Fedora Servers :: Apache Configuration And HTTPD Services

May 29, 2010

I have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??

View 6 Replies


ADVERTISEMENT

OpenSUSE Network :: Apache And Tomcat Services - HTTPD Door

Jun 16, 2010

I have both apache and tomcat services running, both in their standard doors (tomcat 8080, httpd 80). I need to setup tomcat to run on door 80 instead of httpd. I changed httpd door with success to 8180. Now I want to change tomcat6 door to 80, and I did that by editing server.xml config file of tomcat. After restarting tomcat, the system tells me it's ok, but I can see that it's not running on 80, nor at any other door. A simple nmap search confirm that. What should I do to have tomcat running in door 80?

View 5 Replies View Related

Fedora Servers :: Run Tomcat Behind Apache Httpd?

Dec 19, 2009

I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice

View 4 Replies View Related

Fedora Servers :: Apache Httpd Doesn't Start On 11

Sep 3, 2009

I have just installed Fedora 11 on a "fresh machine" and everything works ok, except for Apache httpd
the message seen in the error_log is the following: Name or service not known: mod_unique_id: unable to find IPv4 address of "myserver"

View 14 Replies View Related

Fedora Servers :: Suexec Set Up In Apache, Snippits From Httpd.conf?

Jun 25, 2011

I'm having a problem with mod_suexec in Fedora 15.I have suexec set up in Apache, snippits from httpd.conf:

Code:
LoadModule suexec_module modules/mod_suexec.so
...

[code]....

View 3 Replies View Related

Server :: Verify Configuration For Services (httpd, Sendmail ,ldap ,DHCP, DNS, SQUID)?

Aug 22, 2009

How can I verify the following service configuration files/setup are ok with?(in RedHat)
httpd
sendmail
ldap
DHCP
DNS
SQUID

For example, I can use "testparm" to verify the my samba configuration . I want a similar kind of testing option for the above mentioned options.

View 5 Replies View Related

General :: Possible To Get Previous Apache Configuration File From HTTPD

Feb 18, 2011

I have one previously compiled apache server from source. I would like to know is there any option to get previous configuration file from /etc/httpd/.

View 9 Replies View Related

Fedora Installation :: HTTPD Services Dead - Cannot Resurrect

Feb 1, 2009

Since I started using Fedora 10 I can't login as root. Even though the system recognizes the root password when it requires it for certain administrative tasks it refuses to let me login as root.

When I try to edit httpd.conf I get the message "could not save file..." it doesn't even prompt me for the root password. My httpd service is dead and I can't resurrect it, what should I do?

View 2 Replies View Related

Ubuntu Servers :: Apache Processes Listed But Httpd Not Running?

Dec 5, 2010

I have written this script to monitor Apache2:

Code:
#!/bin/bash
#count lines that show apache2 but not the fgrep itself
let i=`ps aux | fgrep apache2 | fgrep -v grep | wc -l`
if [ "$i" -gt 0 ]
then
#log something

[Code]...

It has all been working fine until recently when Apache is becoming unresponsive. I manually ran ps to check and there were 3 processes. However when I ran apache2ctl graceful I got the message 'httpd not running, trying to start' Is there a better way to check if a daemon is up?

View 4 Replies View Related

Red Hat / Fedora :: How To Let Apache Know Which Httpd.conf To Be Used

Jan 19, 2009

We have apache installed at a directory other than the default location. There are two httpd.conf files on the server, one at the apache installation directory, and the other one is the default one at /etc/httpd/conf. The apache ran very well with the customized httpd.conf before, but after I installed php 5, the server seems taking the default httpd.conf and doesn't display the html pages which are installed at our apache directory. How to let the server know not to use the default httpd.conf and use the customized one instead?

View 3 Replies View Related

Fedora Networking :: Config The Httpd Apache Server To Upload Files

Jan 6, 2011

my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.

View 3 Replies View Related

CentOS 5 :: Httpd Services Dead But Subsys Locked

Nov 12, 2010

I have centos 5.5 64bit installed. When I start the httpd service I get the above message. The message is bogus because the server is running and web pages work. Is there a fix out there to resolve this?

