Ubuntu :: Command Line Interface Connecting To Wireless
Jul 31, 2011
I stupidly turned off my computer as I was updating to KDE 4.7. Now when i start it i get to the log in screen, but imputting my username and password just causes the Xserver to restart and i get back to the log in screen.I know there are many other packages I should install as part of the update and i think this will solve my problem, so i am trying to connect to wireless through the command line login, and then install the updates.
View 2 Replies
ADVERTISEMENT
Jun 21, 2010
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies
View Related
Apr 6, 2011
I've been familiarizing myself with the command line and am attempting to connect to a wireless network but am getting stuck at the point wherein I need to put in a password.When I run iwconfig I see my card is wlan0.I definitely know my password as I can connect using a GUI. The encryption method for my network is WPA2.Could someone tell me how I could connect to a WPA2 secured network via a command line, and/or where I went wrong with what I've been trying?
View 1 Replies
View Related
Jul 25, 2010
I was wondering how to connect to wireless in a Linux command line environment -> I'm looking for a ncurses like program to do this, not a bunch of commands and files to edit.
View 2 Replies
View Related
Nov 4, 2009
I run Ubuntu, and it has a nice GUI widget thing that connects me to my home wireless network when I boot. I don't have a problem with that. But suppose I don't start X, and boot to a recovery console for some reason, like I did recently when my graphics were broken after installing Karmic. In that case, my computer won't be connected to the wireless network until I log into X normally. So I can't apt-get anything or anything. It's very annoying. And I don't know how to connect to my wireless network.
I know my wireless network SSID, and I know my WEP key or WPA passphrase. How can I log onto the network with commandline tools? Is there some basic program that I can just run "networkmanager <myssid> <mywepkey>"? I looked at the iwconfig man page and I honestly couldn't figure out how to simply connect to my network. Once I figure out how to connect to the network with command-line tools, where can I put an "autoconnect" script so that it will connect during startup, like it should anyway?
What I don't understand is, why the Ubuntu network manager nm-applet, doesn't just work as a front-end for more basic networking stuff. I don't see any reason why it should require you to start X before working; it could be a daemon that runs at startup, and there could be a config-file somewhere, but it doesn't even start running until I log onto gnome.
View 16 Replies
View Related
Aug 14, 2010
I've been having issues setting up the wireless interface on my Ubuntu server (command-line only, no GUI) and I can't seem to get it working. It seems as though the card is recognized, the drivers are installed and the interface is up, but it fails to connect. I have no idea where I'm going wrong. I have WPA and a MAC filtering setup on my wireless router. An exception has been made for this PC's MAC address and I've manually entered the connection details into /etc/network/interfaces.
[Code]...
View 2 Replies
View Related
Apr 18, 2009
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
View 1 Replies
View Related
Jan 8, 2010
I am trying to do a command line installation.Finished the installation and my wireless card wasnt working.Did a "sudo ifconfig wlan0 up" and got it working.But for some reason wireless-tools is not installed thus I dont have iwconfig, iwlist, etc.The wireless works and connects fine off a liveUSB.So I am going to give info from this liveUSB run and maybe someone can suggest how I can set the right settings on the Command Line Installation I presume in the etc/network/interfaces.
View 1 Replies
View Related
Feb 4, 2010
So I just partitioned my hard-drive, one side with windows the other to set free for ubuntu. It all worked fine. I put in the liveCD of ubuntu 9.10 and installed on to the partition. However, I have a problem. When it boots up it asks me to either boot into linux 2.6 or windows 7. Windows 7 works fine, but when I boot into ubuntu, the loading screen comes up and then it doesn't seem to boot into GDM. It's all command-line interface. I've tried sudo apt-get update and upgrade, but it isn't connected to my network yet so I can't do that. What can I do?
View 9 Replies
View Related
Aug 12, 2010
Occasionally Lucid boots to what I can only describe as a command line desktop-ie the whole screen is like a terminal, theres no GUI, have to restart by hitting the power button. Is there anyway I can stop it, or start the GUI from there?
View 4 Replies
View Related
Nov 6, 2010
I am doing a school project in which I want to get the bandwidth of a network interface at any given second, or some other small increment of time. I need this for a Perl script I am working on. Therefore it needs to be non-interactive and just prints results.
View 2 Replies
View Related
May 11, 2010
For reasons that are not terribly interesting I decided it would be a great idea to remove and re-install the xserver-xorg package. Which proved to be a much larger mistake than I imagined it would be. I purged the package, and then restarted.Naturally I need to have an internet connection to use apt-get to reinstall xserver-xorg, which is where my idea falls apart.I followed the directions in the How To: Manual Network Configuration. However, after I enter the command "sudo dhclient wlan1" I get the line "wmaster0: unknown hardware address type 801" twice prior to the output that the above link shows. Then I just get DHCPDISCOVER messages until I get a "No DHCPOFFERS received. No working leases in persistent database - sleeping."
I'm connecting with WEP to a router that I know works (because I'm using it to type this on my laptop right now) and I know that the wireless adapter(RTL8187) is installed properly because it automatically connected to my network when I had xserver-xorg still installed.I'm running ubuntu 9.04.I've searched for a few hours and I'm no closer to resolving the issue.
