a GMA500 video driver with emgd and Xorg 1.9 I get a lot of output from evtest, xinput list-props, mtview etc. but no output from gesturetest or geistest. I have no idea where to proceed. (after successfully getting utouch-compiz working a second finger touch was not recognised as next single-input anymore)
View 1 Replies View Related