View 4 Replies View Related

CentOS 5 :: Httpd: Could Not Open Configuration File /etc/httpd/conf/httpd.conf: No Such File

Nov 9, 2009

accidentally I do something wrong with my server and the httpd folder missing and I need it to setup my mail server and anyone can help me what can I do without reinstalling my Cent OS? Here is the error msg :

[root@mydomain etc]# service httpd stop
Stopping httpd: [FAILED]
[root@mydomain etc]# service httpd restart

[code]....

View 3 Replies View Related

CentOS 5 Server :: LDAP Client - Nss_ldap: - Authenticate SSH And Sudo And Not Services Like Httpd - Nrpe - Xinetd

Aug 9, 2011

When ever I have an issue with our LDAP server (which I was able to fix) we see the following errors in /var/log/messages and it causes problems with our services running on that box, e.g. httpd, nrpe, xinetd, etc. Aug 8 17:44:42 hostname httpd: nss_ldap: failed to bind to LDAP server ldap://serveraddress/: Can't contact LDAP server Aug 8 17:44:42 hostname httpd: nss_ldap: reconnecting to LDAP server (sleeping 64 seconds)... I am only wanting to authenticate SSH and Sudo and not services like httpd, nrpe, xinetd etc.

View 2 Replies View Related

Ubuntu Servers :: Apache SSL Configuration Troubleshooting?

Jul 19, 2010

I am trying to configure Apache on my server to work with ssl, but everytime I visit my site, I get the following message in my browser: SSL connection error. Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have.

Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. Just some background on the situation: I am using Ubuntu 10.04 desktop edition. I installed apache by installing zend server (it installed apache automatically). I then installed openssl. Non-https pages work fine on the site. I tried getting trial certificates from multiple certificate sites but nothing is working (same error). I was previously hosting my site on another server on which ssl worked just fine. I also tried using the key and crt file from that server, but I got the same error. The domain name and IP are still the same though. My SSLCertificateFile and SSLCertificateKeyFile are pointing to the correct directory and files.

View 3 Replies View Related

Fedora Servers :: Can't Get Httpd To Index

Feb 28, 2009

I am tyring to setup my webserver on Fedora 10 to do the following.

first, i want to require logins when people access my machine. This i have working through the .htaccess file.

Second, i want directories that do not have an index.html file to be auto indexed. This is where its not working for me. I get a 403.

the only change from the default setting in the httpd.conf file is AllowOverride AuthConfig

it would seem that the default settings for are

<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny

[Code].....

IF i put an index.html file in sub/ i no longer get a 403, i just get that file.

View 6 Replies View Related

Fedora Servers :: HTTPD - How To Setup GUI

Apr 27, 2010

I have Fedora 12 x86_64 installed in my computer. I have also installed system-config-httpd, but when I go to System --> Administration --> Server Settings --> HTTP, nothing shows up.

View 4 Replies View Related

Ubuntu Servers :: Apache Configuration - Designing Webpages In PHP

Feb 4, 2010

I'm using ubuntu 9.04, I want to design webpages in PHP for that I installed apache 2 on my machine. I'm using my mobile to connect to the internet when ever the mobile is connected and the wired connection established the server running properly. But when the wired connection disconnected my browser page didn't show the localhost home. How can I configure the apache on my machine.

View 3 Replies View Related

Ubuntu Servers :: Basic Configuration To Execute PHP Under Apache

Apr 7, 2011

On Ubuntu 10.04 with Apache and PHP installed, I can execute a test.php file

Code:

If I specify it on my Apache web server

Code:

However, I am not able to configure the web site to execute index.php automatically.

These are the settings I have.

Code:

View 2 Replies View Related

Fedora Servers :: Httpd And Apache2 Conflict?

Jul 4, 2009

httpd have been install by default and I don't start it as services. I have install apache2 but don't want to start as service, I can't add it into the chkconfig. When I try to remove httpd, fedora also want to remove these software.

gnome-user-share i586 2.26.0-2.fc11 installed 809 k
httpd-manual i586 2.2.11-8 installed 3.5 M
mod_perl i586 2.0.4-8 installed 6.3 M

[code]....

php and webalizer I don't care as I want to install the new version, but is their any problem removing the other one? Also I want to pount the apache2 documentroot to var/www/httpd but when I do this and try to see the website I got a 403 error (not autorize)

View 1 Replies View Related

Fedora Servers :: HTTPD Does Not Start On Boot

Jun 24, 2010

On this system httpd does not start on boot. I can manually start it without errors with service httpd start.

Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off

Where do I look to see why it wont start?

View 9 Replies View Related

General :: Terminal Command / Centos Server Starts Mysqld, Httpd And Ftpd Services At Boot Time Automatically?

Dec 27, 2010

Can anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?

View 2 Replies View Related

Fedora Servers :: Why Some Application Has Services Some Not

Apr 24, 2009

Why some application has daemon and some others doesn't. I thought just network application has services like httpd, nfs, cups.... but I just found out that cron, gpm.. and other has it to. why other some other applications hasn't got daemon. Just want to know what sort of application has services.

View 2 Replies View Related

Ubuntu Servers :: Cgi Doesn't Work With New Apache Site Configuration?

Mar 24, 2010

I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:

Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost

[code]....

View 4 Replies View Related

Fedora Servers :: HTTPD Dual Nic Using Eth1 Instead Of Eth0

Mar 2, 2009

I've just setup Fedora 10 x64 on a Supermicro 7045 with dual nic; I setup a web site and ran into a strange problem; I can't see my website from outside my LAN; checking IP on Internet it sees my IP as coming for my dynamic IP (IP of router/switch) and not my static IP.

eth0: Static IP
eth1: Dynamic IP

These are standard Intel 82563EB Dual-Port Gigabit Ethernet Controller.

Is there a way to specify the order in which it sees the nic ports?

I'm wonder if I can mix Static and Dynamic IP's; on the outside they resolve to a static IP; the dynamic one shows up as my router/switch IP; but it allows me to access my DHCP computers; this isn't a web server; but a development machine for writing PHP apps.

Where 123.123.123.3 is my static IP address.

I should mention that nmap -v -p 80 123.123.123.3 shows an open port on 80

My VirtualHost is setup like:

View 11 Replies View Related

Fedora Servers :: Httpd Starts But Doesnt Work ?

Mar 18, 2009

I want to run a web server.

I've done

When i do [url] i get a blank page.

View 14 Replies View Related

Fedora Servers :: Service Httpd Restart - Broken In F11?

Jul 5, 2009

Has anyone noticed that when using NameVirtualHost's in apache that the service httpd restart command is broken?Also it seems system-config-bind has glitches too.

View 10 Replies View Related

Fedora Servers :: Add Pages To /var/www/httpd And Permissions Denied

Oct 28, 2009

I installed apache and all is well until I had to add pages to /var/www/httpd and permissions are dinied.

View 1 Replies View Related

Fedora Servers :: Secure - Httpd Tomcat Mysql

Dec 19, 2009

I just installed FC12 x86_64. After a clean install I found that httpd, mysql, svn, svnadmin, etc are already installed. I still need to install and configure tomcat running as a worker behind httpd and configure everything. But my question is about security. What do I need to do to ensure that when I start httpd and mysql that they are secure? Are there default settings that I need to change? Are there security patches I need to apply?

System Config:
Fedora Core 12 x86_64
AMD Athlon II X2 250 3.0 GHz dual core
GIGABYTE GA-MA785GM-US2H
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model F2-8500CL5D-4GBPK

View 8 Replies View Related

Fedora Servers :: HTTPD Fails To Start On Boot

Aug 24, 2010

I'm completely stumped by a problem with httpd in Fedora 13. It fails to start on boot: I can see: Starting htpd: FAILED, in /var/log/boot.log, but I can't find anything else in messages, audit.log or anywhere else that gives me any clue why. The weird thing is that running:
run_init service httpd start
after boot _works_ and the server runs fine, but even when it's running OK,
service httpd status
reports
httpd dead but subsys locked

I'm guessing that the problem somehow relates to selinux, but I can't find anything in the audit logs that gives me a clue. How to turn on more logging so that I can get closer to the problem. I finally discovered the cause. This system was originally configured to use network services directly, without NetworkManager. It had been upgraded a number of times since installation. It seems that over time, if you have turned off NetworkManager, the defaults have changed. Used to be that the network services was 'enabled' by default (hence started at run time). Now, the default is 'disabled'. Httpd couldn't start because there was no network to start on. Enabling network services at boot time fixed this. I guess I should have noticed this. But one might think that httpd failing to start because of the lack of a network might at least give a warning message in the logs about the reason.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved