OpenSUSE Hardware :: Cell Phone Mass Storage Device Doesn't Show Up?
Feb 14, 2010
It doesn't show it on the device-notifier, or fdisk, and not sure if this will be any use to you. In windows it appears immediately as a MSD, doesn't show as a modem or anything first.
Code:
linux-gg0e:/home/Chris # tail -f /var/log/messages
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 51 to 50
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Usage Attribute: 195
[Code]....
View 1 Replies
ADVERTISEMENT
Jul 17, 2010
I need to enable my new E2120 samsung phone as a mass storage device. but I think I need a USB driver. Had a good look round the forums but can't seem to find any posts. Its quite a new phone but hopefully the solution is already about. When I plug it into the USB the phones screen has a hashed out 'mass storage' option.
View 1 Replies
View Related
Nov 22, 2009
I am currently using opensuse 11.2 with kde 4.3.1. I am having a problem when I connect my samsung R450. It will not mount or show up as a usable device in either Dolphin, Amarok, or on the device notifier. I have tried manually mounting but I get an error saying it cannot find such device. I did not have any issues using it in 11.1 with KDE 4.2. It is being recognized by my system, but not allowing it to show up as a storage device or being mounted.
output of dmesg:
PHP Code:
output of lsusb:
PHP Code:
When I shut of the usb mass storage on the samsung R450 it switches to modem and is properly detected and usable as modem by my system.I don't have any other problems with other usb devices, such as a digital camera or flash drives, so I don't know if I just missing a system setting or configuring something wrong.
View 9 Replies
View Related
Feb 23, 2011
I have a problem when trying to mount a memory card in my cell phone. I connect the phone with an USB cable, select mass storage as the phone prompts it, but no luck.
dmesg shows
Code:
[ 200.673190] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 200.823377] usb 3-1: New USB device found, idVendor=05c6, idProduct=1000
[ 200.823386] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code].....
Just to be sure I tried the same thing with FreeBSD, though I knew from past experiences what to expect from it. It just worked(tm) flawlessly, but I'd rather not keep FreeBSD just for the sake of one device I can't seem to get working with Linux. All I can guess it must either be a kernel bug that has persisted for far too long or a faulty udev rule.
View 7 Replies
View Related
May 27, 2011
I would like to download a few (591)images from the Galaxy S phone. Samsung have advised me that to do that I need to place the Galaxy S phone on Mass storage, whivch I can do and plug the phone USB cable to the PC and manually mount the USB. The Galaxy S firmware 2.1-update1 doesn't support automatic mounting! The Galaxy S has an Android platform Kernel version 2.6.29 with root @SE-S604 #2. I'm running Ubuntu 10.04 on a AMD Athlon(tm) XP 1700+ with 1G of ram. It's the manual mounting of the USB connection
View 1 Replies
View Related
Jan 7, 2010
here we have an older digicam (Jenoptik/Exakta Model "DC 22", if someone might want to know) that can be switched between some "PC Camera mode" and "Mass storage mode".Unfortunately, if attached to USB, it is always recognized as
Code:
UDEV [1262910483.475886] add /class/video4linux/video0 (video4linux)
lsusb tells:
[code]...
View 4 Replies
View Related
May 28, 2010
I use fedora12-Gnome as my major desktop OS. Every basic need was fulfilled , until I tried Fedora12 KDE and now Fedora13 KDE. The problem is with Bluetooth connectivity to my cell phone device. It connects to the cell phone and set trusted but I can't seem to see any option of "Browse files on Device". Does that mean in KDE I actually can not browse my Bluetooth connected devices?
View 3 Replies
View Related
Feb 2, 2010
I just discovered that inserting any USB drive causes an immediate hang of the system. The keyboard caps lock and scroll lock lights blink. Only recourse is to power cycle the system. This is after installing Kubuntu 9.10 in January, I don't believe I had occasion to insert a USB drive until tonight. 100% reliable. No entries in logs, presumably because it hangs the kernel when it happens. The /var/log/kern.log file has been corrupted due to file system damage (1+ sectors of some other file inserted into chain) and probably other files as well.
