I have a server with RHEL 5. I have bought a HDD and put it into a USB box. Then I plug it to my server by USB cable. I want to mount it but the fdisk -l command don't show external usb device.
View 7 RepliesI know there are entries in FAQ and sticky topics about USB-drives, but I can't really make a use of any of them... I bought a new 1.5TB internal HDD and put it into an external HDD box connected to my PC via USB. The Problem is:
I plug it in, dmesg tells me:
Code: [ 478.884972] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
[ 478.885008] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001002 POWER sig=se0 CSC
[ 478.885078] hub 1-0:1.0: port 6, status 0100, change 0001, 12 Mb/s
[ 478.885095] usb 1-6: USB disconnect, address 2
[Code]....
I created a new disk on our scsi san. I then ran the following command: echo "- - -" > /sys/class/scsi_host/host1/scan. did that command for each host. and in dmesg, it shows it found a device /dev/sdg. but when i do a fdisk -l. It never lists /dev/sdg. I just did this other day on another server and it worked fine like that. This is RH 4.8.
View 7 Replies View RelatedSo my Microsoft Lifecam NX-3000 used to work with 9.04, but I can't seem to get anything from it now (Xubuntu 9.10). It still shows up fine when i enter lsusb, but it won't show up as a video device anywhere else. I have faith that this bug is a simple fix for someone who knows what they're doing, but unfortunately I don't. If it's relevant this is on my aging Toshiba Satellite.
View 4 Replies View RelatedInstalled CentOS 5.5 some time ago and I can proudly say I am more than satisfied with it. Managed to install codecs, flash player, media players, chrome and opera browsers and all other things I need. My only problem is that as of about a week ago my external DVD player is not recognized any more by CentOS so I am unable to watch movies. My external DVD player is Magnavox and it works great but CentOS does not recognize it any more. I used to watch movies in CentOS in SMPlayer all the time. What to do to get it back?
View 1 Replies View Relateda friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
View 8 Replies View Relatedet me know what will be the required settings under /etc/fstab for adding external usb floppy device?
View 3 Replies View RelatedI have an Aspire One with Linux operating system.
I have an external hard drive that I want to save data to from my Aspire One however when I try I get a message that the external hard drive is full.
I know it isn't full and when I use the external hard drive on my other pc with Window 7 it is fine.
I am assuming my problem is something to do with the ACER Aspire One
i want to secure the USB port by any external device connection. so i need the code of detection of an external device when plugged in the USB port.
View 1 Replies View RelatedI initially thought the problem had to do with the Lucid Lynx upgrade, a lot of people have been reporting similar issues with drive mapping and things along those line. My issue is that an external drive, formatted in FAT32 appears to be corrupted, and overtime begins to read or mounts as 'read-only.'
What I've read, and deduced, is that this is ultimately and issue with the drive. I've backed it up, reformatted, and been able to write to the drive successfully, but I've been moving a lot of files (backing up) and the system has been reporting input/output errors in transferring some files (through the GUI).
The only thing I can think of, is that the device itself is corrupted or damaged, and that I need to be thinking of other back-up options for the future. Any suggestions on disk-doctoring? I'm hoping to do a clean-install of the OS once I back up my files manually.
I have a Linux application(ProMAX 5000) running in a virtual Machine on my windows OS. I am using an external Hard drive of 250G in ext2 file system as my device for large data read, write & execute file system. I have already mounted the device from /etc/fstab. But i want my application to access this device as a Primary data storage device OR Secondary storage device. What command will i invoke to partition this 250G drive as my primary or secondary storage device.
View 1 Replies View RelatedThe external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
Is it possible to show only mounted external volumes on the desktop. I try the method of uncheck /app/nautilus/desktop/volumes_visible. But it hides both internal and external disk.
View 6 Replies View RelatedI was wondering if it's possible to show an the AWN dockbar the external devices (such as USB key or external hard disk)connected to the computer. I know that on Docky is possible using an apposite applet
View 6 Replies View RelatedI have been trying to get my 1tb External USB Hard Drive; WD External HD1021; but although I can see it in "Disk Utility" it does not appear on my Desktop as it used to and as it holds many family photographs and almost all of my music collection, some 150gb I am a little concerned. I am using Ubuntu Meerkat on my Toshiba Laptop.
View 9 Replies View RelatedI have a Sansa Clip + ,it works just fine in MSC mode. I wanted to give a try to the MTP mode. But it does not show up in Amarok. I have libmtp installed and mtp-detect does show up the device information.
View 6 Replies View RelatedI try to install 10.04 from CD Rom. At the prepare partitions step, no devices appear.Some details: - I already check the md5sum of the CD.- GParted see it and I'm able to partition it. But always nothing detected with the prepare step.- Intel P4 with 80 GB with 1GB of ram
- No windows already installed on the machine
After cleaning up my son's Vista desktop and backing it up, I installed 11.04 alongside Vista.
