General :: Get The Wicd Daemon To Disconnect Wireless Network From The Command Line?
Mar 14, 2011
I'm thrilled using wicd to connect to wireless networks. But when I suspend my laptop using the special keys, I just want to disconnect from wireless without having to use any kind of GUI or curses user interface. It says in the documentation that wicd works by sending DBUS messages, so presumably it's possible to write a command that talks to the daemon directly.But I can't figure out how.Does anybody know by means of what shell command I can tell the wicd daemon to disconnect me from my wireless network?
View 2 Replies
ADVERTISEMENT
Sep 23, 2010
The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
View 3 Replies
View Related
Nov 4, 2009
I run Ubuntu, and it has a nice GUI widget thing that connects me to my home wireless network when I boot. I don't have a problem with that. But suppose I don't start X, and boot to a recovery console for some reason, like I did recently when my graphics were broken after installing Karmic. In that case, my computer won't be connected to the wireless network until I log into X normally. So I can't apt-get anything or anything. It's very annoying. And I don't know how to connect to my wireless network.
I know my wireless network SSID, and I know my WEP key or WPA passphrase. How can I log onto the network with commandline tools? Is there some basic program that I can just run "networkmanager <myssid> <mywepkey>"? I looked at the iwconfig man page and I honestly couldn't figure out how to simply connect to my network. Once I figure out how to connect to the network with command-line tools, where can I put an "autoconnect" script so that it will connect during startup, like it should anyway?
What I don't understand is, why the Ubuntu network manager nm-applet, doesn't just work as a front-end for more basic networking stuff. I don't see any reason why it should require you to start X before working; it could be a daemon that runs at startup, and there could be a config-file somewhere, but it doesn't even start running until I log onto gnome.
View 16 Replies
View Related
Apr 18, 2010
I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.
Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.
View 2 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
Aug 17, 2009
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
View 4 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Feb 27, 2011
I have a CentOS 5.5 server running currently with a Netgear gigabit ethernet card and for wifi I have a wi-fi card with the chipset: RT2860.Now I have gotten the ethernet card and wi-fi card working but my main question is: How do you bridge the connection between the ethernet card and the wi-fi card to create a wireless network with a hidden ESSID if possible and WPA encryption? (So the server basically acts as a wireless router as well as doing all the other stuff I need to do on it).
View 2 Replies
View Related
Jul 31, 2010
I recently installed Ubuntu 10.04 on my Acer TravelMate 3270 notebook (with Windows 7 dual boot) for everyday use. All is great except i started to notice my Wireless Network get disconnected and then reconnects every 5 minutes or so. Also the NetworkManager Applet 0.8 keep annoying me with the notifications that its disconnected and then reconnected.
I do not have this issue while using Windows 7 (in the same area). Can this be fixed. As i really want to move my day to day computing need to Ubuntu.
View 1 Replies
View Related
Oct 20, 2010
This question may seem to be odd.. but I amnot able to figure out how to setup a wireless network with wicd..
View 3 Replies
View Related
Nov 10, 2010
I have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
View 3 Replies
View Related
Jul 25, 2010
I was wondering how to connect to wireless in a Linux command line environment -> I'm looking for a ncurses like program to do this, not a bunch of commands and files to edit.
View 2 Replies
View Related
Mar 5, 2010
After I upgraded to current(Tue Mar 2 19:07:31 UTC 2010), I could not connect to any wireless network. It will always failed in obtaining IP address. When I rebuild the package and upgrade with the new one, the problem gone. Also I notice that the package I rebuild is different with the one on the stock tree:
Code:
..ckware-mirrors/slackware64-current% md5sum /tmp/wicd-1.7.0-x86_64-1.txz
446ff631eee4c862263ad0488e3a38be /tmp/wicd-1.7.0-x86_64-1.txz
grissiom 2010-03-05 17:21 @darkstar
[code]....
View 6 Replies
View Related
Feb 20, 2010
If i do
Code:
su
password:
cd /etc/rc.d
chmod 644 rc.wicd
chmod 644 rc.wireless
will it do the job?
View 5 Replies
View Related
Jan 18, 2011
How do I install Broadcom Wi-Fi on Arch Linux in command line mode on an Acer eMachines EM350?
I assume that Broadcom STA should be the driver used and my USB key the way to install it with the help of another PC, assuming that I can't use a RJ45 ethernet connection on LAN.
View 1 Replies
View Related
Jan 26, 2010
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies
View Related
Feb 17, 2011
As a strategy for learning linux I have decided to adopt using a lean windows based approach. I want to focus on command line machine system, network basics, and file management knowledge. In other words find out how desktop manager does it's business, so I know how to master my machine, but by and large once I have made my choices, leave it alone to do just that.
