OpenSUSE Network :: Samba Config For DHCP Client Laptop?
Jan 11, 2010
I'll try not to be too wordy. Want to get my openSUSE 11.2 (fresh install) laptop to see my network shares ...not to be a server or share any files. I've looked at 50 websites and everything seems to be "server" and "share" oriented. Maybe I (newb) am confused by the terminology...
I have a router that provides DHCP. My LAN PC's consist of a Vista laptop, an XP DAW, and a Kubuntu file server. Somehow I got Kubuntu configured properly, all of the Windows machines can access it and vice-versa. The Kubuntu smb.conf does not work on this laptop, and it seems overkill -no shares needed here. And yes, I get DHCP and interweb on the laptop -posted this with it.
All I want is access to my (other) network drives from this (openSUSE 11.2) laptop. Not a server, not to share. This is easy... right? It's driving me nuts Is there a Samba configuration that will let me jump onto networks and surf Windows/Samba shares like any old Windoze box browsing Network Neighborhood? Do I have to be a Samba guru?
View 7 Replies
ADVERTISEMENT
May 18, 2010
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
View 5 Replies
View Related
Aug 18, 2010
In 11.3, if in "/etc/sysconfig/network/ifcfg-eth0" i set DHCLIENT_SET_DEFAULT_ROUTE="no" this seems to have no effect. If i start my box, the routing table has the "default route"-entry offered by a remote DHCP-Server. More Info: My Susebox has eth0 and eth1 and both network devices should use DHCP4. But from DHCP-offer on eth0 i want to use
* "offered IP-Adress for eth0"
* "offered NTP-Server"
* "offered Host-Name"
From DHCP-offer on the eth1 i want to use
* "offered IP-Adress for eth1"
* "offered DNS-Servers"
* "offered Default Route"
View 1 Replies
View Related
Jan 14, 2010
I have setup an dhcp server wich allows ICS, and a samba server as a PDC. I can access the shares from windows if I type the server Ip (ej. \192.168.0.1), however if if write the address (ej. \dbaserver) I cannot access them.If I type ping dbaserver on a command prompt, it returns 127.0.0.2 not 192.168.0.1, what could be wrong. I asume because of this I cannot join the domain also.
View 4 Replies
View Related
Apr 1, 2011
First, like a dummy I did not backup the Samba config file before making changes. Using openSUSE as ftp and http server, was following tutorial to share between openSUSE and windows. I was using VNC to access machine to edit Samba config file, after altering the the file VNC authenication fails. I can still authenicate locally and through the ftp.
View 1 Replies
View Related
Jun 27, 2011
I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
View 3 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Aug 18, 2010
I'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
View 1 Replies
View Related
Oct 11, 2010
I installed SLES 10.2 with SAMBA 3.5.5.43 to retire our old Microsoft Windows 2000 Server and save some money. All was fine until last week when our chief asked to me to set password expiration for all clients. This morning, all users cannot logon because, when they logon, windows asks to change password and then it gives error error "Access Denied".
[code]...
View 1 Replies
View Related
May 28, 2011
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies
View Related
May 30, 2011
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
View 4 Replies
View Related
Sep 1, 2010
I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Jul 17, 2011
I have ovpn configuration files for Windows from SwitchVPN. They do not provide configuration files for GNU/Linux. They said I can extract the certificate and key files from the ovpn files, but I'm confused about how to do that.First of all, I don't know which Authentication Type to choose: "Certificates (TLS)," "Password," "Password with Certificates (TLS)" or "Static Key."
Second, I don't know what to put where from the ovpn file. I see a <ca> � </ca> section and a <tls-auth> </tls-auth> section, but I don't see how those correspond to any of the Authentication Types. "Certificates (TLS)" and "Password with Certificates (TLS)" require two certificates and a key, "Password," requires one certificate and no key, and "Static Key" requires a key and key direction but no certificate. When I connect to SwitchVPN in Windows, it asks for a user name and password.Here's an example of the ovpn files (certificate and key contents removed):
Quote:
route-delay 3
fast-io
client
dev tun
[code]...
how to get what I need from the ovpn files, and which Authorization Type to choose in the Network Manager VPN configuration GUI, and what to put in the blanks?
View 1 Replies
View Related
Oct 31, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies
View Related
Oct 28, 2010
Does winbindd must run on linux box client on network with samba ldap server configured as PDC.
View 5 Replies
View Related
Jul 15, 2010
Why trying to avoid ranting about my Linksys router, I'll try and keep things short. I have a Linksys router in which the default firmware was terrible and would not correctly renew its DHCP lease. After getting feed up with that I flashed dd-wrt on the router and now it works better but randomly DNS queries would stop being resolved. To rule out the chances that it is my ISPs DNS servers I switched my DNS to openDNS, same problem happens (although I have to admit openDNS is a lot better than what my ISP has).