Issue #1:
Using the Ubuntu Requirements Guide, which says a minimum of 5GB is needed, I went ahead and allocated 15GB, to be safe and allow for future growth. But when it boots, I get this message:
This Computer has only 244.6 MB of disk space remaining
Ubuntu confirms that the installation took up 13+GB of space. Why is this, and how do I correct it? I would be fine with deleting the partition and starting over, but do not want to damage his Vista installation.
I don't understand why these space requirements aren't explained better or even consistent between different official Ubuntu sources. Here's one for 11.04 that specifies that "You must have at least 44MB of memory and 500MB of hard disk space to perform a normal installation." Now, 'normal installation' implies to me that everything is installed, so I don't get it.
Issue #2:
When I turn on the computer or reboot, I get this floating box:
Monitor Is Working
92.5khz 58hz
Out Of Scan Range
Change PC Setting
This does not disappear until it has booted Ubuntu, so I do not get any menu to choose between Ubuntu and Vista. Why is this and what's the fix?
Issue #3:
When I plug in his USB Wireless device, the device does not light up, there is no popup box in Ubuntu, and the device does not show up in the Wireless Settings box. How do I get Ubuntu to see this device (or any newly plugged in device) so that it can look for the appropriate driver?
I have this unique situation, I think. My TV plays certain files only through external USB storage. My Ubuntu server stores all of these files on local hard disks. I do not want to buy an external hard disk and then keep moving it between both. Now, strange as it may sound, is it possible to somehow connect my server to the PC and expose a given local hard disk connected to the server, as an external USB drive to the TV?
View 1 Replies View RelatedI have got my headset connecting to the system using the BlueMan interface. When I first did this it gave me a error about not being able to put the sound on-top of 'pulseaudio'. Well this well about the last straw between me and Mr. 'PulseAudio', so away he went. I removed the demon via this instruction. [ubuntu] Safely Remove Pulseaudio?
I then tried connecting to my bluetooth headset again, no errors. But the bluetooth sound device does not show up in any mixer, or application. What else do I need to do to get this working again. I know my hardware is fine, it used to work in the previous version of Ubuntu and it all works on my wifes Windoze XP computer.
I have knowledge to make partitions unders windows using fdisk. In Red Hat there is also a fdisk command but how can I use it? In which situations we use linux fdisk ?
View 6 Replies View RelatedI have used fdisk command in windows environment.Just insert a bootable cd having fdisk into cdroom and start hard disk partitioning. I have been working in red hat/fedora Linux since many months.I always use gui interface to do my hard disk partition. Well i am eager to learn Fdisk under Linux. How can I use it ,Its method to create a a fdisk cd or it is in the 1st cd of the operating system ?
View 8 Replies View RelatedWhen I inset my External Hard drive into my laptop it shows 27.3 gb occupied but doesn't show all the files. Also , this is happening only now.
View 10 Replies View RelatedI had tried to install Ubuntu 10.10 on an external harddrive, the Laptop was running Vista. It all worked fine, but now, when the external hd isn't connected, I ge the message: error: no such device : ... grub rescue> the I put the ls command grub rescue> ls (hd0)(hdo,msdos3)(hd0,msdos)(hdmsdos1) Now I just want to get Vista working again, without having to connect the hd.
View 9 Replies View RelatedExternal USB TV device to work on 10.04 I have an External USB TV tuner[URL] Device,That is Compatible with Windows.Is there any way to make it work with UBUNTU 10.04.
View 7 Replies View RelatedI'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
Are there any tools in Ubuntu that could defragment my MP4 player (Sansa E280R)? One of the songs on my MP4 player isn't showing its Album Name or Artist Name. I know I have the artist and album name tagged onto the MP3 because I set them both & double checked using mp3tag.
View 9 Replies View RelatedI am setting up a Linux laptop for my parents, and want to also create some backup scripts to allow them to easily back up to an external hard drive. [And for them to be able to use it, it has to be super simple.]
For security purposes (should the external drive ever get lost or stolen), I want to encrypt the entire device using TrueCrypt. That means my scripts will have to use TrueCrypt to mount the backup volume using the device name. [Right?]
Now to the actual question(s): 1) Is there a way to ensure that an external hard drive will ALWAYS be assigned the same device name when plugged in? [That would be the simplest solution for me.]
2) Alternatively, is there a way (using bash scripting) to "find" the device name of a particular external hard drive, even if it might not be known in advance.
I don't have any sound in my external device (TV). I'm attempting to watch a movie on the VLC player but I can't seem to get the sound to work through my television speakers! They are coming out of my computer speakers just fine though.
View 5 Replies View RelatedIt doesn't show it on the device-notifier, or fdisk, and not sure if this will be any use to you. In windows it appears immediately as a MSD, doesn't show as a modem or anything first.
Code:
linux-gg0e:/home/Chris # tail -f /var/log/messages
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 51 to 50
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Usage Attribute: 195
[Code]....