General :: How Multitouch Monitor Send Touches To A PC
Jul 22, 2011
I'm fairly new to touch screens. I'm having a look on Amazon at multi touch monitors like an HP 2310ti and it seems everybody just accepts that Windows 7 can handle it out of the box.
How does it work? I can't find any resources explaining how the PC receives the input from the touch screen.
Do I need to connect the PC with the monitor via USB, or is there wireless/bluetooth technology embedded in the monitor like in a wireless keyboard/mouse? How does Linux handle such a monitor out of the box? Does it recognize something like 2 connected mouse devices? I read about a few projects trying to implement this stuff in Xorg/GTK, but it seems to be pretty experimental at current state (because there is little information, if any, on this topic).
View 3 Replies
ADVERTISEMENT
May 26, 2011
We have Debian Squeeze and we've bought Dell ST2220T multi-touch monitor with USB interface. Has someone successfully get touch screen working? Which module (driver)?
View 1 Replies
View Related
May 11, 2011
I'm looking for a driver (module) for Dell ST2220T multi-touch monitor to get touch screen working.
View 5 Replies
View Related
Mar 28, 2010
I need a script that would continuously monitor one port and when it is active (not listening or waiting) execute a series of commands to standard output.I am familiar with netstat but am not good with scripting so
View 15 Replies
View Related
Sep 30, 2010
I just connected an old Microsoft Wireless Desktop Elite Keyboard (keyboard + mouse set) to my Ubuntu and I was wondering if it is possible to configure all the additional keys and in particular the wheel on the keyboard.I found that keytouch was the software to do this, but on Ubuntu 10.04 seems to have some troubles: even after the configuration, all the additional keys are just... dead. The events connected with any of the keys never start.Does someone know how to configure this software?
View 1 Replies
View Related
Apr 24, 2011
I've been able to get Rhythmbox to at least acknowledge my iPod Touch, but when i try and add music to it, my iPod still says "No Content." It looks like it syncs, when Rhythmbox is transfer the music to my iPod it even says that it's syncing on the iPod, but when I check to see if there's any music, there never is.I've searched and haven't been able to find any solutions, but I've seen a lot of old threads with people that have this problem. Has any been able to transfer music onto an iPod Touch successfully at all?
View 9 Replies
View Related
May 11, 2011
im looking for a program that lets me monitor server remote a check if apache is running and if its not send out a mail pretty much something like the Big Brother projeckt was before they went comercial i found a few projekts but most havent been updated for years anyone got a clue on any active projekt that does this?
View 1 Replies
View Related
Mar 28, 2011
I am looking for a utility that would do the following:1. Be run manually on a list of files whose sizes should not change, to get a control file containing the sizes of each file.2. Subsequent manual runs would report any changes in size of any of the files in the list, and allow option to accept the new sizes.3. Be run as a cron job to check for changes in the file sizes and send an email alert if a change has occurred since the last time it was run.The purpose is to detect possible hacks of key files on a website. It would not include files expected to change, but just those that should not change. It would be run manually a few times to get the control list one wants to monitor.
View 3 Replies
View Related
Jan 20, 2011
in the middle of script, i need to send the output of (send command on line 8) to a file
#!/usr/bin/expect
spawn telnet 172.20.64.133
expect "ENTER USERNAM <"
[cod]....
i treid the below on line 8 :
1- send "show command;
" > logfile.txt : gives an error extra character after the "
2- logsave logfile.txt 'send "show command;
" ': error invalid command
3- i simply tried to send the output of the whole script to file logsave /home/logfile ./script : seems that logsave work under root only
4- ./script > logfile : the problem with this is that the output of echo or (read "enter your id") command will not be displayed on the screen (actually nothing will be displayed, i have to open the log file to see the output). is there any way to save the log of the "send" ? or to save the log of the complete script without hiding the output on the screen?
View 2 Replies
View Related
Oct 19, 2010
I've heard about the multitouch out in ubuntu 10.10 and have a touchscreen but it doesn't seem to work on it no matter what I do. I have googled everything on it and still no luck. I got an acer eee and use windows most of the time because of this barrier does anyone know how to fix this? Is anyone else having the same problem as me?
View 2 Replies
View Related
Oct 10, 2010
how do you config ubuntu to work with multitouch... like Utouch?? using ubuntu 10.10
HP Touchsmart iq800s
View 2 Replies
View Related
Oct 17, 2010
Alright i used to be able to find stuff about how the multitouch trackpads work with ubuntu now. I can't find any now. I have a new computer coming in tomorrow that supports multitouch for the trackpad but I want to use ubuntu with it
View 5 Replies
View Related
May 28, 2011
I dont get my multitouch screen working. I have a Stantum screen (1f87:0002) and a GMA500 video driver with emgd and Xorg 1.9 I get a lot of output from evtest, xinput list-props, mtview etc. but no output from gesturetest or geistest. I have no idea where to proceed. (after successfully getting utouch-compiz working a second finger touch was not recognised as next single-input anymore)
View 1 Replies
View Related
Sep 25, 2015
I switch over from old laptop to a new one. This one has now a multitouch touchpad wich annoys me. With my old laptop i could select a text and paste it with middle mouse button or with 2 buttons enabled from the touchpad.
Now i moved my existing ssd drive from my old laptop to my new one, so the software and configuration is the same.
