CentOS 5 Hardware :: Screen Goes Blank With Intel Motherboard - Not Even Grub Loader Shows Up
Jun 8, 2010
First time I am having issues with Centos.
I bought a Intel DQ45CB LGA Q45 Micro ATX Motherboard and I am installing the 64 bit version of centos.
The install of Centos goes just fine. However when I first try to boot up, after post is done, I get a blank screen. I do not even get on the Grub screen. No access to any of the ttys. No access to anything, files, folders. I only get a blkinking cursor, no command prompt, nothing.
This happened with Centos 5.2 and 5.3
Just for the hell of it, I installed XEN Xitrix and I have no issues like that.
I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
I have Microsoft Office 2003 installed through Wine. However, all applications work fine but the outlook mail setting is not working as the POP setting screen becomes blank. Same with datafile (pst) setting screen.
Screenshots can be seen at the below link: http://img37.imageshack.us/img37/295...ilaccounts.png http://img17.imageshack.us/img17/295...ilaccounts.png http://img359.imageshack.us/img359/7...ilesetting.png
Can someone please help me get this right. I am very new to Ubuntu and want to stay on Ubuntu but Outlook for me is a must have (I tried evolution but decided to stay with outlook).
After all the package upgrading, removing obsolete packages, running lilo etc, I rebooted and I was really taken by surprise. Apparently, this certain intel graphics card doesn't work right with KMS. The boot process starts, I get to see the two tux twins and a few lines of boot messages, but as soon as KMS kicks in, everything goes completely blank. It doesn't crash or freeze or anything, the boot process continues, but it's all blank.
What's completely weird is that I have another laptop, which reports exactly the same graphics card, but KMS works fine there with current!
Anyway, I did some google search and I found that it's a common problem. There was a suggestion to remove any vga=... lines from lilo.conf, but that didn't help at all. Adding nomodeset to my boot options, disabled KMS, and I was able to boot to init 3, just like in 13.0. The problem was that then, it wasn't possible to launch X, because the intel driver that is included in current requires KMS to work!
So, after trying out a few different versions of the intel driver, I found that anything from 2.8.x and down wouldn't compile and that anything after and including 2.10.x require KMS. The only versions that would work are 2.9.0 and 2.9.1, which seem to have an identical effect here. They both work, but I have artifacts using my favorite mouse cursor theme, I get a black box instead of the mouse cursor. Not a big deal and choosing another theme fixed that too.
What I'm thinking is that probably more people will have the same problem and nothing is more frustrating than a completely blank screen. Maybe it would be a good idea to keep the 2.9.x versions of the driver in /extra. That and perhaps also add a note in the UPGRADE docs about adding nomodeset if you have an intel graphics card and you get a blank screen.
I just bought a new Dell Studio Laptop with Intel i5 64 bit processor with Windows 7. I installed ubuntu with in my Windows 7 through CD and also tried to run it by installing it on Pen drive. But it just boots perfectly but get stuck with blank screen after that.
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR? Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
I have just received my new laptop - a Thinkpad x121e, with Intel (Core i3).
I am trying to put ubuntu on it, but i am having some problems with the 64 bit live USB.
When i run the USB i get i get a GRUB-looking screen, with options to:
Quote:
1. Try Ubuntu without installing 2. Install Ubuntu 3. Check the disk for errors
Wanting to repartition my hard drive (using GParted) so that i can dual boot, i Quote:
Try Ubuntu without Installing
, at which point the screen goes blank and nothing happens. I am then forced into a hard reboot. I get the exact same result when i pick
Quote:
Check the disk for errors
from the GRUB-like screen
To check the live USB, i tried it on my old laptop (32bit, Celeron M). When i did so i got a purple screen with an image of what looks like a keyboard and a man at the bottom, and then a message telling me to try a kernel which matches with my machine's architecture.
I then tried a live USB with 32 bit ubuntu and the live USB works fine - i am sending this email from this live instance running on my new Thinkpad. The same can be said for a 32 bit Mint live usb which also worked on the Thinkpad.
So i am not sure what is going on. If anyone could tell me why the 64bit live USB is not working, it would be great as i'd like to get it up and running. The only thing i could think of was that i have downloaded the amd64.iso, and this is an intel machine. Having said that i see that all the sites on the web suggest that this shouldn't make a difference (if it does, where might i get an 64 bit version for intel). In addition i am not sure why, if this was the problem, my old celeron laptop brings up the error message while the new machine just hangs.
