Can not get Ubuntu 11.04 to recognize my Dell 1390 Mini Card WLAN. IT works fine with a Ethernet connection but does not find my WLAN. Can someone please offer so much desired help? I have a Inspiron 1521 with an AMD 64X Processor.
View 4 RepliesI have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE.
This one contains a Broadcom 4312 WLAN card
Code:
lspci -vnn|grep Broadcom
07:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
0b:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1615]
Subsystem: Broadcom Corporation Device [14e4:1615]
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
I'm having problems with wifi on my Dell Inspiron 1501. According to the specifications, it has a "Dell Wireless 1390 WLAN MiniCard". I could not activate the device. I have installed openSUSE 11.4 with GNOME.
View 2 Replies View RelatedMy Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI installed ubuntu 10.10 and everything worked fine for two days (and I fell in love with linux) but now I can not connect to a wireless connection. Did I mention I am new to linux and have been working on this problem for a couple of days. My wireless card is 1395 WLAN Mini-Card I think I have the b43 driver installed. I have reinstalled the driver and linux but to no effect.
View 14 Replies View RelatedInspiron 1525 - Wireless 1395 WLAN Mini-Card I passed two days browsing the net looking for a solution to my problem but no way.. Im running ubuntu 10.10 in my inspiron via VirtualBox and my wireless card is not detected by ubuntu.. I installed the bcmwl6.inf driver with the wrapper and it show me in wireless window that the hardware is not present.. So checked that in the terminal by typing :
Code:
lshw -C network
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
[Code].
I have a Dell Inspiron 1525 laptop using Dell Wireless 1395 WLAN Mini-card (This is what Windows Vista says I have). I have installed Ubuntu as dual boot with existing Windows Vista. Wireless is not working in Ubuntu but working flawlessly in Windows.
Here is the output using CODE: lspci.
hai@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
hai@ubuntu:~$
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
Where can i find driver for Dell Wireless 1397 802.11b/g Half Mini Card. I'm using CentOS x86_64.
View 9 Replies View Relatedi want to install ubuntu in my dell..ive already installed one in my desktop can i use that installer to my dell mini inspiron 10?? i have a usb hard drive..or better to use usb stick? well what about blackbuntu? seems awesome can i install that in my dell?
View 5 Replies View RelatedHow to fix window lay out of GIMP in Dell Inspiron mini. Because every time I open GIMP the layout change and difficult to work ?I found GIMP -2.6.8 version how can I install this version to my computer. Since, I have some problems when using gimp-2.4.5.
View 2 Replies View RelatedI have been using UBUNTU 8.04 with my Dell Mini Inspiron. How can I upgrade it ? If I upgrade is there problem after upgrade ?
View 5 Replies View RelatedI am stuck in 800x576 resolution and don't know how to escape. I've tried changing xorg.conf but that caused my machine to grind to a halt and I had to copy the original .conf file back over before I could launch GNOME again. I've run lspci | grep VGA, and this is what I get:
00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) When I run xrandr --verbose, I get:
Screen 0: minimum 800 x 576, current 800 x 576, maximum 800 x 576
default connected 800x576+0+0 (0x10 normal (normal) 0mm x 0mm
Identifier: 0x107
Timestamp: 30685
[Code]...
I'm trying to install Photran for Eclipse 3.6. I've managed to get 3.6 and it works but the next step involves choosing a package that I just can't see because my screen resolution is too small.
I can't get WLAN up on my Dell Mini 10v (BCM 4312)/openSUSE 11.3/LXDE. And yes, I have thoroughly read iwfingers's 'Getting your Wireless to Work'. After installing openSUSE 11.3 ifconfig can see eth0, l0 and wlan0. No WLAN running. dsmesq|grep firmware prompts me to '/usr/sbin/install_bcm43xx_firmware"
After having done that and reboot ifconfig can only see eth0 and l0. Installing broadcom-wl-5.60.48.36-7.pm.16.4.i586.rpm broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm (current ones from Packman) does, Shall I try to install the drivers without installing the firmware first?
Why does broadcom-wl-kmp-default-5.60.48.36_k2.6.34.0_12-7.pm.16.4.i586.rpm install a new default kernel? Ubuntu Netbook Remix 9.04 had no problems with WLAN.
I recently installed Ubuntu Netbook Remix on my Dell Inspiron Mini 10, and for some reason it isn't detecting any wireless networks. The wireless works perfectly fine when I boot to Windows XP on the netbook, but not when I'm using Ubuntu. I tried troubleshooting using this htmlAt the "check for device recognition" step, the terminal tells me that it's disabled, but as far as I can tell there isn't a physical switch that allows me to turn the wireless on or off, and again, it works perfectly fine when I use XP. What should I do?
View 9 Replies View RelatedI have ubuntu 10.04 netbook edition on my usb. But, when I go to install it, by restarting and then clicking F12 (is F12 the right one?) and the menu comes up. So i select boot with removable disk, but then it just resumes to boot as windows as it normally does. I need to get this menu right so I can install Ubuntu...My computer is a Dell inspiron mini 10 (1012).
View 3 Replies View RelatedThis card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
I have had to install the B43 diver before to get wireless to work.
View 5 Replies View RelatedI am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code:
linux-gkpt:~ # lspci -v
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
[Code]...
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
View 3 Replies View Relatedhow to install wireless driver on inspiron 1012 mini on ubuntu server 10.10 32bit. Not shore what is the wireless card name. I have no internet acsess whit that pc but can copy files whit usb from another pc.
View 9 Replies View RelatedI finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...
The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.
What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
View 1 Replies View RelatedI have recently bought a Dell Inspiron N5010 Laptop....and I am facing a lot of problems as most of the hardware seems to have no driver installed.... I am a not an expert, so the problems seem overwhelming to me. I have looked around for solutions on the Internet...but there seems to be no collective solution to my problem. The information regarding the problems I can provide is as follows.....
[Code].....
I tried to find my solution for hours now but no luck. I'm a medical student and the other day I finally found the time to set up ubuntu for my first time. Everything was working great and I had wireless up and running. However, I tried to set up tethering to my iphone and after that my wireless hasn't been working (I've noticed no other problems). [URL]..Then I used this tutorial [URL].. However, after doing these steps the computer needed to reboot (I actually forget exactly where but I had to reboot in the middle of the second tutorial). After my computer restarted my wireless no longer showed up. By this I mean that wireless network no longer even showed up as an option when I left clicked then connections. However, I did not lose the wireless profile under network connections. So I went to system and noticed that the Broadcom STA driver was no longer active. So I tried to activate again and received this message.
[Code]...
Since the install and original tweaking of F15 the os and pc have been operating flawlessly now for a couple months. Today I slid the Sandisk memory card from my camera in but there is no detection of the stick and no paths in the media link directory. I searched the forum but did not find any post specific to this issue.
View 1 Replies View RelatedI have a Dell WLAN 1397 Half Minicard, 802.11 b/g card in my laptop, and I can't seem to get ubuntu to work with it. I tried this method:
1. Synaptic Pack Manager
2. Check "Install from Boot Disc"
3. Reload
4. Install and apply bcmwl-kernel-source
5. Reboot
This didn't work for me, so I tried entering sudo apt-get install bcmwl-kernel-source and that also didn't work. Another thing I tried is formatting my Ubuntu partition and reinstalling, and retrying both of those methods. The ethernet port does work, however.