General :: Deleting Vista Recovery Loader Shown In Grub For Ubuntu 10.04?
Jun 18, 2010
I have 3 hard drives and have Ubuntu installed on one (sdb), had windows vista installed in the other (sda) and use the other (sdc) as a back up/extra space. I just deleted the windows vista partition and formatted the hard drive (ext4) and now just use Ubuntu, however, in the grub boot, vista and recovery is still showing up. How can I clean the grub up and delete these entries. I've searched all over the place, googled like crazy and all I can find is how to get rid of grub or reinstall the MBR of vista (etc). One more thing, how can I permanently mount the new empty hard drive in Ubuntu so that I have access to it all the time w/out having to mount it.
View 5 Replies
ADVERTISEMENT
Mar 8, 2009
I have a laptop which was originally running Windows Vista, I attempted to install Windows XP on via USB since the laptop couldn't boot the install disk (this has turned out to be a bad disk drive. This fell flat on its back and wouldn't even finish the install (although not before formating the Vista install in to oblivion). Although I was extremely careful to leave the Vista recovery intact. So I managed to get Ubuntu 8.10 (XFCE if that makes any difference) installed over USB. I was wondering, Could I use the GRUB louder to boot into the recovery drive? Laptop is a Toshiba Equium L350D
View 7 Replies
View Related
Oct 17, 2010
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
View 4 Replies
View Related
Dec 31, 2010
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
View 9 Replies
View Related
May 14, 2010
I Dual-Booted (if im not mistaken is the term for installing two OS) Ubuntu 9.10 and Windows Vista. Using Ubuntu 9.10 as my primary OS and using Vista for some programming ( college stuffs ) Only a moment ago, i reformat/recovered my Vista and only i found out that, my GRUB loader has gone. I'm asking is there any way for me to install a GRUB loader using Vista?
View 7 Replies
View Related
Mar 21, 2010
I'm a CS Major that wanted to experiment with Linux more. Great idea right?! Well, long story short, I have a HP Dv9815nr Entertainment Notebook PC with Vista pre-installed. I have 2 local SATA HDDs and installed Vista(250GB) and Fedora 12(160GB)(respectively). In order to make life simple for booting purposes, I partitioned the Vista drive to include a 3GB sector for the Fedora Boot partition, so that Grub would run properly.
I recently discovered Sun's VirtualBox (Open Source Virtualization software) and installed several flavors of linux inside of this application on the Vista Disk. Naturally, I installed Fedora 12 in the Virtual Box and reformatted the Linux drive (160GB + 3GB Boot partition).
Everything was fine and then I rebooted. Now I get a Grub error on boot. "Error 22 : partition not found". I would like to restore the Vista MBR using the Fedora 12 Live cd, but I can't repartition the Vista drive under the live installation.
Also, I extended the Vista partition to include the 3GB previously used for the Fedora Boot Sector.
View 4 Replies
View Related
Aug 30, 2011
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies
View Related
Jun 29, 2010
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
View 9 Replies
View Related
Aug 19, 2010
I'm having an issue installing Ubuntu with Windows 7 Home Premium 64-bit through Wubi. The Wubi installation works great and Ubuntu seems to install after the first reboot after selecting Ubuntu from Windows' boot menu, however whenever I select Ubuntu from Windows' boot menu after Ubuntu installs and it reboots for the second time, it loads the GRUB bootloader, however Ubuntu isn't listed at all.
Windows 7 is listed twice and Windows Vista is listed (seems it picks up the recovery partition for Windows 7 as Vista) and when I select the first Windows 7 from the GRUB bootloader, it just goes back to Windows' boot menu with Windows 7 and Ubuntu as the selections. If I select the second Windows 7 from the GRUB bootloader, it'll boot Windows 7 like normally. It looks like Ubuntu is nowhere to be found. Because of that, I just ended up uninstalling it.
View 4 Replies
View Related
Mar 9, 2010
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies
View Related
Mar 4, 2011
On my notebook there was a preinstalled OEM Windows 7 Home Basic (disk C, sda1). I installed Ubuntu 10.10 on disk D, and was not using Windows 7 any more, although the "seventh" was present n main loading menu and in grub menu. 2 days ago I discovered, that in grub menu appeared "Windows Vista (Loader) - sda1" ! I didn't install it, and I'm sure that nobody else had access to my notebook. "Windows 7 (Loader)" now links to sda2.