I have a new Dell Latitude e5510 with Intel integrated graphics processor in I3, the model should be something like HD mobile Intel GMA integrated graphics (not able to find more precise details even under Windows using everest).
Trying to install Ubuntu 10.04 from livecd this returns me a black screen after I choose to try ubuntu. I already tried to use options as well nolapci nomodeset but without results. The screen lights up the backlight is on and I go into kernel panic because starting to cycle on and off repeatedly icons keypad lock and block number.
On the boot up to the Grub loader screen my monitor (Acer X193w) displays a "screen resolution not supported" message in a floating window, even though the Grub screen itself is displayed. It appears as a flattened rectangle, like wide screen format films on a TV (black bar top and bottom), the floating message on top of it. Once Debian is selected and boots, obviously my xorg.conf takes over and sets the 1440X900 resolution and everything is fine. But the Grub start up bothers me. How do I set the resolution of the Grub loader screen?
I have a new laptop, I first installed Debian stable, but the wifi card didn't work, and the screen was 1024x768. So I installed kernel up to 3.16 with wheezy-backports, but after the boot, the screen become blank. The only way to see the screen is set "nomodeset" in /etc/default/grub, but It's impossible to see the screen beyond 1024x768 resolution.
I also tried to install linux-image deb packet from [URL] .... , because it worked for someone in internet, but not for me.
I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.
Lucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
When openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
I was playing with my netbook and trying to hackintosh it only to realise mic, webcam and network don't work. So I restored the entire disk ubuntu 9.10 from a Ghost image I had made prior. But it doesn't boot, it only shows the word GRUB on top left corner.
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode) How do I fix this and Im wondering if it is a hardware problem?
Loaded the OS using the Windows Installer as recommended in Smart Computing. When the system finished loading and I rebooted into Ubuntu the screen showed GRUB... Can't figure out how to load Ubuntu from the GRUB screen.
Anyway one day I start my computer and instead of starting normally it comes up with a screen which says GNU GRUB version 1.97~beta at the top. I selected the option Ubuntu, Linux 2.6.31-19-generic as I figured this is what normally loads without being prompted in the grub menu, but after this I got the ubuntu logo for a few seconds then my screen goes blank. My laptop is a hp510.
I've been using Ubuntu on and off ever since about 8.04. This newest release (10.04)... wow it's amazing. That's all I can say. The only gripe I have right now is that right after I select Ubuntu from GRUB, the screen goes black for about 10 seconds, then goes to the bootscreen. By the time it gets to the bootscreen, the bootscreen is shown for about 3 seconds, and then I get the lockscreen. I have a nVidia card with proprietary graphics drivers installed.
I have an HP computer nvidia and AMD stickers on it and 1GB RAM. HDD is Parallel ATA. I downloaded both Ubuntu & Kubuntu Live CD. Both live CD's boot to a blank screen. After a (seemingly) successful install of kubuntu, the screen goes blank after GRUB.
Here are the details: With this HP, when i boot from ubuntu live CD the screen goes blank. It does not give any option about trying ubuntu, install, ubuntu, mem test. I just get a blank screen. On my ASUS laptop the ubuntu live CD goes straight into ubuntu live (without having to choose an option). It is not the CD When I boot from kubuntu live cd i get to the screen where i have an option to try kubuntu, install kubunt, memtest..
If I choose either try or install, my screen just goes blank & never progresses. Again, this live CD works on my ASUS laptop. At the bottom of the boot screen for the kubuntu live CD i noticed f1-f6 configurations. I was unable to change any other than language and f6 options. If I press f6 i get options which i can mark with an x. I don't know what any of these mean but I checked all of them and then on the boot menu popped up
BOOT **a whole bunch of text** I went onto install kubuntu and it no longer went to a blank screen. Rather it was a fuzzy grainy splash with the word KUBUNTU and loading dots underneath. Atlas it seemed to prevail, the installation process started (fuzziness went away). The installation screen now looks just as it did on my ASUS laptop. I continued through the steps with an installing on the entire HDD. The installation completed (with no signs of error). Screen said take out disc press enter.
I did so and my computer turned off. I power up the computer and the GRUB loads up. I have option of regular and fail safe. Both lead up to a blank screen. My monitor seems to think there is no signal and goes into standby mode. Perhaps the video card is not rendering correctly or not compatible.
And by blank screen I mean after I pick whatever I want on GRUB. There's NOTHING.I even tried going in recovery mode. But same thing.Right now I'm using an older recovery. The newest thing is completely broken. And the regular one for the Ubuntu version doesn't work either.