I figure I should know how applications are internally configured etc., but I also figure an apps GUI and config choices should take care of installations, and program usage as in M$ windows. Surely taking care of an applications dependencies are the responsibility of the developer, are they not?
I am working my way through "Rute User's Tutorial and Exposition (Version 1.0.0)" right now for an overall viewpoint. Can anyone suggest a specific source for a point by point explanation of the command basis of a generalised "desktop management" application (KDE,LXDE)? Better yet would be if it had some parallel comparison of the varied approaches taken by different distributions of linux.
A secondary question, is that allowed? Up to a certain point in Ms windows, a thorough knowledge of DOS 6.xx would theoreticaly enable one to more or less duplicate the actions of the windows overlay. Is there a basic distribution (or subset in all of them maybe?) of linux that would be consistent with that paradigm? What would be analogous to DOS batch files, or GM-Basic? Oh! that's 3.I am certainly appreciating the depth of this forum, and the breadth of knowledge among you forumite's. Reading it is time well spent.
View 7 Replies
View Related
Mar 9, 2011
I am using tcp for data transmission between 2pcs running linux.During transmission, I have noticed that if I unplug the network cable and reinsert it quickly,connection is not lost(same as i expect)and the sender start to resend the packet after 5s(what i expect is that network packets sent immediately after quick physical disconnect and reconnect).My question is can i reduce 5s to 0s(resend immediately after network cable reconnect)?Any parameters(tcp rto,txqueuelength,..) can be modified to achieve this condition?
View 10 Replies
View Related
Sep 27, 2009
Newish to linux, been using Ubuntu for about a year, moved onto Sabayon 4.2 now. I also have another laptop with Kubuntu that is using Network Manager, it has no problem connecting to my wireless, one wireless uses WEP and one uses WPA 2. When my main laptop used Ubuntu it was using Network Manager, that connected with no problem. However Sabayon seems to have a problem. Initially I thought it was the DVD that I used to install it in, but after re-burning it and installing from fresh the problem still remains. What happens is that NM when connecting to a wireless prompts for a passkey, I enter it in and it fails right away.
This happens for WEP and WPA. If the network is unsecure then it connects with no problem. So I emerged WICD 1.6 to see if that would work, it hangs on 'Obtaining IP Address'. If I put static IP then it connects, but this cant be an option as at my University campus I cant set a static IP. I have tried to find the log file for NM, but cannot locate it. I understand that it should be located in /var/log/daemon.log, but daemon.log does not exist on my system. I checked every NM directory and could not find any log files. I have tried changing the settings in WICD to no effect.
View 3 Replies
View Related
Jan 20, 2011
I have a minecraft server running as a daemon. When you run it normally (not as a daemon), you can type commands into the console. How can you get to the console so I can send it commands while it's running as a daemon?
View 1 Replies
View Related
Jul 30, 2011
Presently have installation of 11.3, win 7, and Ubuntu 10.04 in a multiple boot. Win 7 and 10.4 are connected wirelessly, no problem getting on line.I know little or nothing about wireless as I created a network in win 7, installed Ubuntu and it recognized my network immediately and I was on line effortlessly Suse was a first choice and its been on my HD a while with no access. So this will be my last shot to gain some insight to getting it on line.
View 4 Replies
View Related
Aug 26, 2010
I'm having this problem, when I close the top of my notebook and later re open I find that my wireless connection got disconnected, which is very annoying since I can't make large downloads...(I'm on OpenSuse 11.3)
View 1 Replies
View Related
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
View 1 Replies
View Related
Mar 2, 2010
I have a dell insp 1545 windows7-ubuntu9.10 dual boot. the linux os would not activate the wireless network function in the network manager (but the cricket broadband was being detected and was in fact active). well, i did a little looking around and found another network mgr (wicd?, i think it's called... or something like that) and installed it. IT is working, but now the cricket broadband is down, which is my mainstay internet connection right now. i'm thinking that maybe it's got something to do w/the flipflop.sh function but that's just a wild guess.
View 1 Replies
View Related
Feb 24, 2011
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
View 5 Replies
View Related
Aug 22, 2011
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies
View Related
Jun 16, 2011
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons)
- I'm using Fedora 13 with KDE and Gnome some specs:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945
[Code]...
View 1 Replies
View Related
Jun 21, 2010
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies
View Related
Jan 17, 2011
I want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
View 2 Replies
View Related
Jul 31, 2011
I stupidly turned off my computer as I was updating to KDE 4.7. Now when i start it i get to the log in screen, but imputting my username and password just causes the Xserver to restart and i get back to the log in screen.I know there are many other packages I should install as part of the update and i think this will solve my problem, so i am trying to connect to wireless through the command line login, and then install the updates.
View 2 Replies
View Related
