I have been reading [URL] to setup the same. But I am facing an issue here. Whenever I am editing the file:
Code:
Alias /webdav /var/www/webdav
Dav on
in wedav.conf under /etc/httpd/conf.d folder.
It says:
Code:
[root@chat conf.d]# service httpd restart
Stopping httpd: [FAILED]
[code]...
When creating sub-domains, and creating log files for each domain, do I need to ensure that apache owns the log files, so that it can write to it? As I notice they are owned by root, obviously whom I used to make the file...
View 2 Replies View RelatedI want to setup a SSL encrypted WebDAV share on my OpenSUSE 11.4 server that is accessible from the internet. Everything is working fine when using Windows XP or Linux clients, but a connection with Windows 7 is not possible ("the selected folder is not valid").
I already searched for a solution to this problem I tried several setups:
- with and without encryption
- with Basic authentication
- with Digest authentication
- without authentication
I did not have success so far. Is there any solution to this (except not using Windows 7)? Or can anyone confirm that this should be working (and maybe my configuration is messed up)?
i am using ubuntu 10.10. I had installed apache2 and subversion, using webdav, as described in the unbuntu wiki. SVN was working as expected, I could commit files, etc. I then installed php5 and mysql, as described in the ubuntu wiki, and i now get the following on apache restart:
apache2: Syntax error on line 203 of /etc/apache2/apache2.conf: Syntax error on line 2 of /etc/apache2/mods-enabled/dav_svn.load: Cannot load /usr/lib/apache2/modules/mod_dav_svn.so into server: /usr/lib/libgssapi_krb5.so.2: symbol krb5_authdata_context_copy, version krb5_3_MIT not defined in file libkrb5.so.3 with link time reference Action 'configtest' failed.
I have one previously compiled apache server from source. I would like to know is there any option to get previous configuration file from /etc/httpd/.
View 9 Replies View RelatedI configure my apache and can run http://localhost. There "I see it works!" but if I try to stop apache I get message that httpd is not started. I run
apachectl start - ok
but when I run apachectl stop it says "httpd (no pid file) not running"
I need to stop apache, because this is my dev machine and I want to start apache only when I make changes to my site. I am with slackware13.
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies View RelatedI m using apache http server for hosting a website.
Whenever i start httpd service 8 apache processes get triggered . Is it normal? Is apache is default application server like IIS in windows?
Quote:
top - 15:49:15 up 8 days, 22:53, 3 users, load average: 0.73, 0.77, 0.91
Tasks: 125 total, 1 running, 124 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.8% us, 8.0% sy, 0.0% ni, 91.2% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2064720k total, 2017072k used, 47648k free, 204452k buffers
[Code]....
I have a WebDAV folder (complete folder hierarchy in fact) currently managed by SAP's KM module. Long story short: it's in Windows, it's slow, I hate it.
I want to migrate the hole tree to my brand new Ubuntu Server 10.04 with a functional WebDAV server I just finished configuring. It connects to LDAP for user authentication, it's fast, it works like a charm.
Do you guys know any way I can transfer/migrate files from the Windows WebDAV to to Ubuntu WebDAV? The only thing that is important to keep is file security properties. Both WebDAVs have the same user database: our corporate Active Directory.
I've installed webdav on my server and I can access it fine through cadaver. However, when I try to access it via nautilus, I get Forbidden. It is NOT secured (SSL). When I try to access it via firefox, I get an error since I DO NOT have "Options Indexes" in my apache config file. If I add this option in, then I can browse the root direction and webdav folder via firefox, but still not from nautilus. what other information you need. I've googled and searched the forums for awhile, but not "solutions" I found have worked for me. I want the webdav folder to just be a single folder within the direction, so this is how I have my config file setup:
[Code]....
As a side-note...when I included "Option Indexes", it allowed me to view the passwd.dav file from firefox!That doesn't seem very good...
will the command service httpd restart the apache service if i enable httpsd service in graphical mode
View 12 Replies View RelatedWe have apache installed at a directory other than the default location. There are two httpd.conf files on the server, one at the apache installation directory, and the other one is the default one at /etc/httpd/conf. The apache ran very well with the customized httpd.conf before, but after I installed php 5, the server seems taking the default httpd.conf and doesn't display the html pages which are installed at our apache directory. How to let the server know not to use the default httpd.conf and use the customized one instead?
View 3 Replies View RelatedI installed apache from a source *.tar.gz with default configuration. Can I enable other modules (like mod_ssl, mod_dav_svn,...) while apache is running?
