General :: Ubuntu 10.04 - Wireless Card Not Working On Dell Inspiron 2200
Oct 9, 2010
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
View 2 Replies
ADVERTISEMENT
Mar 9, 2011
I need an .inf and I don't have the software that came with the pc for the wireless driver. I already installed ndiswrapper.
What can I do next does someone have the .inf file I need ?
View 1 Replies
View Related
Jan 20, 2010
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
View 3 Replies
View Related
Mar 16, 2009
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
View 14 Replies
View Related
May 14, 2011
I had just installed Ubuntu in my brother's laptop and the drivers for the laptop`s wireless card got deleted, or that's what is leading me to believe. Prior to the installation, the laptop was picking up wireless signals just fine. I tried finding the drivers on the INTERNET but there are too many and I don't want to get the wrong one. Even so, I don't know how to install it through Ubuntu or anything. I tried the "disswrapping" app. but it was looking for some sort of ".if" file type. I also tried using the Terminal, but I'm not an expert on this kind of stuff. I got Ubuntu 2 days ago on my own laptop.
View 1 Replies
View Related
Jan 15, 2010
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
View 2 Replies
View Related
Jan 7, 2010
The network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies
View Related
Feb 22, 2010
I'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies
View Related
Jun 6, 2010
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies
View Related
Jan 22, 2011
I have spent all day trying to wireless network to work on my Dell Inspiron 1440, but no luck.
I followed the guide here: [URL]
Here are the details of my network card:
root@bruparel-Inspiron-1440:/home/bruparel# lspci -n | grep 14e4
0c:00.0 0280: 14e4:4315 (rev 01)
Here are the more verbose details:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
[Code]....
Things seem to install fine, but the wireless network remains unavailable (wireless network is disabled).
If someone can walk me through the trouble-shooting process, I tried the solution suggested in the sticky at the top too but no luck.
View 1 Replies
View Related
Jul 27, 2011
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
View 9 Replies
View Related
Apr 22, 2011
I installed openSUSE 11.4 in my laptop as dual boot.But wireless drivers are not working.Please give a suggestion to work wifi.
View 3 Replies
View Related
Mar 17, 2011
I have Backtrack4r2, and it did not detect my wireless card which is Intelpro 2200. I installed Windows wireless driver, after i installed the regular driver using wine, but it did not work.
module is not detected by linux No wireless extension. how can I install rhe driver where the card is not detected.
View 2 Replies
View Related
Sep 19, 2015
I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.
I have installed the b43 firmware and after that everything seemed working but just for a few seconds.
I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.
I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.
I can easily use my wifi with my smartphone too.
View 1 Replies
View Related
May 29, 2011
Can not get Ubuntu 11.04 to recognize my Dell 1390 Mini Card WLAN. IT works fine with a Ethernet connection but does not find my WLAN. Can someone please offer so much desired help? I have a Inspiron 1521 with an AMD 64X Processor.
View 4 Replies
View Related
May 31, 2011
I recently upgraded from Ubuntu 10.4 to 11.4 on my Dell Inspiron laptop, and now my wireless is completely disabled, and I do not have an ethernet cord I can use. (I do not have internet access at home, I rely on public wifi.)
View 13 Replies
View Related
Dec 27, 2010
I'm on a Dell Inspiron 1525 running Arch Linux with an Intel 965 GM video chipset (from dmesg). I'm using the xf86-video-intel driver, and Xorg (using xfce4) works flawlessly, including compositing. Before getting into details about the HDMI, I'd like to ask why I don't gave an xorg.conf.d/10-moniter.conf, it's not there, just evdev, quirks, and synaptics (because I figured that moniter.conf could be modified to include HDMI). So, basically when I'm on my XFCE4 desktop, I plug in the HDMI cable and to the TV, and on windows, it would would work, but on Arch the TV just says: "No input", and my desktop just stays the same, so absolutely nothing happens. If I have it connected upon bootup, the HDMI displays (the BIOS and grub menu on the TV) until I select to boot Arch linux on Grub, then the tv screen goes blank. I've tried Googling this but I got no decent results, just a bunch of random posts of audio not working with Nvidia.
PS - I did dmesg and lspci (with grep HDMI) and no results, so maybe it doesn't even recognize it, but then what do I do? There's obviously Linux support for HDMI...
View 13 Replies
View Related
Jul 4, 2010
I have had to install the B43 diver before to get wireless to work.
View 5 Replies
View Related
Jan 28, 2010
i can use internet in my Laptop. My laptop is only connected with wireless. No cable connection avilable here. Wireless is functioning well in windows 7 but in openSuSe 11.2 it is not functioning. I've searched on this issue in net and found that i've to install Packman repository or install driver from broadcom website. Please help me by giving easy way to do so. Following is the detail of my wireless device and some other information.
