Server :: Can't Get On Internet / Apache Is Running / Httpd Is Not
Feb 11, 2011
When I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
Code: #!/bin/bash #count lines that show apache2 but not the fgrep itself let i=`ps aux | fgrep apache2 | fgrep -v grep | wc -l` if [ "$i" -gt 0 ] then #log something
[Code]...
It has all been working fine until recently when Apache is becoming unresponsive. I manually ran ps to check and there were 3 processes. However when I ran apache2ctl graceful I got the message 'httpd not running, trying to start' Is there a better way to check if a daemon is up?
Running CentOS 5 x64 And today my httpd is running very slow and I can't find a fix. Looked all over different forums
When starting httpd I get the message: /var/lock/subsys/httpd': No space left on device I checked that directory above and there is no file called httpd tried rebooting server
Can't do updates too: [root@u15438957 ~]# yum update Loaded plugins: fastestmirror, priorities rpmdb: unable to join the environment
I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
I am trying to setup Fedira 12 Linux Apache in my home network. I am able to access the hosted website from inside my home network without any problem. I am facing the problem to access it from outside. At the moment i have connected the Apache directly to DSL modem for testing purpose. I was reading "The ISP may have blocked the HTTP port 80. So check it by connecting the Apache directly to DSL modem." The temporary network connections for testing purpose are as follows..
DSL modem (SIEMENS Speed Stream 4200)-->Fedora 12/Linux Apache Server
I am even unable to PING the real ip (IP for DSL modem).(Firefox gave me error message "Connection Timed out) I have tried to ping it from the internet.I can PING the DSL from Apache without any problem.
1. Why i am even unable to PING the real IP of DSL modem at my home.?
2. Is it possible to run/setup Apache by using this type of DSL modem?
3. DSL modem has real IP. DSL MODEM assigns private IP (192.168.x.x) to Apache. So when a http request form the internet came to DSL modem on port 80, will it forward to Apache automatically.? or i have to made any changes.(I can not see anything in DSL modem to change/modify), OR do I have to use another DSL MODEM/Equipment (router)? This setup is just temporary. The actual design is as follows
DSL MODEM(Speed Stream 4200)-->Fedora 12 Linux ROUTER--->Internal network with DNS/Apache Server
my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
I am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.
I have downloaded and installed a mini-httpd on my Debian 2.6.32 and its running on port 80.I have some webpages that I have stored in the /usr/share/mini-httpd/html directory.I am able to access those webpages from my machine(i.e.localhost).But I am unable to access it from another machine within the network.I have tried editing the iptables rules but in vain.The problem is,in my company we use a proxy server to browse the net and when I try to access the webpage on my machine from another system(by giving myipaddress/webpage.html),it shows the error message that proxy server is refusing any connections to the server.
installed a new centOS 5 server, and after the installation, everything seem to work well but for httpd not running. when i try to issue the restart command i get the following error:
[root@appdev ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: httpd: Syntax error on line 206 of /etc/httpd/conf/httpd.conf: Cannot load
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
I have a single CentOS server with two separate NIC's. I was asked to install an internal Wiki on Apache but have that dedicated to one NIC so it's internal only. Then have just a site running on Apache on the 2nd NIC which is externally accessible. I have never done anything like this and would like tonow how difficult this would be on a single stand alone server that I have above?
I just did a fresh install of ubuntu 9.10 and install apache2 webserver with php5 and mysql, but for some reason I have no idea why but when upload files to the computer running apache2 webserver
http://69.242.228.170/ is the link to the ubuntu system It's not displaying the website correctly and it's not working on any pc on my network either, but it looks fine in dreamweaver when I was designing it on my laptop. list of all the files and folders in the /var/www path
We have apache installed at a directory other than the default location. There are two httpd.conf files on the server, one at the apache installation directory, and the other one is the default one at /etc/httpd/conf. The apache ran very well with the customized httpd.conf before, but after I installed php 5, the server seems taking the default httpd.conf and doesn't display the html pages which are installed at our apache directory. How to let the server know not to use the default httpd.conf and use the customized one instead?
When creating sub-domains, and creating log files for each domain, do I need to ensure that apache owns the log files, so that it can write to it? As I notice they are owned by root, obviously whom I used to make the file...
i have apache and mysql running, i can access my web server by visiting localhost on port 80 but for some reason when it doesnt work when i try using my ISP provided IP address... (it used to work).. i have my router setup with a DMZ on my LAN IP (my computers IP, this is the computer in my home network that serving with apache).. i also cant seem to shut down my mysql server (theres an update ive been trying to get) even when i use sudo...
I'm trying to modify an existing user so that any files they create can be at least read (although writing and execution would be nice) by any other user. The reason is because I need the daemon running my Apache server to be able to access files created by a daemon running under this user, files which will be created and accessed in real-time.
I set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
I am running Apache 2.2.3 on a CentOS release 5.3 (Final) with 100 Sites. I've notice that Apache is making my server Swap around 200 MBs. "http://www.xxx.yyy.zzz/server-status" doesn't show me too much to, so I am looking the behavior of specific httpd process. ProcessID "18753" is the one for "http://www.xxx.yyy.zzz/server-status" in my browser.
This command show me (In KBs) how much virtual memory is that specific process using: # /etc/init.d/httpd start # grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }' 3012 ... Running this command a lot of times it gives me the same output, but suddenly... # grep Private_Dirty /proc/18753/smaps | awk '{ print $2 }' | xargs ruby -e 'puts ARGV.inject { |i, j| i.to_i + j.to_i }' 21708
Something make that process (and all the others httpd process too) to use a lot more memory!
Part of my httpd.conf: # Timeout 120 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 3
My server is running Mysql 5.1.34, vsftpd 2.0.5, BIND 9.3.4-P1 (as slave). I couldn't found anything running in the specific time that httpd processes start to use that much memory.
I trashed my Karmic Ubuntu install and installed Lucid (I had heard that the boot times were much reduced and I didn't see any improvement in my normal upgrade). I reinstalled Drupal but find that my installation of Apache does not run the scripts, but rather passes the php text file to the browser. IIRC when I installed it apt configured Apache correctly without me having to edit .htaccess or /etc/apache2/httpd.conf which makes me think that I am missing a key dependency.
Does anyone know of a check list to which I can refer to make sure that I've installed everything? My installation has Postgres instead of MySQL. Failing which, in the event that my memory is faulty, where can I find which changes need to be applied to the configuration files above?
OS: Ubuntu Server x64 10.04 Apache: 2.2.14-5ubuntu8.4 I have a virtual server which has been running for months with no problems then one day I saw that it crashed and I had to power cycle it. Since then I have been unable to start Apache as it segfaults no matter options I give it. Before I try to reinstall Apache, why is this segfaulting?
Code: execve("/usr/sbin/apache2", ["/usr/sbin/apache2"], [/* 21 vars */]) = 0 brk(0) = 0x7f9f48f8d000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9f47e0d000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
I am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
I am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
