General :: Printing Command Line History Without Line Numbers?
Aug 22, 2011How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies
ADVERTISEMENT
General :: Command Line - How To View More Of My History In Screen
Jun 28, 2011I was running scripts overnight from the command line (inside Screen on a Linux EC2 instance) and some errors that I was not tracking occurred. I want to "scroll up" or view more of the history in Screen, but I cannot seem to find any commands that will work. I need to see the onscreen output "further up" than I can on my current screen. CTRL + a is supposed to put me into scroll mode inside Screen, but it's not working.
View 4 Replies View RelatedApplications :: Printing Support (line Numbers - Syntax Highlighting - Multiple Columns Per Page - Customizable Fonts And Sizes) Not Available
Jun 17, 2010I've been looking though different editors for one that has good printing support. Ideally it should be able to print C++ code with line numbers, syntax highlighting, multiple columns per page, customizable fonts and sizes and a print preview feature so that I can make sure it looks right before sending it to the printer. It appears that notepad++ had at least some of these features, but it is not available on linux. The best I could do so far is to copy/paste the output of 'cat -n foo.cpp' into oowriter and format it into two colums. I don't get synax highlighting though and I have to manually replace tabs with a few spaces as well as some excessive leading spaces before the line numbering.
View 1 Replies View RelatedGeneral :: Selecting A Font When Printing A Text File From The Command Line?
Jul 29, 2011I don't understand why this is so difficult.In the old days, there was lpforms which allowed some formatting. CUPS did not see fit to implement this into it's lp package.cgi-...-cgi?lpforms+1In the old days, lpr allowed you to select a font in the command line with -1=fontname. CUPS did not see fit to implement this into it's lpr package.htmIn the old days, printers had fonts installed on them that you could access. Modern printers don't seem to have this. So now I still need to be able to select a font when I print certain text files from the command line but it seems this is impossible. I've been working with instances and lpoptions, which allows me to do a lot of other things I need like orientation and margins and even set the font size, but I still cannot choose a font other than the default.
View 2 Replies View RelatedGeneral :: Printing From Command Line Won't Work - Just Sits In Print Queue
Apr 3, 2011CUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
General :: Ubuntu - Package For Specific "command History" On Terminal Line?
Sep 19, 2011Is there a package I can download for Ubuntu that would allow me to type in,for example, cd [tab key] and then it would go through the recent cd commands I've typed in?
View 2 Replies View RelatedUbuntu Networking :: Printing Documents Via The Command Line?
Dec 2, 2010how to send a document to print on a network printer (via IP address) from the command line (not a GUI interface).
View 4 Replies View RelatedSoftware :: Printing To Cups-pdf Via Command Line With Options?
Jun 30, 2011I'm having a hard time trying to print documents to PDF via cups-pdf at the command line and get all of the nice formatting options that the GUI print spooler dialogs provide. I know how to do "lpr -P Generic-CUPS-PDF-Printer filename" to get a general file printed to a PDF, but this method clearly is missing all of the nice formattingptions that get passed when using a GUI print spooler (margins, fonts, dpi, paper size, etc..). I tried to use ps to capture whatever command is being sent by the spooler but couldn't figure it out, since I'm not really sure what commands get called by the spooler
View 8 Replies View RelatedGeneral :: Command Line Way To View A Line Of A File With Context?
Feb 24, 2011I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
General :: Getting Numbers From A Line Of Text?
May 10, 2010 I'm working with a rather large file of data taking from a tracking program on my phone, and trying to pull only the longitude and latitude from it. Any given line in the data looks more or less like this:
{"lon":-122.3083848,"time":1.273515839496E9,"source":"skyhook","nap":28,"altitude":0,"name":"location","hpe" :29,"bearing":0,"ncell":0,"lat":47.6544453}
I've run it through this command:
grep skyhook log-2010-05-10_18-17-28.json | cut -d"," -f1,10
to get this:
{"lon":-122.30872015,"lat":47.65812201}
{"lon":-122.3076686,"lat":47.6569975}
{"lon":-122.3079161,"lat":47.656395}
{"lon":-122.3096168,"lat":47.656218}
{"lon":-122.3096285,"lat":47.656206}
Which is a lot nicer, but I would prefer not to have to hand remove the non-number characters by hand since there are thousands of data points. what I could do to get it to just be longitude and latitude in 'number number' format?
General :: Line Numbers To Html In Mixed Content?
Aug 21, 2010I have huge files, wherein some lines begin with a number. I want to convert that number to a bookmark link
Sample file:
Code:
C.S. Lewis (I think) wrote:
1 If war is ever
2 legal, then peace
3 is sometimes
4 sinful.
Text without numbers toom I need the numbers to be <a name tags where the id is the letter x and the number that is at the beginning of the line:
Code:
C.S. Lewis (I think) wrote:
<a name="x1">1</a> If war is ever
<a name="x2">2</a> legal, then peace
<a name="x3">3</a> is sometimes
<a name="x4">4</a> sinful.