Anyways I'm about feed up with it and about an inch away from drop kicking the thing out my window. To avoid that I figured I will give it one more change and instead of using my Linksys as my network gateway I'll move all of that to my home server, and make the Linksys just an wireless AP. Besides setting up DHCP, DNS, and iptables on the server is there anything else I will need to know and setup on the server to make this work?
Side note anyone using openSUSE for DHCP know if setting up reserved IPs for certain MAC address is possible?
View 2 Replies
View Related
Jan 17, 2010
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
May 12, 2011
I have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies
View Related
Jun 3, 2010
I had 200 workstation with both Windows XP and SuSe Enterprise Linux. Sometime, a few clients can't get IP address from DHCP with SuSe OS. With the same computer, if I reboot and chose Windows XP, it work fine. The log message or the boot message was "No IP Address yet ...backgrounding". I tried to reconfig network device, restart services, change another port, change another line LAN, set static IP Address .... but there's no luck for me.
View 5 Replies
View Related
Aug 11, 2010
I have a small network setup and I cannot get DNS to work. DHCP is functioning normal and working fine but it cannot update the DNS pointers for some reason. My files are below.
dhcpd.conf -----------------------
Code:
ddns-updates on;
ddns-domainname "mydomain.lan";
ddns-update-style ad-hoc;
allow unknown-clients;
[Code].....
View 9 Replies
View Related
Feb 10, 2010
i don't know the proper commands to list my system information. Up until recently, the internet worked fine, but suddenly stopped. I opened up YaST2 and found that the network device was set up to never turn on, and i switched it to "at boot time" but it still doesn't work.
View 9 Replies
View Related
Apr 9, 2010
I've just installed opensuse 11.2 with the network installation iso. During the installation, it has got the IP via DHCP without any problem, and I has downloaded all the needed packets without problems... But when the installation finish.I have no network connection It's strange, because I have IP address, I get the IP from the DHCP server, and I can see the IP addreess if I do "ifconfig", the default route and even the DNS servers in the resolv.conf file; but I cannot ping my gateway (that is the DHCP server as well!!), I cannot ping anything in my network and either anything in internet. I see a network error at the start, but it finally gets the ip address. In the dmesg, the last message repeats over and over. The machine is a Hyper-V virtual machine, but as I said... I worked very well during the installation, I don't know what is going on. I've tried to reinstall, but it doesn't make any difference
View 2 Replies
View Related
Apr 26, 2010
basing on the research and trial and error which am still on the trial stage with errors here's the scenario We have 5 VLAN's with and existing Windows DHCP Server, that serves 5 Scopes for the 5 VLAN's 192.168.100.x and 192.168.200.x IP Addressess evrything works well on our Windows DHCP server, what i want to do is replace our windows dhcp server with a linux box , with one NIC , ive read about VLAN on linux 802.xx something and VLAN Tagging am already confused on what to do.. what i want to ask you guys is an assistance implementation the vLAN on linux then the dhcpd.conf
View 9 Replies
View Related
Jan 29, 2011
I cannot uncheck the "Change Hostname via DHCP" box because it is disabled. Next to it says "No interface with dhcp". How can I fix it? I'm using OpenSUSE 11.3/KDE4
View 3 Replies
View Related
Mar 1, 2010
I recently ran into a problem with my at&t vpn connection. I'm hoping someone in this forums may be able to help? It's been working beautifully then one day it just wouldn't connect. I'm wondering if AT&T may have something to do with this...? I have tried reinstalling agnclient-1.0-2.0.1.3000.i386.rpm and agnSUSE10Prep-1.0-2.i386.rpm but nothing seem to work.I'm running Linux 2.6.31.12-0.1-desktop i686System: openSUSE 11.2 (i586)KDE: 4.3.5 (KDE 4.3.5) "release 0"
View 2 Replies
View Related
May 13, 2010
This is my 1st time to use openSUSE After install
Code:
lsusb -v
Code:
Bus 002 Device 002: ID 0411:0137 MelCo., Inc.
Device Descriptor:
bLength 18
[Code].....
View 1 Replies
View Related
Mar 19, 2010
I am trying to enable DHCP so that it will give out IP's to some XP boxes when they boot. I have had success doing it dynamically, but not statically using the host declaration.
host xpTest {
hardware ethernet 00:50:56:2A:3B:00;
fixed-address 192.168.100.2;
}
My question is, what should the subnet declaration be if I only want to hand out static IP's like this? Also, the host is the same name that is specified in /etc/hosts correct?
View 3 Replies
View Related
Apr 3, 2010
I'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.
View 5 Replies
View Related