View 6 Replies View RelatedI just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
View 4 Replies View RelatedWhen I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies View RelatedI have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"
I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
View 6 Replies View RelatedI am trying to setup Fedira 12 Linux Apache in my home network. I am able to access the hosted website from inside my home network without any problem. I am facing the problem to access it from outside. At the moment i have connected the Apache directly to DSL modem for testing purpose. I was reading "The ISP may have blocked the HTTP port 80. So check it by connecting the Apache directly to DSL modem." The temporary network connections for testing purpose are as follows..
DSL modem (SIEMENS Speed Stream 4200)-->Fedora 12/Linux Apache Server
I am even unable to PING the real ip (IP for DSL modem).(Firefox gave me error message "Connection Timed out) I have tried to ping it from the internet.I can PING the DSL from Apache without any problem.
1. Why i am even unable to PING the real IP of DSL modem at my home.?
2. Is it possible to run/setup Apache by using this type of DSL modem?
3. DSL modem has real IP. DSL MODEM assigns private IP (192.168.x.x) to Apache. So when a http request form the internet came to DSL modem on port 80, will it forward to Apache automatically.? or i have to made any changes.(I can not see anything in DSL modem to change/modify), OR do I have to use another DSL MODEM/Equipment (router)? This setup is just temporary. The actual design is as follows
DSL MODEM(Speed Stream 4200)-->Fedora 12 Linux ROUTER--->Internal network with DNS/Apache Server
I'm having a problem with mod_suexec in Fedora 15.I have suexec set up in Apache, snippits from httpd.conf:
Code:
LoadModule suexec_module modules/mod_suexec.so
...
[code]....
I have both apache and tomcat services running, both in their standard doors (tomcat 8080, httpd 80). I need to setup tomcat to run on door 80 instead of httpd. I changed httpd door with success to 8180. Now I want to change tomcat6 door to 80, and I did that by editing server.xml config file of tomcat. After restarting tomcat, the system tells me it's ok, but I can see that it's not running on 80, nor at any other door. A simple nmap search confirm that. What should I do to have tomcat running in door 80?
View 5 Replies View RelatedI am unable to examine Apache httpd error log from YaST2 because the lines are too long; the browser just truncates them and thus it does not show any description. The only option is to save it. However, when I chose that option, YaST2 encourages me to save it in /tmp, and as soon as I do that, the log becomes accessible to every user!
View 5 Replies View RelatedI have written this script to monitor Apache2:
Code:
#!/bin/bash
#count lines that show apache2 but not the fgrep itself
let i=`ps aux | fgrep apache2 | fgrep -v grep | wc -l`
if [ "$i" -gt 0 ]
then
#log something
[Code]...
It has all been working fine until recently when Apache is becoming unresponsive. I manually ran ps to check and there were 3 processes. However when I ran apache2ctl graceful I got the message 'httpd not running, trying to start' Is there a better way to check if a daemon is up?
my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies View RelatedI am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
I've been trying to figure out how to set up my Apache 2 running on Ubuntu 9.10 to provide a reverse proxy so I can see my wifi network camera monitoring my dogs and still have access to my family website. First, I followed the suggestions from this thread on Ubuntu forums: [URL]. I set up a similar rule set at the end of my /etc/apache2/sites-available/default, restarted apache -- from which I got a response saying that Apache2 could not determine the server name -- and then tried logging into my server through its ip address. When I tried http://192.168.2.80/dogCam, I just got a 404 error. Here's what I added: (I also tried my domain name, but it also didn't work.)
Code:
<VirtualHost 192.168.2.80:80>
ProxyPass /dogCam/ http://192.168.2.160/
ProxyPassReverse /dogCam/ http://192.168.2.160/
</VirtualHost>
When I looked at many other threads, I get recommendations to have my setup in httpd.conf. But, in both this server and a freshly installed Ubuntu laptop, my httpd.conf file is empty! I tried copying and pasting the recommended contents of the following thread, with the example proxy paths replaced with the ones I needed: [URL]. Straight-forward tutorials don't seem to apply, as Ubuntu has a blank httpd.conf file. I figured out that Ubuntu seems to load its modules by simply adding soft-links to the modules of interest from modules-enabled to modules-available. But, after a full day of trying to figure out what looks to be fairly simple and well-documented, I am at a loss for setting up this reverse proxy or even figuring out where to set ServerName to define my domain name to Apache2 in Ubuntu.
whats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View RelatedI've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.
I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View RelatedI just 'yum installed' php and php-pgsql.I appear to have weak search-foo and cannot figure out how to enable php in apache ( the nifty php-info page does not appear, just the hello and world I put into the file before and after the php-info call ). My intent is to be able to use phpPgAdmin. So I will also need to enable the php-pgsql shared object. I need to add to httpd.conf and any other initialization that I need to do?
View 2 Replies View Related
