General :: Set The Resolution Of The Grub Loader Screen?
Jun 15, 2011
On the boot up to the Grub loader screen my monitor (Acer X193w) displays a "screen resolution not supported" message in a floating window, even though the Grub screen itself is displayed. It appears as a flattened rectangle, like wide screen format films on a TV (black bar top and bottom), the floating message on top of it. Once Debian is selected and boots, obviously my xorg.conf takes over and sets the 1440X900 resolution and everything is fine. But the Grub start up bothers me. How do I set the resolution of the Grub loader screen?
[Code]....
View 2 Replies
ADVERTISEMENT
Nov 16, 2010
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
View 6 Replies
View Related
Jan 25, 2010
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
View 2 Replies
View Related
Jun 11, 2011
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
View 6 Replies
View Related
Jan 2, 2011
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
Message:GNU GRUB version 1.98-1ubuntu5
View 4 Replies
View Related
Jun 8, 2010
First time I am having issues with Centos.
I bought a Intel DQ45CB LGA Q45 Micro ATX Motherboard and I am installing the 64 bit version of centos.
The install of Centos goes just fine. However when I first try to boot up, after post is done, I get a blank screen. I do not even get on the Grub screen. No access to any of the ttys. No access to anything, files, folders. I only get a blkinking cursor, no command prompt, nothing.
This happened with Centos 5.2 and 5.3
Just for the hell of it, I installed XEN Xitrix and I have no issues like that.
View 2 Replies
View Related
Apr 30, 2010
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies
View Related
Jun 29, 2010
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
View 9 Replies
View Related
Oct 24, 2010
I've got a HD screen: 1920x1080p. Grub (1.98 ) has the resolution: 800x600 and Plymouth also. It is irritating me that plymouth shows a very ugly purple splash screen in a very low resolution (800x600). How can I fix that? I've got an ATI Radeon HD 4670, and use the drivers from ATI...
View 8 Replies
View Related
Dec 28, 2010
I am planning to use EFI BIOS in my system with GRUB as the boot loader. Is it possible to use Grub loader with EFI BIOS?? If yes, whether Grub needs to be EFI compliant to use with EFI BIOS??
View 1 Replies
View Related
Jul 12, 2011
i have a Computer with windows vista and Ubuntu dual booted, the thing is i upgraded to win 7 and now the grub loader doesn't show up. Ive tried all the usual fixes but i cant fix it all i need is a CD ore something to get me into the Linux install
View 5 Replies
View Related
Nov 27, 2009
I have 2 os redhatlinux 5.1 and windows xp. is it possible to remove grubboot loader.
View 3 Replies
View Related
Apr 27, 2010
Does anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies
View Related
Nov 20, 2010
I have Ubuntu guest OS installed on Virtual Box on windows. But I have forgotten all passwords for user and root accounts. But when I try to get into grub by pressing escape at startup, nothing happens. How do I get into grub loader to change the password? Acually no grub menu is shown when it starts.
View 2 Replies
View Related
Jul 15, 2010
I had Fedora 12 and windwos 7 installed,today i reinstalled windows, and when i restart i dont get anymore the boot menu to choose between linux and windwos and i tried to reinstalled fedora but i am getting this error Grub Loader error 17,what can i do to solve this problem,i am new to linux
View 4 Replies
View Related
Jul 19, 2010
I have a mini tower that started life using only Windows XP, I converted it to dual boot Umbuntu 10.04 and Windows XP. So far, so good, since I was using a ps2 mouse and keyboard. My problem started when I converted to wireless keyboard and mouse.....the bios recognizes the keyboard, both operating systems recognize the keyboard and mouse....BUT!!, the grub loader recognizes neither. Now, I can get around this problem by 1. letting Umbuntu load by default or unplugging the USB connection device for the keyboard and mouse and replugging my old ps2 keyboard long enough to boot to the system that I want to use.