When I try to run this strange "Windows Vista (Loader)", appears the Windows loading screen, than the empty Windows desktop background, and than the system reboots. How can Windows Vista (Loader) appear in grub, if nobody installed it? Can it be an imitation of Vista loader, made by some malware? How to remove this item from grub?
View 4 Replies
View Related
Nov 16, 2010
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
View 6 Replies
View Related
May 26, 2010
My cousin just deleted his Linux partition and another smaller partitio nand now Windows is not booting, no he does not have the recovery disc. When Windows tries to boot it goes to "GRUB" and says "partition not loaded". What are some GRUB commands? And is it possible to fix this without using the recovery CD?
View 1 Replies
View Related
Jun 6, 2010
I am new to knoppix. I actually have never used it. I was under the impression that I could change or recover my password on Windows Vista. I only have one user and it is the administrator. I am not exactly sure why it is no longer working. It is on a laptop and I have let others use it at times. don't know if someone may have changed when it was open at work or something. Every time I boot up and my user account comes up. I put in my password and it looks like it will log on but then comes back and says wrong password. I did see a way to do it with Windows 2000, and XP. Will that also work with Vista?
View 4 Replies
View Related
Mar 6, 2011
can't understand the whole /dev/sda stuffs ntfs limitation etc.Now my question is, how do i install properly ubuntu w/o killing the f9 recovery mode of eeepc. Cuz incase i want to revert back to windows i can just hit F9 at start up.I want to use the 1st partition as my ubuntu OS then second partition as my extra storage. But i dont know how to set it properly.Should i first change the SDA2 from ntfs to ext3 or 4? or fat 32 file system?then click install now to sda1 ntfsto install the linux and delete the windows xp?What is the Swap part in the partition? do i need it?if i convert the sda2 to ext3 will it still be just the same as fat32?
View 5 Replies
View Related
Sep 2, 2010
I have just bought a new computer and I want to partition it to be dual booting as I have done a few times in the past.
Currently (alternatively, see attached screenshot):
There are three partitions:
/dev/sda1: FAT16 DellUtility (takes very little space and is of no concern)
/dev/sda2: ntfs RECOVERY (takes up 17.58GB and is marked boot)
/dev/sda3: ntfs OS (the rest of the computer, on which windows is currently installed)
[Code].....
it is safe to delete the current boot partition. I am also not quite clear on when the recovery partition would be used and whether it is really all that necessary (18GB doing nothing seems like a lot to me). Should I make a system recovery media for windows before repartitioning? Also, I am not sure which type of ext partition to use. Finally, I am not sure how big to make the swap space. I think I recall the normal rule being twice the RAM (6GB RAM in my case), but 12GB swap space seems like a lot. Although I do sometimes run memory intensive programs (simulations for research). I normally use other computers for such simulations since they have far more RAM than my computer can possibly have even with a large swap space.
View 9 Replies
View Related
May 28, 2010
I'm running Suse 9 service pack 2. I have the recovery cd in the system and have issued the following command /sbin/mkinitrd -m "reiserfs aacraid mptscsih jbd ext3" -b /tmp/kevin/boot -d /dev/sda2
They system responded with : Root Device: /dev/sda2 (mounted on / as reiserfs) Module List: reiserfs aacraid mptscsih jbd ext3 You may have to update your boot loader configuration QUESTION: How do I update the boot loader from the where I am now?
Note: the reason that I need the bott information is because during maintenance the module reiserfs was left out the kernel file when the a previous mkiniterd command was issued cuasing /dev/sda2 not to mount and the system to go into a kernel panic.
View 1 Replies
View Related
Feb 24, 2011
What is the Windows Vista (loader) when you start your computer and have to choose the ubuntu or the other operating system your running. There are some other chioces too like ubuntu safe mode. But whats the loader? Ive never tried to use it since i have no idea what it does.
View 5 Replies
View Related
Nov 3, 2010
I had dual boot Win Xp and CentOs Linux. I have small harddisk and needed more space, so I removed CentOS linux with partition manager and rebooted. Now I can not boot my XP. All I can see is GRUB prompt. Keyboard do not respond except CTRL ALT DEL. I know I have to fixmbr. But I can not boot from my bootable XP CD. I can boot from CentOS linux DVD and enter into linux rescue mode. From that I typed "grub" entered into grub. Then I tried
root(hd0,0)
makeactive
chainloader --force +1
boot.