Text without numbers too I'm not sure why I can't get this, but after hours of 3 line long seds and endless while read lines, grepping ^[[:digits:]]s I can't figure it out.
Fedora :: Run Python3 Scripts From Command Line And Call Up Python 2.6.2 Idle With The Command Idle From Command Line?
May 29, 2010i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedSoftware :: Use Command Line To Split A Single-lined XML Into A Multi-line XML?
Dec 9, 2010I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies View RelatedProgramming :: Copy And Replacing Specific Line From File1 To File2 Line By Line
Mar 22, 2011I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
Programming :: Access A File Line By Line, And Check The Length Of Each Line.
Feb 13, 2011I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedProgramming :: Read A File That Counts Each Line And Numbers
May 13, 2010I ran into it while google Segmentation Fault. I'm writing a simple C program that reads a file that counts each line and numbers it then writes to a file called sdout. I copyed my program mostly from the text book but im still having problems. Heres my code:
#include <stdio.h>
#include <stdlib.h>
void new_line(FILE *, FILE *);
int main(char *argv)
[Code]....
Programming :: Compare Two Files Line By Line And Print The Line Which Is Same?
May 30, 2011I am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
Programming :: Insert Line Using Sed Or Awk At Line Using Line Number As Variable
Jul 25, 2011I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
General :: Ubuntu 10.10 And Command Line Scripts - Error - Android: Command Not Found
Mar 26, 2011I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
General :: Access The Dbxml From The Command Line And It Returns Command Not Found?
Apr 30, 2011I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
General :: Create Cron Tab When DSL Line Down Set Automatically Restart The Network Service While DSL Line Up?
Oct 7, 2010How to create cron tab when DSL line down set automatically restart the network service while DSL line up?
View 3 Replies View RelatedGeneral :: Getting The Line Of String From Previous Pipe Output By Line Number?
Feb 8, 2010After running the following command, I get:
[root@yukiko /]# find / -iname .bashrc
/home/clamav/.bashrc
/home/vpopmail/.bashrc
/etc/skel/.bashrc
/root/.bashrc
But I would like to have a command that prints a specific line by supplying the command with the line number, for example:
[root@yukiko /]# find / -iname .bashrc | getline(2)
/home/vpopmail/.bashrc
Is there such a command on CentOS?
General :: Script To Count # Of Chars Per Line - If Line Meets Certain Criteria - And Get Avg #?
Sep 11, 2009I have several files with many lines something like this:
I'm trying to write a script that will count the number of characters per line that doesn't contain a ">" symbol and give me an average of those values. I have most of the script together but I can't figure out how to connect some of the steps.
Code:
General :: Scripting - Feed An Input File Into An If Statement Line-by-line
Dec 23, 2009I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
General :: Parse A File And Print Each Line That Ends With Matching Pattern (if The Next Line Is Blank)
Aug 2, 2010I've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.
Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....
General :: Sort By Line Size (number Of Characters In A Line)?
Jan 8, 2010I want to sort a number of lines based on their size:
data:
-------
12345678
87654321
1234
[code]....
Should output as:
-----------------
1
2
12
21
[code]....
But i'm gettings this with sort
----------------
1
12
123
1234
[code]....
Can we sort the above "data" text, based on "number of characters" instead of "character order"?
General :: Appending To The Current Line In A File Instead Of Creating A New Line?
Apr 1, 2011I am combining data from a couple different input files and creating an output file in a specific format. I notice that if I use the >> operator, information gets appended to a new line in my output file. This is useful, but if I'd like to append onto the CURRENT line, is there an easy way to do this? I've been googling around and see lots of complicated answers, nothing that suggests to me an easy way to do this. For example, if my output file looks like this:
b1a:] cat test
hello my name is
b1a:]
and I'd simply like to append "Bob", how can I do it? If I use
b1a:] echo Bob >> test
b1a:] cat test
b1a:] hello my name is
Bob
b1a:]
So what I would prefer is some command that would create the result:
hello my name is Bob
General :: Match And Combine 2 Text Files Line By Line
Mar 21, 2011This solution works but is slow with large files. I am looking for a faster solution.
The 2 files contain filenames, one of them has associated data I want to append to the other file's matching filenames
file1:
file2:
I append file2 by matching the unique_filenames and appending them with the tag data and some formatting
appended file2:
Here is the SLOW code
while read inputline.
General :: Sed To Display The Pattern String - The Line Above It And The First Line Of That Para
Mar 30, 2011I need to grep for a particular string and if found need to display the line containing that string, the line above that and also the first line of that paragraph.
Can this be done via sed.
Eg, My Paragraphs
OA connectA
Enclosure:
Interconnect Module #6 Status:
Here, if I grep for Critical, it should display the following
Similarly if I grep for Degraded, it should display
Software :: Use Awk For Printing Line From Database?
Jul 22, 2010I have inserted some records in a table having column "value1 varchar2(4000)" and want to spool in a file.I have written as below
/********/
set echo off
set feed off
[code]....