View 1 Replies
View Related
Feb 15, 2010
If at all possible I would like ot keep the GRUB loader and repair my situation.My slave drive has Windows 7. My master had Ubuntu on it. When it installed it added the GRUB loader.I replaced it with Fedora, but now the GRUB loader says it can't find the drive and bails to grub-rescue.If possible I would like to keep the grub loader. If I can't repair this, is there a way to uninstall it and reinstall it.
View 16 Replies
View Related
Oct 23, 2010
I have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;
Desktop -- openSUSE 11.3-2.6.34-12
Failsafe -- openSUSE 11.3-2.6.34-12
windows 1
windows 2
which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.
View 8 Replies
View Related
Apr 11, 2011
So I was running Linux Mint, then made a partition and installed Windows 7. But now I can't figure out how to get back to linux because there's no loader/dual boot option on startup, so it automatically goes to windows.
How would I go about installing this?
View 6 Replies
View Related
Oct 24, 2010
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7)
500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
View 8 Replies
View Related
Sep 28, 2010
I have an existing WinXP install on the main drive (/dev/sda) of a Dell laptop. I installed OpenSUSE 11.3 on the second (caddy tray) drive and didn't touch the existing windows partition during install.After install completed, I found there was no boot loader entry for WinXP during startup. Only SUSE-related stuff. I opened YaST boot loader and tried creating an entry of type "other" and device of "/dev/sda1" and set this as the default entry.The /boot/grub/menu.lst file now has an entry:Quote:
title Windows XP-32
rootnoverify(hd0,0)
chainloader (hd0,0)+1
[code]....
View 11 Replies
View Related
Oct 19, 2010
I have an internal disk with Linux installed and a removable drive bay for swapping out my windows disks. I'd like to get grub to map one option to the bay and be able to boot whatever disk is in there.
Right now it's mapped by id "/dev/disk/by-id/ata-ST3250310AS_6RY00KB61" but I noticed there is a by-path option. I am not sure how to use it and the documentation isn't very detailed. Is by-path a good way to do this or is there some other way to get this to work?
View 4 Replies
View Related
Aug 9, 2010
Installing upgrade from Open SuSe 10.3 to 11.3. I did it on a 32-bit laptop, aborted half way through and couldn't get back on because GRUB loader was corrupted. No problem as there are lots of 32-bit GRUB loaders available for download, install was successful 2nd time. I need to do the same for a desktop x64bit dual core Intel. Can't find a x64bit GRUB loader on internet - how do I extract from my current set-up an emergency GRUB-loader CD?
View 5 Replies
View Related
Oct 2, 2010
I need to create a bootable usb drive so I can repair or reinstall the grub loader.
View 2 Replies
View Related
Sep 21, 2010
install Ubuntu inside Windows in the first place, thinking that would be the easiest way to get him into Ubuntu. Now, I can't figure out how to repair his grub loader without killing his Windows XP installation.
I'm a Windows guy (have to be, I'm a gamer), so my knowledge of Ubuntu is limited to whatever I can do in the GUI. The command line is beyond me at the moment ('cause it ain't DOS). More so because I have an identical installation to his system (I built both), and I'm wondering if this is about to happen to me too.
View 3 Replies
View Related
Jun 18, 2010
I have 3 hard drives and have Ubuntu installed on one (sdb), had windows vista installed in the other (sda) and use the other (sdc) as a back up/extra space. I just deleted the windows vista partition and formatted the hard drive (ext4) and now just use Ubuntu, however, in the grub boot, vista and recovery is still showing up. How can I clean the grub up and delete these entries. I've searched all over the place, googled like crazy and all I can find is how to get rid of grub or reinstall the MBR of vista (etc). One more thing, how can I permanently mount the new empty hard drive in Ubuntu so that I have access to it all the time w/out having to mount it.
View 5 Replies
View Related
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Feb 4, 2010
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait...
Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
View 14 Replies
View Related