I've not had occasion to report other bugs, but I've found no way to report anything other than application bugs. I tried using "ubuntu-bug kernel" which helpfully said there was no such application as 'kernel' and has been busy "collecting problem information" for the last half hour or more. Somehow I don't think its ever going to finish.
The crash only happens when booted into Kubuntu 9.10. If I boot off of 9.04 then USB drives work fine. Both USB drives I've tried reliably produce the crash. One is a random cheap USB thumb drive (imprinted "Cisco"), the other is a 16GB Corsair Voyager.
View 2 Replies
View Related
Nov 2, 2009
* I am implementing mass storage device on a test board.
* It contains NAND flash.
* Using corresponding "udc driver" and "g_file_storage" I could make my test board enumerate as mass storage device on my Linux machine.
* my 16 MB pen drive (test board) is now ready for read/write.
But there are some Bad Blocks on the NAND.Hence copy is not complete. Although on Linux machine there is no error message. Now , what is there in a normal pen drive which manages the Bad Block or what am I missing so that such Bad Blocks are managed.
Here is the error I get on my test board :
mtdblock: erase of region [0x2c0000, 0x4000] on "Bon 2" failed
end_request: I/O error, dev mtdblock2, sector 5664
Buffer I/O error on device mtdblock2, logical block 708
[code]....
View 3 Replies
View Related
Apr 12, 2016
Since I use openbox with some packages from Xfce4 (mainly for convenience) I get most stuff "for free" as it were when using openbox, but I can't figure out how to mount android devices in a simple way. I can either do it manually, or install some other file manager that has this capability. This leads me to my question, I've noticed that if I install Nautilus, which automatically mounts android devices OotB, I get this functionality in Thunar as well. This leads me to believe that there is clearly a dependency package of some kind installed when running apt-get install nautilus that enables it, It'd be great to get this functionality in Thunar without having all the nautilus packages just littering about for no good reason. the required package is gvfs-backends, which I should have realized when I was unable to browse smb:// addresses. You forget a lot when you only make a fresh install once every 2 years or so.
View 0 Replies
View Related
Jun 3, 2010
I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output:
$ dmesg | grep sd
[20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0
[20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk
Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error:
$ gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed.
The output of gphoto2 is then:
# gphoto2 --list-config
/Camera Configuration/Picture Settings/resolution
/Camera Configuration/Picture Settings/shutter
/Camera Configuration/Picture Settings/aperture
/Camera Configuration/Picture Settings/color
/Camera Configuration/Picture Settings/flash
/Camera Configuration/Picture Settings/whitebalance
/Camera Configuration/Picture Settings/focus-mode
/Camera Configuration/Picture Settings/focus-pos
/Camera Configuration/Picture Settings/exp
/Camera Configuration/Picture Settings/exp-meter
/Camera Configuration/Picture Settings/zoom
/Camera Configuration/Picture Settings/dzoom
/Camera Configuration/Picture Settings/iso
/Camera Configuration/Camera Settings/date-time
/Camera Configuration/Camera Settings/lcd-mode
/Camera Configuration/Camera Settings/lcd-brightness
/Camera Configuration/Camera Settings/lcd-auto-shutoff
/Camera Configuration/Camera Settings/camera-power-save
/Camera Configuration/Camera Settings/host-power-save
/Camera Configuration/Camera Settings/timefmt
Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.
# mount | grep sdg
# mount | grep sg7
# umount /dev/sg7
umount: /dev/sg7: not mounted
# umount /dev/sdg
umount: /dev/sdg: not mounted
# gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
View 4 Replies
View Related
Oct 15, 2010
I have a 1TB external HDD which I use to store my music library of roughly 40 gigs. Therefore I would normally import music directly from it to my Rhythmbox library while keeping everything stored on the removable drive. In recent versions of Rhythmbox this is no longer needed as the application integrates my external HDD into the side pane and lists the music automatically. This is great although when closing Rhythmbox and reopening it, the drive has to be scanned all over again. This is a huge pain when it has to scan through 40+ gigs of music.