I can pasting nothing anymore by pushing in left&right on the touchpad. Due the multitouch i presume? Copy/Paste aint working anymore with urxvt. I would like to get this behaviour back because it's plain simple, fast and works almost everywhere.
C/P Still works with the middle mouse buttons but i don't use a mouse all the time.
How to get pasting work with multitouch?
View 1 Replies
View Related
May 19, 2011
I've been working on this for weeks, and I can't get my egalax touchscreen to work with gestures in Natty. I believe I have been booting in Unity, but have tried in the traditional Gnome-top as well.
The screen just works like a one button mouse. I get out put from the mtdev-test, but nothing from gesture test. I've tried with and without the egalax-multitouch-driver-common installed.
There is no xorg.conf, but I don't think there should be one.
View 4 Replies
View Related
May 11, 2011
I'm having a bit of trouble setting up Multitouch for my current setup. I have gone through and tried setting it with synclient, but when I place both of my fingers on the touchpad, the pointer jumps/jitters around.
View 1 Replies
View Related
Feb 16, 2010
I hate OSX. I have however gotten very used to the multitouch trackpad on my aluminum MacbookPro. So, I would like to blow away OSX and install Ubuntu native. I was wondering if I will loose multitouch capability if I do this though. Mainly 2 finger tap for right click, and two finger scroll. My MacbookPro is rev 5,2.Are there any other issues I should think about before taking the plunge?
View 5 Replies
View Related
Jul 3, 2010
I just found out that many Synaptics touchpads are capable of multi-touch and it's possible to do 2-finger scrolling and more.I have enabled this functionality in windows and I am sure now that the touchpad inside my laptop is capable of that.In Fedora 13 (64-bit), however, I was unable to make it working. I found a guide for Linux (Ubuntu) right here:URL... In Ubuntu it multitouch worked without problems after following the guide.
I first thought that I screwed something up on my Fedora and downloaded/ran live Fedora 13 64-bit disk to see if this trick will work with Fedora intact. After trying that guide in live Fedora CD I quickly found out that I couldn't enable multitouch the same way as on Ubuntu.I have no idea what could be different. Both Fedora and Ubuntu had Synaptics driver installed on live CDs (and on my installed Fedora too).
View 14 Replies
View Related
Mar 20, 2010
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies
View Related
Apr 20, 2010
I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies
View Related
Aug 17, 2011
I'm writing a script that will send an alert email given certain conditions. I have the impression that sendmail is what I need to do that. I just don't know how to use sendmail at all. I assume I have to set it up like a typical mail client so that it has a mail server to log into to send from.
I've looked through the man pages, but I can't find anything in plain English there on how to set it up, or how to use it once it is set up.
View 14 Replies
View Related
Apr 8, 2010
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies
View Related
Mar 3, 2010
I want to write a shell script, so that at 9AM every morning a general will be sent automatically to my network users E-Mail ID. My users are as follows: akhtaruzzaman@a[URL], ariful.[URL] etc.
Below is my little effort:
# !/bin/bash
userlist=`cut -f 1 -d : /etc/passwd`
mail -s "mailbackup" << END
keep mailbackup in another drive daily for security purpose
View 3 Replies
View Related
Jul 21, 2011
I m not able to configure sntp server at my linux distribution.
Here are the details. Defined the mail server here.
Code:
/etc/mail/sendmail.mc
dnl define(`SMART_HOST', `XXX.XX.XX.XXX')dnl
ran this command.
[Code]...
View 10 Replies
View Related
Jan 20, 2011
I have a minecraft server running as a daemon. When you run it normally (not as a daemon), you can type commands into the console. How can you get to the console so I can send it commands while it's running as a daemon?
View 1 Replies
View Related
Mar 24, 2010
I use CentOS 5.3 and I am trying to send a simple email through mutt.My command is:echo "test" | mutt -s "test email" myemail addressI have no errors displayed but the email never goes out of the machine. Also the /var/log/maillog is empty.I can see the queued email with:sendmail -bpSo emails never go out.This PC is connected to a network which the gateway is another Linux machine which is configured to be the default gateway in my /etc/resolv.conf as nameserver.
View 2 Replies
View Related
Nov 15, 2010
I'm trying to get some insight on how to move forward. I have a bit of a problem. I am just starting out in unbuntu and I have no experience working with 2 os on my computer (coming from windows). I have a lot of files (music, pictures, movies) in windows, but I want to use them on unbuntu. Is there a way for me to have both os access those files, or better yet, is there a way to send all my files to unbuntu, so I can start deleting all my stuff in windows?At the moment, I'm planning to burn all my files to dvds (in windows), then just drop them off in unbuntu, but I'd love it if there was a way which didn't involve me burning tons of dvds...Oh yea, and programs too... can I transfer them, or do I need to just reinstall them on unbuntu (like stepmania, guildwars, dvd shrink, kmplayer, etc
View 2 Replies
View Related
Mar 19, 2010
I have gpg (not sure how to check the version) installed and running nicely. I am attempting to publicize my public RSA key to various key servers, but even tho everything seems to work nicely in actuality it does not.
Code:
When I check that particular (and others after similar attempts) keyserver for my e-mail address it only finds my old, revoked key. How can I get publishing my RSA key from the command line to work in actuality?
View 1 Replies
View Related
May 21, 2010
How do you generate the end of file character so that you can send it to a script.
View 4 Replies
View Related
Jan 15, 2011
I use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 Replies
View Related
