On ubuntu 10.0 desktop, I can configure network ( for example, eth0 and eth1 )via GUI, but the /etc/network/interfaces just had two lines after setting eth0 and eth1:
Code:
I can't use ifdown/ifup to stop/start eth0 or eth1 because they're not in the file. So which file is written after I configure network via GUI?
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI've enabled Remote Desktop through the GUI and am able to connect using VNC. However when I reboot the VM I lose that config until I go back into the configuration, type in the password again, and close it. Then I can VNC to it. I verified vncserver is in the start list.
View 2 Replies View RelatedMy colleague changed the hostname using "system-config-network", but now I want to change it using any how (either system-config-network or /etc/sysconfig/network). Even I changed it from /etc/sysconfig/network. But when I reboot the system its getting old hostname. Is there some other place to change hostname?
View 5 Replies View RelatedI am using FC 2, and I get 'eth0 failed' during startup.
I am configured for DHCP
device is 'inactive' under network device control after reboot
click 'activate', sometimes I can surf, others not.
When I can't get online, sometimes deactivating and reactivating works.
edited connection to 'activate device when computer starts'
eth0 still fails at start-up, and device is inactive.
I am supposed to use FC2 for my schoolwork
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
I'm looking for a manner to prevent users from changing the desktop background/wallpaper and all other gnome configuration with booth Ubuntu and Kubuntu. This too (Abraxis, some years ago, have same my problem) [URL] do not solve the problem, for example if I change whit chown (*) own and group of this file to root /.gconf/desktop/gnome/background/%gconf.xml, at the next reboot file return in the previous state. (I don't like Pessulus).
(*)
chown root:root %gconf.xml
chmod 644 %gconf.xml
At the reboot file change automatically owner to "student", I don't know why?
I just re-installed 11.3 KDE. I kept my old /home directory on a USB drive. Now I would like to replicate my panels. Where are the desktop config files kept?
View 7 Replies View RelatedUsing xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies View RelatedThis is my 1st time to use openSUSE After install
Code:
lsusb -v
Code:
Bus 002 Device 002: ID 0411:0137 MelCo., Inc.
Device Descriptor:
bLength 18
[Code].....
I just installed F13, and many things have changed (was using FC4!). When I restart my network, my NIC card does not come back up with the correct info, and for the life of me, I can't figure out why. Here is the NIC info for eth2 when things are correct [Replaced the MAC address due to paranoia, but it's correct on my machine]:
Code:
eth2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::baac:6fff:fe8e:57d2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Here is the cfg file:
Code:
# Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
DEVICE=eth2
NAME="System eth2"
[code]....
I would like to setup a remote desktop for my Ubuntu computer so I can use my computer on a Windows computer that is on a different network. How can I do this?
View 1 Replies View RelatedMy old /etc/network/interfaces isn't working in 9.10. I've used it from 8.04 to 9.04 without issues.
I need to make multiple configuration per interface:
Code:
auto lo
iface lo inet loopback
auto lo:1
[Code].....
If not how can I downgrade the program responsible for reading this file?
I'm having problems with networking. I just installed Debian 6 SServer LAMP and it didn't autoconnect to internet. I plug in the internet to my eth0 (default) port, and I keep getting timeouts. I found that dhcp3-client was not installed and fixed that. My etc interfaces has this for eth0: Auto eth0 Iface eth0 inet dhcp What other packages or config do I need to make the internet work? It's missing something basic that wasn't setup properly. I do get the correct dns address to my isp provider when I check etc resolv.conf. It just can't dhcp discover.
View 1 Replies View RelatedI have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies View RelatedI looked around, but found no results that really matched and I would like to point out that I am fairly new to linux, so this may be a very obvious answer to some of you.I am running fc12.i686, installed from a disk in the back of a book for a class. No one else in my class is having this issue.When I select System > Administration > Network I am given this error: Failed to execute child process "/usr/bin/system-config-network" (No such file or directory). I am not so new to not realize that this file is not there, which I confirmed with an "ls -a". My question is, is there any way that I can download and install that bin? Or perhaps replace/repair it with the disc? It was supposed to be in the original install and my have been, the only thing that I have done in the /usr/bin/ directory is I tried to install Java (6.22 I think it was), which told me it installed correctly but didn't work when I tried Minecraft.