Code:
linux-gkpt:~ # lspci -v
0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
Subsystem: Dell Wireless 1390 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
[Code]...
View 3 Replies
View Related
Jul 4, 2010
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies
View Related
Apr 28, 2011
Wireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies
View Related
Apr 25, 2010
I have installed Fedora12 on Dell Inspiron laptop. Here are my key details of my laptop.
<Fn + F4 > ---- For decreasing Brightness
<Fn + F5 > ---- For increasing Brightness
<Fn + F2 > ---- To enable Bluetooth
I am able to enable bluetooth by pressing <Fn + F2>, But I am not able to increase OR decrease brightness of my laptop screen.I have attached keymap of my laptop by the output of
Code:
xmodmap -pke
Please find the attachment keymap.txt.
View 5 Replies
View Related
Jun 1, 2009
[URL]
Quote:toracat wrote:Quote:Reason for custom build is the need to disable ieee80211 and ipw2200 pre-built module in kernel. Trying to get wireless working, and I want to use the later versions of these modules in the hope to get wireless working.
View 4 Replies
View Related
Oct 14, 2010
I finally got around to trying Ubuntu 10.04 on a "decommissioned" Dell Inspiron 8100 1.2Ghz P3 512MB RAM 40GB HD... and Ubuntu is absolutely AMAZING compared to Windows! I'm a Mac guy and honestly Ubuntu gives 90% of the Mac OS GUI and 0% of the "brain damage" of WinBLOWS...
The only thing missing in this laptop is WiFi which I want to do via one of the PCMCIA slots since the mini-PCI is a combo 10/100 network + v.90 modem card... and I need to keep the Ethernet port and fax modem capabilities.
What are the best "Plug n Play" PCMCIA WiFi cards for our "G" and "N" WPA2 ONLY Airport Express WiFi network? I'm new to Linux so I'd really like to avoid editing and replacing system files and drivers if possible to get a PCMCIA card working. I'd also like a card that works in WinXP Pro SP3 since this laptop is dual boot capable.
View 1 Replies
View Related
Mar 9, 2010
I have a Dell Inspiron 1545 running Windows 7 64-bit. It has a Dell 1397 Wireless card with Broadcom BCM 4312 hardware. This is proven by running lspci in Terminal. I downloaded Ubuntu 9.10 64-bit and burned a disc of it. I used System>Administration>USB Startup Disc Creator to make a Live USB from a 4GB flash drive. I plugged it in and my computer booted into Ubuntu with no trouble. The only problem is that I can't connect to my wireless network. The problem is that no matter how I install the Broadcom STA driver, it just says that the driver is activated but not actively in use. I've used Synaptic Package Manager, Jockey, and even Terminal. I've tried running
Code: sudo modprobe wl
in Terminal, but nothing seems to happen. In Ubuntu, my computer acts as though it has no wireless card, but the wired connection is fine (except for the inconvenience of connecting with a cable). In Windows 7, the wireless connection is fine.
View 6 Replies
View Related
Mar 18, 2011
I have a 10 year old Dell Latitude CPx that has no ethernet or modem ports, and the only way to connect to the internet is the Dynex Wireless G DX-BNBC PCMCIA card. It came with Windows 98, and I put Xubuntu on it for a while. I believe it was Xubuntu 8 or 9. Back then I had no clue what to do whatsoever, so after a couple weeks removed it and put Windows 2000 on it. It worked, I used it for a while, but it was slow and 2000 took up a lot of space on the 12gb hard drive after all the updates. I left it forgotten and gathering dust for the past year.
Then a few days ago I discovered Lubuntu 10.10, and from what I've seen so far it is definitely a lot more compact and faster than 2000. However, the wireless card still won't work. It's somewhat recognized, because whenever I unplug it and plug it in a bubble pops up saying "you've been disconnected from the network"... which is odd, since it never says I'm connected, and says that the firmware is missing for this card. Anyway, I discovered something this time. By running "lspci -nn | grep -i 14e4":
[Code]....
View 1 Replies
View Related
Jan 24, 2010
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
[Code]...
View 6 Replies
View Related
Dec 13, 2010
I just completed installing openSuse 11.1 I followed the detailed steps given in Getting Your Wireless to Work When I try to scan for available APs in the vicinity, I get the following error.
~> sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Can someone guide me in configuring my wireless connection. Also, since I do not happen to have a wired connection, I am alternating between openSuse and windows everytime i need internet.
View 2 Replies
View Related
Feb 18, 2011
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
View 6 Replies
View Related
Aug 13, 2011
Since the install and original tweaking of F15 the os and pc have been operating flawlessly now for a couple months. Today I slid the Sandisk memory card from my camera in but there is no detection of the stick and no paths in the media link directory. I searched the forum but did not find any post specific to this issue.
View 1 Replies
View Related
