I have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 RepliesI'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.
And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)
For those that want similar functionality here's my discovery...
My configuration is like this:
ssl.conf:
Code:
I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.
It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
View 4 Replies View RelatedCan anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
View 1 Replies View RelatedI have both apache and tomcat services running, both in their standard doors (tomcat 8080, httpd 80). I need to setup tomcat to run on door 80 instead of httpd. I changed httpd door with success to 8180. Now I want to change tomcat6 door to 80, and I did that by editing server.xml config file of tomcat. After restarting tomcat, the system tells me it's ok, but I can see that it's not running on 80, nor at any other door. A simple nmap search confirm that. What should I do to have tomcat running in door 80?
View 5 Replies View RelatedI have used same Hardware and OS platfrom for web server benchmarking and i have used similar php and jsp scripts for Apache and Tomcat. For this testing i have used apache ab benchmarking toolFrom this statistics i would like to clarify the performances about Apache and Tomcat.
1. why Tomcat have taken too much of time to finish this 10 million requests to compare with Apache?
2. why this huge different for "Request per Second"?
3. To Tomcat i have increased multi thread level 300 and JVM memory usage upto 2048mb(but performances not increased), rather than these, is there any other performance tune-up settings for Tomcat?
4. from these statistics, can i come to the conclusion that apache is the best?
5.do u feel that ab tool favouring to Apache?
I'm configuring a web server using Apache and Tomcat. I use Apache 2 and various instances of Tomcat5 and Tomcat6..I try that Apache serves the static data and tomcat the dynamic (Apache receives all requests, sending tomcat only the dynamic)I see that Apache and Tomcat can be connected using http or ajp Can any tell me:
- What connector should I use: ajp, http,...?
- How can I say Apache to serve the static data and Tomcat the dynamic?Due to I have many instances of Tomcat, connectins http and https, https with client certificates, and due to the port configuration:
- Is there any way to configure Apache-tomcat without the use of ports in tomcat (a differect connector)?
I need to install apache tomcat on centos 5.3...How can i do it
View 4 Replies View Relatedwe have configured snv in our server but when we tried to access our svn folder from client its saying path not found error.This is because apache is mapped to tomcat so when we tried to access svn by default it looks to some other path and displaying path not found error.My question is how to restrict apache from forwarding its request to tomcat or else how to stop the tomcat service. I am using centos and i tried with /etc/init.d/tomcat5 stop but it is not getting stopped.
View 3 Replies View Relateddoes anybody have a nice tutorial about creating and installing Apache client certificate (PKCS12) ? I`m looking for some tutorials to CentOS. This what I have found on the internet for some reasons doesnt work. Or maybe somebody could write here how to do it?
View 1 Replies View RelatedIf any one knows about Apache-Tomcat installation.
View 5 Replies View RelatedI have FC13 with apache up and running. I need to run tomcat to do some dynamic web with eclipse, I checked my setup and noticed that I already have tomcat5 in add/remove software as installed bu can not find any etc/tomcat and not able to find how to test. I went through the FC13 documentaion, nothing is mentioned abou apache tomcat setup finalizing and testing that ships with FC13 it works. I googled and found some docs around setup tomcat6 or tomcat 5 but not how finalize the one shipped with FC13.
View 2 Replies View RelatedI have installed apache tomcat 5.5.27 in centos5. I edited the server.xml file also. The startup.sh and shutdown.sh commands are working fine. But tomcat is not opening in the browser. Can you suggest me something or tell me the steps involved in installing tomcat. Is admin.tar.gz of apache tomcat required for its working?
View 1 Replies View RelatedI installed very old the rhel package Apache Tomcat/5.5.20. I want to update it 5.5.33 or Tomcat6. Do you have the update for redhat?
View 1 Replies View RelatedRight now I have Apache and Tomcat running on the same server. For reasons I won't go into I'm experimenting with putting Apache on a separate server, and installing Tomcat on multiple back-end servers. This isn't a load-balancing scenario as each Tomcat container on the back-end servers will be providing a separate application/responding to a different url. In a typical setup (everything on one box) the configuration file (we use workers.properties)sets what appears to be parameters such as the location of tomcat and Java. For example, here is the current output of workers.properties:Quote:
workers.tomcat_home=/usr/share/tomcat6/
workers.java_home=/usr/lib/jvm/default-java
ps=/
[code]...