View 3 Replies View RelatedFirst, like a dummy I did not backup the Samba config file before making changes. Using openSUSE as ftp and http server, was following tutorial to share between openSUSE and windows. I was using VNC to access machine to edit Samba config file, after altering the the file VNC authenication fails. I can still authenicate locally and through the ftp.
View 1 Replies View RelatedI am unable to find any documentation on the purpose of the unique setting. Does anyone have a clue what it does and how I assign my secondary interface one?
BOOTPROTO='none'
BROADCAST=''
IPADDR=''
[code]....
I want to reinstall "system-config-network" in Fedora10. I have now system-config-network 1.5.95 and I want to have system-config-network 1.4.3 (it is from fedora8)
View 3 Replies View RelatedI've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies View RelatedI have tried re-installing system-config-network.
root@localhost:/home/kbriggs> system-config-network
Traceback (most recent call last):
File "/usr/sbin/system-config-network-gui", line 48, in <module>
gettext.bind_textdomain_codeset(PROGNAME,locale.nl _langinfo(locale.CODESET))
AttributeError: 'module' object has no attribute 'nl_langinfo'
new Install of 11.2 every time i boot i have to config network devices via Yast Control Center. I now have 8 eth configs for my one local net adapter. Why does the MAC address change each time? I cant use my routers built in MAC filter and MAC control functions if this keeps changing. So each time i boot i need to also go into my router and build a new MAC address profile based on the new MAC address before i get Internet access. Security to the point of no access...I hope this is just a bug in the system. I thought MAC addresses were firmware/device specific? What I need is one eth config that works each boot. And I need one MAC address that does not change between boots.
View 4 Replies View RelatedHow can you do it with individual ifcfg-* files?
I've tried adding them like this:
Filename: ifcfg-vlan1:0
BOOTPROTO='static'
ETHERDEVICE='vlan1'
STARTMODE='manual'
USERCONTROL='no'
IPADDR='192.168.1.2/24'
but it fails on ifup, thinking it might be the filename (the vlan tagging being picked up from the name) I tried renaming it but still no go.
I can add IP's via ifconfig, eg ifconfig vlan1:0 192.168.1.2 netmask 255.255.255.0 up
and I'm pretty sure I could add multiples to the ifcfg-vlan1 file but how do I add them from individual config files?
I'm trying to connect to another computer in my network via qpid-config(which is running qpid server). Here is where I follow the instructions [URL].. I can connect to qpid server(which is running on the network) via JMX Management Console which is gui version of what I'm to accomplish from console/unix shell. I can connect and read messages from queue(s) from this server so it means there is no problem with network or whatever. I'm running Fedora Core 13, here is the following combinations I've tried so far with qpid-config so I can run qpid-tool and some other commands :
Code:
qpid-config -a localhost, 192.168.1.2:8999, guest/guest@qpid-server
qpid-config -a guest/guest@qpid-server 192.168.1.2:8999
qpid-config -a qpid-server, 192.168.1.2:8999, qpid-server:8999, guest/guest@qpid-server
qpid-server is added to /etc/hosts as hostname for 192.168.1.2
Had anyone anything similar to this maybe I'm missreading the instructions(although they are pretty straight forward), I've spend so much time on this and just stuck now.
I just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
View 3 Replies View RelatedI was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies View RelatedI'll try not to be too wordy. Want to get my openSUSE 11.2 (fresh install) laptop to see my network shares ...not to be a server or share any files. I've looked at 50 websites and everything seems to be "server" and "share" oriented. Maybe I (newb) am confused by the terminology...
I have a router that provides DHCP. My LAN PC's consist of a Vista laptop, an XP DAW, and a Kubuntu file server. Somehow I got Kubuntu configured properly, all of the Windows machines can access it and vice-versa. The Kubuntu smb.conf does not work on this laptop, and it seems overkill -no shares needed here. And yes, I get DHCP and interweb on the laptop -posted this with it.
All I want is access to my (other) network drives from this (openSUSE 11.2) laptop. Not a server, not to share. This is easy... right? It's driving me nuts Is there a Samba configuration that will let me jump onto networks and surf Windows/Samba shares like any old Windoze box browsing Network Neighborhood? Do I have to be a Samba guru?
I would like to know what is OpenSuse application that does the same job of RH's system-config-authentication application. I need to test Active Directory authentication while setting up Samba file server to use AD accounts and ACLs.
View 2 Replies View RelatedI've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies View Related