Therefore I would like this feature disabled and removed from my side pane. It is not needed and causes quite a large annoyance. Either I want it removed or the ability to keep the index of music from the drive in Rhyrhmbox at all times. Achieving this would be fantastic and would switch me back to Rhythmbox. recently I have been using Exaile which I love but rhythmbox not working bugs me.
View 1 Replies
View Related
Nov 4, 2010
I am beginner in UBUNTO 10.04 LTS. I have a mobile broadband of Relience which use the device of Huawei EC 1262. I have a problem with this modem. when i installed required packages for this device like usbswitch, wvdial etc, my internet connect works fine but as i switch off the PC and restart, PC can not detect the modem, it detect as mass storage device. Is there any command/option that i switch the mass storage device into modem in the terminal window or on the GUI platform mean on the desktop screen.
View 2 Replies
View Related
Oct 26, 2010
I am running 10.04 and don't know how to "add" my Motorola razor cell phone so I can download my pictures to my p.c.
View 1 Replies
View Related
May 29, 2011
I have a Samsung SGH-D900 with its USB cable, and tried to connect to my Netbook - Ubuntu 10.04 to download photos, but the Netbook doesn't recognize the Cell Phone. Is there a Linux Driver for Samsung SGH-D900?
View 3 Replies
View Related
May 11, 2010
i just tried using my Nokia 2700 classic's internet on my Lynx.it got connected to the network when i ticked the option access internet via the phone in bluetooth setup.But i am unable to surf the net...I am still connected to my college's wifi network which uses a http proxy.I tried using no proxy in mozilla when i was connected to both the networks;but then also nothhing was working;whereas my cell showed the sign of GPRS..
View 3 Replies
View Related
Nov 12, 2010
im looking for an app that basically can notify me by popup message when i get a call while my phone is connected via usb cable.
i have a normal Motorolla flip phone with ATT service.
i see alot of apps listed but none of the descriptions for them seem to offer what i want.
im using Ubuntu 10.4
View 2 Replies
View Related
Jul 19, 2011
So is there anything out there that will edit the HD 3gp files from my cell phone? Or the HD files from my Nikon camera?
View 5 Replies
View Related
Jul 26, 2010
I am trying to connect my cell phone through a Bluetooth dongle in Ubuntu 8.10 but when I try setting up a new device my cell phone is not seen. I tried reading some guides, I installed everything needed but still it doesn't work, some files are even missing (probably because they guides are for older versions of Ubuntu but i can't find a new guide on it) like.
I tried the following commands:
jessica@jessica-desktop:~$ sudo hcitool scanScanning ...
00:16:75:15:14:81 Hill Billy
jessica@jessica-desktop:~$ sudo hidd --connect 00:16:75:15:14:81
Can't get device information: Success
jessica@jessica-desktop:~$
I guess they work but how come my device is still not seen in the Bluetooth applet? How can I send files? Why can't I connect to the computer using my phone? I don't want to depend on windows for this too.
View 4 Replies
View Related
Oct 28, 2010
if anyone knows of a way to be able to console in to a cell phone? I'm guessing it may be different from one cell phone to the next, but I want to console into my phone, and ftp, or tftp a copy of the OS onto my computer, and try to maybe use gedit or nano to look at the code, and play around with it. I'd like to see where the e911 code is, and create some kind of script that would alert me whenever that gps feature that is available to the cellular providers and the government.
since Americans are required to have a cell phone that is GPS capable, I would like to know if that ever gets activated. Additionally, I would also like to write scripts that would alert me if my microphone is activated.Maybe this is only possible on Droid phones since they are Unix based? Either way, you can readily buy usb cables to connect your phone to your pc to transfer pics, videos, etc. Maybe there is a way to run nmap on that cable connection to find a way to hack in?