I've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View RelatedI am having a problem.I use Ubuntu 10.04 server edition.Two computers on LAN one with Public Ip A other with local (Class C IP)say it BWith a third computer in same subnet I can access a TomCat application running on B as http://Ip of B:8080/applicationI want to use A as a Reverse Proxy for this application to be reachable from internet.So on Googling I came across some thing known as mod_ajp I enabled that on my Server A asa2enmod proxya2enmod proxy_ajpa2enmod headersbut after that I am not able to understand as how do I define vhost to be able to forward HTTP request which come on A as www.myserver.com/appto B which I can see internally as http://Ip of B:8080/application so Tomcat on B handles this.
View 4 Replies View RelatedWhen I do " ps aux | grep apache " I can see that apache2 is running. But when I do the same thing for http or httpd there is nothing. I looked for this question in the forums but couldn't find it. I probably don't know just what to look for.I'm using the new Debian Squeeze, and was fooling around heavily with new software installations and modifications, and just noticed all of a sudden that I couldn't get on the internet - so I know I did something but don't know what.I can plug in a thumb drive with a bitnami joomla stack on it and run, " ~/tmp/joomla-1.6.0-0/./ctlscript.sh start "and that gets things going for the joomla stuff (apache, http, mysql, php), but that stuff is pretty self contained and does not effect the browser's attempt to reach the web.
View 12 Replies View RelatedFedora 14. I have Apache HTTP Server installed and running fine. I am interested in doing some java servlet pages. Am I correct that in addition to the above I need to install another server - for example Tomcat - that knows how to process java servlets? I see that yum has tomcat. And that Tomcat is not an add on to the HTTP Server, but an alternative to it? i.e I start one or the other?
View 2 Replies View RelatedI am trying to setup Fedira 12 Linux Apache in my home network. I am able to access the hosted website from inside my home network without any problem. I am facing the problem to access it from outside. At the moment i have connected the Apache directly to DSL modem for testing purpose. I was reading "The ISP may have blocked the HTTP port 80. So check it by connecting the Apache directly to DSL modem." The temporary network connections for testing purpose are as follows..
DSL modem (SIEMENS Speed Stream 4200)-->Fedora 12/Linux Apache Server
I am even unable to PING the real ip (IP for DSL modem).(Firefox gave me error message "Connection Timed out) I have tried to ping it from the internet.I can PING the DSL from Apache without any problem.
1. Why i am even unable to PING the real IP of DSL modem at my home.?
2. Is it possible to run/setup Apache by using this type of DSL modem?
3. DSL modem has real IP. DSL MODEM assigns private IP (192.168.x.x) to Apache. So when a http request form the internet came to DSL modem on port 80, will it forward to Apache automatically.? or i have to made any changes.(I can not see anything in DSL modem to change/modify), OR do I have to use another DSL MODEM/Equipment (router)? This setup is just temporary. The actual design is as follows
DSL MODEM(Speed Stream 4200)-->Fedora 12 Linux ROUTER--->Internal network with DNS/Apache Server
what is the role of /etc/sysconfig/httpd configuration file in apache server .
View 2 Replies View Relatedmy task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies View RelatedI am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.
I have a single CentOS server with two separate NIC's. I was asked to install an internal Wiki on Apache but have that dedicated to one NIC so it's internal only. Then have just a site running on Apache on the 2nd NIC which is externally accessible. I have never done anything like this and would like tonow how difficult this would be on a single stand alone server that I have above?
View 1 Replies View RelatedI have apache server running on Fedora 11. I want to test Self-signed certificate for SSL setup with Apache.HOw can I setup?
View 1 Replies View RelatedI am trying to run two web servers (Virtual Hosts) on a single Linux Centos 5.5 box with a single IP address 192.168.0.182. I did all the pre-installation requirements such yum install mysql, yum install mysqladmin, service httpd start, service mysqld start etc etc.In /var/www/html directory, I have two folder called server1 and server2. These two folders have the necessary web server php script files and folders. I opened the browser and managed to install the script on one web server successfully. When I put the IP address 192.168.0.182 on the browser address bar, the page loads without any problem. Now I would like to be able to install the other web server script and I don't know how to?Here is my httpd configuration;
<VirtualHost *>
DocumentRoot /var/www/html/server1
ServerName development.mysite.com
[code]....
I'm trying to install an Ubuntu cloud on my home network - I've been following this guide. When I arrived at STEP 6: Install an image from the store PART 3: Click on the Store tab I get the following error message on the page: Error 60: server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none
View 1 Replies View Related