Slackware :: Wicd In Current Won't Connect To Wireless Network - Fixed It With Rebuilding?
Mar 5, 2010
After I upgraded to current(Tue Mar 2 19:07:31 UTC 2010), I could not connect to any wireless network. It will always failed in obtaining IP address. When I rebuild the package and upgrade with the new one, the problem gone. Also I notice that the package I rebuild is different with the one on the stock tree:
Code:
..ckware-mirrors/slackware64-current% md5sum /tmp/wicd-1.7.0-x86_64-1.txz
446ff631eee4c862263ad0488e3a38be /tmp/wicd-1.7.0-x86_64-1.txz
grissiom 2010-03-05 17:21 @darkstar
[code]....
View 6 Replies
ADVERTISEMENT
May 24, 2011
I just upgraded to 13.37, and for some reason wicd now cannot connect to my wireless point. It keeps saying the password is wrong, when I know for an absolute fact that it is correct (even changed the password to '1' just to make sure, and no dice. Which is weird because even though its the exact same version of wicd, and not only that, it no longer seems to be able to see networks with my built in card, so having to use a USB card. Anyway, googling turned up very little. Seems to be a common problem across distros, and some people reported that downgrading to 1.6.x fixes it.
So, I ran
Code:
removepkg wicd
And it uninstalled wicd. Downloaded wicd-1.6.2.1-x86_64-1.txz from a 13.0 mirror and did
Code:
installpkg wicd-1.6.2.1-x86_64-1.txz
While in the correct directory. It installed, and I ran wicd. But checking the version number when it loaded, it says its 1.7.0 again.
Not really sure why this happens. I'm assuming there's some remnant of wicd that removepkg doesn't dump, and its preventing me from installing this older version of wicd. What do I need to do for this? If anyone has a surefire way to make 1.7 work again, that would be fine.
View 7 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
May 2, 2011
I recently installed wicd on a notebook with Squeeze. I can connect to the wireless network at my place. However I cannot connect at my friend's place. It timed out with the message: "Connection failed. Cannot obtain ip address."
It is a Thomson router/modem and the key is a 10 digit 64bit Hex. I did not see 64bit Hex option in wicd. So, I tried all 3 WEP options and none of them worked. We can connect to the same network with another computer with Squeeze and NM and also with Windows. This is the first time I am using wicd.
View 2 Replies
View Related
Sep 27, 2009
Newish to linux, been using Ubuntu for about a year, moved onto Sabayon 4.2 now. I also have another laptop with Kubuntu that is using Network Manager, it has no problem connecting to my wireless, one wireless uses WEP and one uses WPA 2. When my main laptop used Ubuntu it was using Network Manager, that connected with no problem. However Sabayon seems to have a problem. Initially I thought it was the DVD that I used to install it in, but after re-burning it and installing from fresh the problem still remains. What happens is that NM when connecting to a wireless prompts for a passkey, I enter it in and it fails right away.
This happens for WEP and WPA. If the network is unsecure then it connects with no problem. So I emerged WICD 1.6 to see if that would work, it hangs on 'Obtaining IP Address'. If I put static IP then it connects, but this cant be an option as at my University campus I cant set a static IP. I have tried to find the log file for NM, but cannot locate it. I understand that it should be located in /var/log/daemon.log, but daemon.log does not exist on my system. I checked every NM directory and could not find any log files. I have tried changing the settings in WICD to no effect.
View 3 Replies
View Related
Jun 7, 2010
I recently swapped from ubuntu to slackware. It's all functioning, minus the wireless network. Decided to forgo my usual fluxbox desktop for the features in KDE until I get ready to swap back (not sure what programs I'll have to add to startup in flux yet). I'm using a toshiba satellite L305-S5957 with a Realtek 802.11b/g wireless-LAN adapter. Not sure if it's a hardware problem or if I just don't know how to connect with kde.
View 14 Replies
View Related
Oct 1, 2010
I installed the new Slackware 13.1 64 on my laptop and I am trying to connect to the internet via a wireless network but i don't what is wrong with my configurations it just doesn't work.
I tried doing the following:
iwconfig wlan0 essid "ESSID"
iwconfig wlan0 key "Password"
iwconfig wlan0 channel NUMBER
Then i do dhcpcd -d but then no success after - i try to ping some sites, no reply, i put new dns servers in resolv.conf, still no results, i tried to ping some ips and it says network unreachable, it just doesn't work at all.
I did iwlist wlan0 scanning and it found all the wireless networks, so the adapter is not the problem, the problem here is the procedure. How to do it properly so it will work ? I can connect via ethernet by easy configuring eth0 but i have no success for wireless networks. I read everything there was on google, i searched a lot of sites, i tried a lot of different methods but NONE of it worked.
View 8 Replies
View Related
Jun 25, 2011
I am running Natty on a Lenovo T410. I can connect to wireless with no problem using the panel applet but not using wicd. syslog shows it trying to get a DHCP address and finally timing out with no lease offers. I think a big clue is that if I monitor wlan0 using wireshark I get no traffic at all when it tries to connect, whereas with the applet I see the dhcp traffic. It seems as though wicd is connecting to the wrong wlan0. Running "dhclient wlan0" directly gives the same behavior as wicd. I need to use wicd because I typically run enlightenment so can't use the ubuntu applet.
View 5 Replies
View Related
Dec 25, 2010
I'm at a family member's house for the holiday and was trying to use their wifi. Its a WEP connection (I tried to tell them to change but they won't listen). In the wicd connection manager, I see their network, set the encryption to WEP (passphrase), enter the password, and hit connect. It says bringing up the card, checking authentication, then gets to Acquiring IP address, sits there for a minute, then times out saying unable to connect.
I know I used the right password because it passed the Authenticating part (tested with a wrong password that hangs at this point). I know that my wifi card works because I used a store's unsecured wifi connection through wicd. I know the wifi network works because my brother's windows netbook can get on just fine. I'm running through the same router right now with a wire instead. Why I can't connect wirelessly?
View 4 Replies
View Related
Mar 10, 2010
My area does not have broadband, but I am able to get 3G on my cell phone. So, I've been tethering it to my laptop when needed, but what I'd like to do is set up my Slackware 13.0 box (which is configured to run as firewall/router/dhcp server so that I can just turn on my phone's wireless router program, and then share it out over the whole network in my house. I'm using a Gigabyte b/g wireless card, which has the RT61 chipset in it. I have NO problems at all getting the wireless card to work with just setting up rc.inet1.conf. The only problem here is when I need to take my cell phone with me, I will not be able to simply turn it back into a WAP, and have my Slackware box auto reconnect to it.
This is why I started looking into using WICD. I do NOT run X, so that's why WICD fits the bill, since it has a cli version. First I tried installing the version that came on the CD. No dice there. I removed that package, and tried the 1.7 package that's on the mirrors under current. I used slackpkg to install it. WICD will run, see wlan0, sees my WAP and a few others, but it fails to connect. It attempts to up the interface, and use dhcp to get an ip, but it fails everytime. My phone's WAP program only does WEP, but I can't get WICD to get an IP with our without WEP enabled. I made sure that my rc.inet1.conf file does not reference any interfaces.
View 14 Replies
View Related
Dec 17, 2010
Hi I have istalled a D-Link wireless adaptor - with the help of this forum.
It is up and running - the light flashes and lsusb identifies it correctly, so does iwconfig.
I can, however, not connect to the network, and I noticed the following errors on boot up.
Trigering udev events: /sbin/udevadm trigger -- type: failed /etc/rc.d/rc.M: wlan0 Error for wireless request; "Set Nickname" (8BIC) information; "Any ESSID" Set failed on device wlan0; operation not supported.
Lower down I get
Starting rt2870 drivers . . . /etc/rc.d/rc.inet1: wlan0 information "Any ESSID"
Error for wireless request "Set Nickname" (8BIC) set failed on device wlan0 : Operation not supported
I have on two occassions seen sugstions to use wicd, but how do I use that?
View 14 Replies
View Related
Jun 19, 2010
I had a wireless connection to open suse from last year. I then had a problem with my Netgear 824 router.
I have reconnected to windows vista. Now I have to get opensuse working on wireless. I do not have much experience in opensuse I have read the forums and the sticky and also from wicd forums. I have checked the yast settings and it is for AR242x ath0 and Wired L2 100 eth0.
Details:-
Opensuse version 11 ,2.6.25-1.1 default
Laptop ASus F5RL
Atheros AR242x
I have done the following:-
[Code]...
View 1 Replies
View Related
Jul 23, 2010
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
View 9 Replies
View Related
Jul 1, 2010
I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
View 11 Replies
View Related
Jun 19, 2011
I was playing around with bash scripting and the last thing I remember doing was checking for suid root files. However now I cannot launch sbopkg, tpfand etc and the binaries are nowhere to be seen. I was experimenting with the sticky bit for tpfand so I could load it as a normal user.
Code:
chmod u+s /usr/sbin/tpfand
chmod u-s /usr/sbin/tpfand
However now tpfand is no long in /usr/sbin. But a whereis produces the following results.
Code:
tpfand: /etc/tpfand.conf /etc/tpfand.conf~ /usr/share/tpfand
The same applies for sbopkg, which I have not touched. I think this problem is also related to the wicd error stating it cannot connect to DBus client From these symptoms has anybody experienced anything like this before from tinkering?
View 1 Replies
View Related
Dec 17, 2010
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies
View Related
Jul 3, 2010
Removed Network Manager (Wicd) - Now Can't Connect To Internet
View 1 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Oct 20, 2010
This question may seem to be odd.. but I amnot able to figure out how to setup a wireless network with wicd..
View 3 Replies
View Related
Nov 10, 2010
I have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
View 3 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Aug 3, 2010
using ndiswrapper for a usbwlan device. Configured and modprobe ndiswrapper confirmed working. When I 'iwlist wlan0 scan'I get cell (wifi network) profiles including my own and several of the neighbours - all showing ssid name and whether key managed or not. When I 'wicd-client' this shows my network as hidden. What makes it even stranger is that wicd-client shows all the neighbours network ssid. Check to see if my router is broadcasting ssid and is without a doubt. I have tried to connect to my router via CLI commands (iwconfig) but unable to connect as is wicd-client - will update with log files on this soon.
View 5 Replies
View Related
Jun 23, 2011
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies
View Related
Mar 14, 2011
I'm thrilled using wicd to connect to wireless networks. But when I suspend my laptop using the special keys, I just want to disconnect from wireless without having to use any kind of GUI or curses user interface. It says in the documentation that wicd works by sending DBUS messages, so presumably it's possible to write a command that talks to the daemon directly.But I can't figure out how.Does anybody know by means of what shell command I can tell the wicd daemon to disconnect me from my wireless network?
View 2 Replies
View Related
Sep 23, 2010
The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
View 3 Replies
View Related
Mar 23, 2010
When i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies
View Related
Jul 29, 2010
I am trying to make my computer an access point for a PS3 to connect to directly. I'm not too bothered about it behaving as a router, just a direct connection would be sufficient. I have installed hostapd from slackbuilds.org and followed the guide given at [URL]. Hostapd seems to work ok - it creates a new interface called mon.wlan0 and I can see the access point from my netbook but I can't connect to it. I think the problem is with dhcpd. Here's my /etc/dhcpd.conf:
[Code].....
View 1 Replies
View Related
Dec 8, 2010
I just installed current to my Acer Aspire one 110 netbook that wasrunning 13.1 just fine until this morning. Everything works except the wireless connection. I cannot set the wlan device to go "up", iwlist scan returns "network is down" and ifconfig wlan0 up returns "Operation not possible due to rf-kill".Using the hardware switch makes no difference (it was working before upgrading). I made a clear install. The wlan devices uses the ath5k driver.
Edit: I installed the madwifi driver and nothing changed. After following a "google suggestion" to remove all power from the netbook and try again i can connect using the madwifi driver but not using the ath5k. Still I cannot get the switch to work.
View 10 Replies
View Related
Feb 21, 2010
I've started using slackpkg to keep my system up to date now and after the updates in January my wireless doesn't reconnect after a resume from suspend, I have to connect then kill dhcpcd and restart it. Any ideas what changed there and how I fix it. From the install of 13 until Jan it worked fine.
View 1 Replies
View Related
Feb 25, 2011
I am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
View 8 Replies
View Related