View 9 Replies
View Related
Aug 22, 2011
I'm developing in java.
I want to create a GUI interface for some command line commands (drush - drupal).
How can I interact with the command line commands with java? or any other languege?
View 6 Replies
View Related
Dec 21, 2010
I have a service which I want to run over eth1.
But all my other traffic still needs to run over eth0.
Is it possible to force a command-line tool or other application to use the non default interface?
View 2 Replies
View Related
Apr 23, 2010
I am playing with various characters in the command- line interface trying to learn what they mean and when i should use them.
View 7 Replies
View Related
Jun 8, 2011
Is there any command which could help me to determine which host name (domain name) an IP is connecting to from the command line?
View 5 Replies
View Related
Jan 19, 2011
I have installed Ubuntu 6.06 LTS via the command line interface. I installed onto Microsoft Virtual PC on the mac. The installation completed successfully. On first boot, I see the text is spread out very wide on the screen. It's like the screen has been zoomed out greatly.
I assume I have to modify the x11 configuration, but I forget how to do this.
Here is an image of the screen:
I tried installing a more recent version of Ubuntu but ran into other troubles. more on that later.
View 5 Replies
View Related
Mar 23, 2010
if its possible to change font size or style on CLI.
View 9 Replies
View Related
Jan 18, 2011
I need to use some PCs located on my university from home through the internet. I am using a program called Teamviewer [URL]... The problem is that this program transmits the whole graphical interface, which is slow, but I just need to use the command line with these computers. I am aware of ssh, but my university won't give me access to theses computers over the internet.
View 9 Replies
View Related
Apr 22, 2010
I have ndiswrapper installed, and have successfully installed the drivers, I have also used nm-applet (and x forwarding) to configure wireless connections. My problem is that I want to reboot and unplug my wired connection and use just my wireless connection, but when I reboot it doesn't seem to connect to my network.
is there a command line tool or an independent tool that i can launch forwarding x I can use to search for and connect to wifi networks that would also have the ability to save configuration so that when I reboot the system automatically connects to my wifi?
View 2 Replies
View Related
Mar 10, 2011
Is it possible to carry out mysql commands directly from the ubuntu cli rather than open mysql?eg to create a database I would normally type
Code:
user@localhost:~$ mysql -u root -p
then INSIDE the mysql CLI I would type
[code]....
View 3 Replies
View Related
Jan 17, 2011
I want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
View 2 Replies
View Related
May 14, 2010
Without Gdm (The GUI Desktop running), or an Internet connection, how does One get pppd or wvdial to connect to a wireless broadband modem?I'm SURE this can be done with any modern Distro without additional downloads...but seem to be missing some crucial step...? I've been trying things like: (scrips for pppd and chat and ln {links} ttyACM0 to /dev/modem?) the modem is definitely on ttyACM0.
ln -sf /dev/ttyACM0 /dev/modem
/etc/ppp/chat-script
#!/bin/sh
[code]....
View 1 Replies
View Related
Oct 11, 2010
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
View 2 Replies
View Related
Jul 6, 2011
I wanted to run a little media server in my house, shared with my laptop only, so I could free up space on my laptop drive. I took one of my Linux boxes out of my render farm and loaded up a minimal install, command line only of Ubuntu Lucid from the mini ISO (32 bit). I had to plug in a lan cable to install, but I wanted to move my box back out to the "farm" that doesn't have wired access to my intranet.
After much research, trial and error, this is what worked for me. My wireless card uses an Atheros AR5001X+ chip, and it works with the desktop cd out of the box. I found the "just works" desktop install uses the ath5k driver that is now included in Lucid, but I'm not using a desktop or window manager. I haven't tried this on server version, if you do, let others know what you had to install to get it to work.
The things I do tell you about, I instruct you as if you are a newbie, however I have left out some things that users should know or be able to lookup easily, like if you want a static address instead of using dhcp. You may not need all of the steps or you may have to do more research and troubleshooting.
Find your wireless card (you may need to lookup what to do if it is not recognized at all)List all pci devices, only show network devices (-v verbose, -vv very verbose): >>lspci -vv | grep Network List all hardware (| less lets you pause at each page - arrow keys, page down/up to navigate, q to quit) >>lshw | less
[Code]...
View 1 Replies
View Related
Jun 16, 2011
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons)
- I'm using Fedora 13 with KDE and Gnome some specs:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945
[Code]...
View 1 Replies
View Related
Jul 27, 2011
So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI
so far i have done this, but im not sure what to do after this
Nexus:~ # ifconfig wlan0 down
Nexus:~ # ifconfig wlan0 up
Nexus:~ # iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[Code]...
View 5 Replies
View Related
Jan 7, 2010
I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies
View Related
Sep 14, 2010
I have a netbook and the wireless card on it works fine. Whenever I wake it up after suspending for couple of hours, it seems like the wireless card is not awaking or the drivers are not working properly because I do not see any wireless networks after waking it up(for example in Wicd). If I do fresh restart, the wireless and wireless networks come back at the same place. So I am wondering if it is possible to restart the wireless card or the driver without restarting my netbook
View 13 Replies
View Related
Jul 10, 2009
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
View 2 Replies
View Related