But it gives me some error. Can I boot my XP from CentOS DVD rescue mode?
View 4 Replies
View Related
Dec 28, 2010
I am planning to use EFI BIOS in my system with GRUB as the boot loader. Is it possible to use Grub loader with EFI BIOS?? If yes, whether Grub needs to be EFI compliant to use with EFI BIOS??
View 1 Replies
View Related
Nov 20, 2010
I have Ubuntu guest OS installed on Virtual Box on windows. But I have forgotten all passwords for user and root accounts. But when I try to get into grub by pressing escape at startup, nothing happens. How do I get into grub loader to change the password? Acually no grub menu is shown when it starts.
View 2 Replies
View Related
Apr 17, 2010
I've just came across something rather strange. I've been having a problem with GRUB 2 and Windows as highlighted in this thread:[URL].. Often when I attempt to access my Windows partition from GRUB I will get the Windows failed to start error, but today I may have found something rather interesting that may help me solve my problem. Sorry if it looks like im double posting, but im asking something different.
Basically when Windows fails to boot it restarts and when I attempt to boot it again I usually get the Windows failed to start screen with the option to run Startup and Repair when I ran it earlier, I suddenly saw the Windows Vista Loading bar, which is rather impossible as im running Windows 7. But my laptop came pre-loaded with Windows Vista as well as a recovery partition with Windows Vista on it. I thought I'd removed them both completely but now seeing the Windows Vista Loading screen says otherwise. It looks like some part of the Vista loader remains and well could be the cause of my boot issues. So im wondering how can I go about fully removing the Windows Vista Boot loader?
View 5 Replies
View Related
Dec 5, 2010
I want to dualboot my HP laptop with Windows 7 and Ubuntu. The problem is that the harddrive had 4 primary partitions. So i had to delete the Recovery and HP TOOLS partions. I did that after creating my system recovry CDS. The "install alongside another operating system" option showed up. And i was really happy for about 1 minute until i discovered that it said Windows Vista loader! So now i have this:
sda 640GB harddrive
sda1 Windows 7 loader
sda2 Windows Vista loader
And when im trying to install a dualboot the Windows 7 loader dosent show up! It wants to install Vista loader but i dont have that operating system. I have read that 7 and Vista sometimes gets mixed up in GRUB can this be the case here? Is it safe for me to install Vista loader with Ubuntu 10.10?
View 9 Replies
View Related
Jun 15, 2011
On the boot up to the Grub loader screen my monitor (Acer X193w) displays a "screen resolution not supported" message in a floating window, even though the Grub screen itself is displayed. It appears as a flattened rectangle, like wide screen format films on a TV (black bar top and bottom), the floating message on top of it. Once Debian is selected and boots, obviously my xorg.conf takes over and sets the 1440X900 resolution and everything is fine. But the Grub start up bothers me. How do I set the resolution of the Grub loader screen?
[Code]....
View 2 Replies
View Related
Jul 12, 2011
i have a Computer with windows vista and Ubuntu dual booted, the thing is i upgraded to win 7 and now the grub loader doesn't show up. Ive tried all the usual fixes but i cant fix it all i need is a CD ore something to get me into the Linux install
View 5 Replies
View Related
Nov 27, 2009
I have 2 os redhatlinux 5.1 and windows xp. is it possible to remove grubboot loader.
View 3 Replies
View Related
Apr 27, 2010
Does anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies
View Related
Sep 21, 2010
install Ubuntu inside Windows in the first place, thinking that would be the easiest way to get him into Ubuntu. Now, I can't figure out how to repair his grub loader without killing his Windows XP installation.
I'm a Windows guy (have to be, I'm a gamer), so my knowledge of Ubuntu is limited to whatever I can do in the GUI. The command line is beyond me at the moment ('cause it ain't DOS). More so because I have an identical installation to his system (I built both), and I'm wondering if this is about to happen to me too.
View 3 Replies
View Related
Feb 9, 2009
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
View 9 Replies
View Related
Aug 14, 2010
I'm using dd to clone a Windows Vista hard drive and recovery partition with zero luck. I duplicated the partitions with gparted then used dd to copy each partition and then the master boot record. Nothing............. no boot.
Code:
dd if=/dev/sdb1 of=/dev/sda1
Code:
dd if=/dev/sdb2 of=/dev/sda2
Code:
dd if=/dev/sdb of=/sda bs=512 count=1
View 3 Replies
View Related
