i format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
View 2 RepliesIn centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
I am trying for the last many days to setup my opensuse 10.3 as Samba PDC Server according to the URL mentioned below, but in vain:How to setup SUSE 10.3 as Samba PDC - openSUSE When ever I try to join a Windows XP machine to the domain setup on Opensuse, I get the error:'The following error occured while attempting to join the domain. The network path was not found'. What could be the reason for this error despite of the fact the I am able to ping the FQDN of the PDC from the XP machine, but the XP machine simply denies to join the domain because of the above mentioned error.
View 7 Replies View Relatedi am trying to solve this error from last 4 days.and dont know from where problem comes
i installed and configured smb.conf as follows:
[global]
workgroup = WORKGROUP
[code]...
i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View RelatedI've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
I installed vbox and windowsXP as guest and fedora13 as host. As discussed in [URL] i have run: Quote: $ VBoxManage sharedfolder add "WinXP" -name "Downloads" -hostpath "/home/rudra/Downloads" --readonly but in guest, as i prompted Quote: net use x: \vboxsvrDownloads it gives error: Systemerror 53 has occured the network path was not found
View 6 Replies View RelatedI have centos 5.3 installed, while restarting httpd service I get error starting http:/bin/bash line 1 9941 segmentation fault /usr/sbin/httpd. If I stop httpd service and start it will start but if make service httpd restart it give above error.
View 1 Replies View RelatedI trying to install RALUS on my RHEL 5 os version 2.6.18-8.el5 (i386) My backup exec server is BE 2010 R2 the installation of ralus completes however with error libstdc++.so.5 missing noted that due to this i'm unable to start ralus service /etc/init/VRTSralus found a link [url] need to download compat-libstdc++-33-3.2.3-63.i386.rpm tried the rpmfind.net and as well as rpm.pbone.netid did find appropriate rpm however could not download one.
View 4 Replies View RelatedI need to start a service before network service How to?
View 1 Replies View RelatedI marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
i can smb in centos 5 and i run service smb restart, it shows :smb: unrecognized service..... i run rpm -qa |grep samba,it shows
samba-common-3.0.33-3.7.el5
samba-client-3.0.33-3.7.el5
.....
I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.
I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
I have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedI have recently installed CentOS onto an old machine to get it up and running as a basic web/mail server. Originally the Network Interface worked ok, however I have been editing /etc/sysconfig/network-scripts/ifcfg-eth0 to try and set the IP address to be static.Now when I run the 'service network restart' command it won't bring the eth0 interface up and comes up with the following errors;
ifcfg-eth0 Line 3 DEVICE: command not found
missing config file ifcfg-ifcfg-eth0
It doesn't seem to like any of the command words, even though most of these were in the original file that worked and the ones I added to do static I have commented out.
while starting xfs service on centos 5.3 shows error as starting xfs :mkdir:cannot create directory "/tmp/.font-unix':too many links
View 6 Replies View RelatedI came across this reult of the type command (hashed) in another post. (see below).
Code:
fraespappp8:/data/apps > type topic_file_publish.sh
topic_file_publish.sh is hashed (/data/apps/pnbgstk/publication/topic_file_publish.sh)
This (result = hashed) is new to me.
I wonder which kernel/distro/shell it is from.
Unable to start tftpd service after starting xinetd
View 9 Replies View RelatedFrom my office and home, I can access a web service, no problem. However, from my server at the data center, I cannot. Could this be a DNS issue? I've tried with iptables enabled and disabled. selinux is disabled. This server has multiple network interfaces, one public and two private. The public has a WAN IP address (1.1.1.1), the private is 10.1.10.2 and the other private is connected via crossover cable to another server 192.168.100.1. I think route -n tells me the WAN interface is used to access the internet, as its gateway is my ISP's upstream gateway. CentOS 5.5.
View 4 Replies View Relatedi was using win xp sp2. i just installed red hat linux by making one of the windows drive as unpartitioned space . i kept windows as my default os .my linux is working properly , but when i goes to start windows , it shows error " windows unable to start , hal.dll file is missing or corrupt".so to solve this problem , i decided to repair windows , but when i isert win xp bootable cd , cd starts booting , after showing messege " setup is inspecting your hard ware " , black screen appears , nd nothing happens after that.what should i do ? i want keep linux as it is and also want to start my windows again . tell me how to repair windows . what should i do to boot win xp bootable cd properly.
View 12 Replies View RelatedI have partioned my harddrive when I installed ubuntu 10.10 Desktop edition, 32-bit. But, after I installed it I can no longer access the Windows partition. I have never played with Linux OS before. I will provide a screen-shot of the partition. [URL]
View 14 Replies View Relatedlinux 5.4(RHEL) and window machine are pinging nicely.able to access window on linux but not linux at window(xp)? xinetd is running on linux as well as telnet service is also running on xp.
View 1 Replies View Relatedi can download but i cant run anything because there is no ar file path for ark. please dont tell me to download something to get the ar file path because if i download it i can't open it
View 1 Replies View RelatedI've been having an issue with samba; connecting to a share from my Windows 7 machine.
Note: Windows 7 firewall has been turned OFF.
When I try to connect to the share from windows I get this error "Windows cannot access \PROSPERITY/home/queenl" , below that the error details are "The network path was not found."
It seems to me that the syntax is not correct, hence in the error it states "\PROSPERITY/home/queenl"
I am able to print to the printer that is being shared by samba..
Below is a copy of my smb.conf file. I'm using swat to manage my smb.conf file.
# Samba config file created using SWAT
# from UNKNOWN (127.0.0.1)
# Date: 2010/10/15 17:30:15
[global]
server string = %h server (Samba, LinuxMint)
map to guest = Bad User
[Code]....
i have problem in configuring samba 3.5 in redhat6 64 bit i can not access the linux share from windows.it show the error "Network path not found"
View 2 Replies View RelatedWe have a Oracle 11.2 database running on Red Hat 5.5. The database have a scheduled job to fetch some files from another server using ftp, and herein lies the problem.he job runs a pl/sql that runs the function in an (by us compiled) external libraryThe ftp-functionality itself is done by using libncftp and it's API's.The process starts correctly, but then trying to login to the actual ftp host, ncftp only reports "Unknown username/password" (which is not the case).I have the exact same code in an executable and when run from an interactive shell, it works fine.So the only thing I can come up with, is there are differences when the process is started by Oracle, rather then being ordinary" process.And I am stuck.If there are any environment variables, paths etc missing when running the extproc-process, how do I find out which?Because the real problem is NOT wrong user or password.
View 8 Replies View RelatedI am completely new to linux an have read the replies to similar questions but am unsure of how to access the directory mentioned ~/.gconf/system/networking .I also do not have a system recovery disc or flash drive
View 7 Replies View RelatedI have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version.
everything works fine on Linux host
I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc.
I tried setting MTU and TCP window size on Windows lower, but did not help