View 1 Replies
View Related
Aug 10, 2010
I want connect to Internet via my phone ( Motorola A1200 ) I can connect currectly in micro$oft windowns 7 but I can not connect in my linux via wvdial.
View 9 Replies
View Related
Dec 31, 2010
My phone is dead or dying so now is a good time to look for a FOSS replacement for Nokia PC Suite and Outlook -- the only reason I run Windows.
Is there any solution (or combination of solutions) that supports synchronising personal information manager (PIM) data -- most importantly names and phone numbers, calendar/schedule and notes -- with any model of cell phone?
EDIT:
SyncEvolution looks promising and there are reports of it working at least adequately with several phones including the interesting for Linux people Nokia N900 but OS-wise it only claims compatibility with ubuntus and debian 4.0, not beloved Slackware; maybe that's more because of what people have tried than because it doesn't work. As the name suggests it works only with Evolution, perhaps not the first choice of email client and PIM.
View 4 Replies
View Related
Jul 13, 2010
I'm using my phone with TrekBuddy to contribute to Open Street Map and find it a bit awkward to bluetooth or removing the memory card from the phone to use USB directly. So I've been struggling some time to solve this issue, without any luck.Contents from my TrekBuddy directory on the memorycard on phone:Quote:
> ls -l
totalt 382
-rw-------. 1 dag dag 195409 2010-07-11 13:28 20100711-123727.gpx
[code]....
View 2 Replies
View Related
Mar 17, 2010
What I currently do is run this script -
Code:
rfcomm release 0
CHANNEL = `sdptool search --bdaddr=00:21:FE:A5:C9:4A dun | grep Channel | cut -c14`
rfcomm bind 0 00:21:FE:A5:C9:4A ${CHANNEL}
wvdial e71bt
And my /etc/wvdial.conf is configured for AT&T connection here in the US.
Question is, is there anyway I can integrate it with NetworkManager, instead of having to run this script?
There's a "Broadband" option on NetworkManager, but I am not able to get it to recognize my cell phone as a modem. The bluetooth applet only allows for file transfer
View 3 Replies
View Related
Sep 17, 2010
Most cellphones can play music. How does one sync Ubuntu One w. the music player in the cellphone. Alternatively how to download music from Ubuntu One to a cellphone? Access to the web/internet is assumed in this case.
View 2 Replies
View Related
Nov 6, 2010
I have a large collection of cell phone videos comprised of ".mov" and ".avi" file formats and I would like to stitch them all together to form a single video. I will then export them to a DVD format but the main goal for now is to get them stitched together.My tools are:(1) Kino(2) Cinelerra(3) AvidemuxMy skills are:(1) Pretty good(2) Not so good(3) None existentDoes anyone have some good suggestions on how to accomplish this?
View 1 Replies
View Related
Oct 9, 2010
This is the first time I have used any forum. Please forgive me if I fail to do this the right way.
My question is... can I download pictures from my Samsung cell phone to my pc under Ubuntu since Samsung doesn't support drivers for their phone any longer
View 8 Replies
View Related
Dec 28, 2010
i have three type of linux distributions installed on vmware- centos 5.5 , rhel5, fedora14.i have installed centos 5.5 on a seprate hard disk.i want to use internet on linux using my nokia 2630 cell phone.how to connect my phone through bluetooth to use internet?
View 13 Replies
View Related
Nov 21, 2010
Is there an application or script file that I can use to send a message to my cel phone every day at the same time with cron? I have medications I need to take and sometime do not realize I've missed the timing until 4-5 hours later.
View 5 Replies
View Related
May 20, 2011
When I connect a USB stick to my laptop, it is mounted as root:root. I want ot be able to use it as the logged in user
It has worked in the past (1+ month ago), but recently it just mount it as root:root.
My userid is 1000, so somewhere in the system it knows that the current user is relevant.
The directory created
The date is off System time is correct - so this could be an indication of what is wrong.
I have tried with my own custom compiled kernel and now I am using the latest 2.6.38 official image.
View 10 Replies
View Related
