Ubuntu Multimedia :: Screen Resolution For Dell Inspiron Mini?
May 15, 2011
I am stuck in 800x576 resolution and don't know how to escape. I've tried changing xorg.conf but that caused my machine to grind to a halt and I had to copy the original .conf file back over before I could launch GNOME again. I've run lspci | grep VGA, and this is what I get:
00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) When I run xrandr --verbose, I get:
Screen 0: minimum 800 x 576, current 800 x 576, maximum 800 x 576
default connected 800x576+0+0 (0x10 normal (normal) 0mm x 0mm
Identifier: 0x107
Timestamp: 30685
[Code]...
I'm trying to install Photran for Eclipse 3.6. I've managed to get 3.6 and it works but the next step involves choosing a package that I just can't see because my screen resolution is too small.
View 2 Replies
ADVERTISEMENT
Feb 5, 2011
i want to install ubuntu in my dell..ive already installed one in my desktop can i use that installer to my dell mini inspiron 10?? i have a usb hard drive..or better to use usb stick? well what about blackbuntu? seems awesome can i install that in my dell?
View 5 Replies
View Related
Apr 4, 2010
How to fix window lay out of GIMP in Dell Inspiron mini. Because every time I open GIMP the layout change and difficult to work ?I found GIMP -2.6.8 version how can I install this version to my computer. Since, I have some problems when using gimp-2.4.5.
View 2 Replies
View Related
Sep 2, 2010
I have been using UBUNTU 8.04 with my Dell Mini Inspiron. How can I upgrade it ? If I upgrade is there problem after upgrade ?
View 5 Replies
View Related
Jul 6, 2010
I recently installed Ubuntu Netbook Remix on my Dell Inspiron Mini 10, and for some reason it isn't detecting any wireless networks. The wireless works perfectly fine when I boot to Windows XP on the netbook, but not when I'm using Ubuntu. I tried troubleshooting using this htmlAt the "check for device recognition" step, the terminal tells me that it's disabled, but as far as I can tell there isn't a physical switch that allows me to turn the wireless on or off, and again, it works perfectly fine when I use XP. What should I do?
View 9 Replies
View Related
Sep 26, 2010
I just want to report that I managed to get WLAN running on my Dell Mini 10 (Inspiron 1012) with OpenSuse 11.3 KDE.
This one contains a Broadcom 4312 WLAN card
Code:
lspci -vnn|grep Broadcom
07:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
0b:00.0 Multimedia controller [0480]: Broadcom Corporation Device [14e4:1615]
Subsystem: Broadcom Corporation Device [14e4:1615]
I just installed the broadcom-wl and broadcom-wl-kmp-desktop packages from the packman repository. Then there is a new entry in the bootmanager menu. Using that one, WLAN works fine.By the way: Can somebody explain me the difference between the broadcom-wl-kmp-desktop, broadcom-wl-kmp-default, broadcom-wl-kmp-pae, broadcom-wl-kmp-xen packages? I did not find any documentation about that.
View 3 Replies
View Related
May 1, 2010
I have ubuntu 10.04 netbook edition on my usb. But, when I go to install it, by restarting and then clicking F12 (is F12 the right one?) and the menu comes up. So i select boot with removable disk, but then it just resumes to boot as windows as it normally does. I need to get this menu right so I can install Ubuntu...My computer is a Dell inspiron mini 10 (1012).
View 3 Replies
View Related
Oct 5, 2010
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
View 5 Replies
View Related
May 29, 2011
Can not get Ubuntu 11.04 to recognize my Dell 1390 Mini Card WLAN. IT works fine with a Ethernet connection but does not find my WLAN. Can someone please offer so much desired help? I have a Inspiron 1521 with an AMD 64X Processor.
View 4 Replies
View Related
Sep 16, 2010
I am running Lenny of a Dell Mini 10, using only the console. I want to get the resolution smaller that 80 on the horizontal axis, but I can't find the right setting for vga in /boot/grub/menu.lst.
Inserting various values makes the dell give me list of possible video modes at boot, but none of these are higher than 80xSomething. It offers VESA modes that are choosing these results in unreadably tiny text, and anyway I wouldn't know how to edit in order to make these mode take effect automatically.
Can anyone tell give me a value that works for vga on Dell Mini 10 that produces a smaller resolution that 80xSomething? If not, can someone suggests a different way to obtain the same result?
View 9 Replies
View Related
Nov 7, 2010
I am using HP Mini 1000 Series with Ubuntu 10.10 (later installed with xubuntu-desktop). I want to run a wine application which requires 800x600 resolution. However, my current resolution is 1024x576. The other available solution is 640x480. Previously, I used pre-installed Windows XP, it allows me to change the resolution to 800x600 by clicking the "List All Modes" button at the display setting, then I can choose the 800x600 resolution. So, I think HP Mini is also able to support 800x600 screen resolution. May I know how can I do it in Ubuntu?
View 1 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
Mar 22, 2010
I can't activate my 5.1 surround. The sound preferences only show the 4.0 option. When I tried using the
Code:
speaker-test -Dplug:surround51 -c6 -l1 -twav.I can only hear the front and rear speakers. Am currently using 10.04. This problem bugged be since 9.04.
Here's my hardware btw:
Code:
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
code....
Tried testing the latest beta... but it still isn't working
View 2 Replies
View Related
Jun 18, 2010
Can't play midi files on my Dell Inspiron 1300. Do I need another application?
View 4 Replies
View Related
Oct 17, 2010
Just got a Dell Inspiron N5030. Internal speaker works. I can make a skype test service with internal speaker device. When I plugged the head phone, the head phone does not work. No problem with the head phone indeed. I have searched the forum for N5030 key word. But never able to find one.
I am using Ubuntu 10.04 LTS
- the Lucid Lynx - released in April 2010 and supported until April 2013.
View 8 Replies
View Related
Jan 8, 2011
The only problem I've had so far seems to be a common one but I haven't found a specific solution for a dell inspiron 700m. I have sound through the headphones but not through the laptop internal speakers. I've played with the alsamixer settings endlessly but no success, and I'm 99% sure that it's not an issue with the hardware or speaker wiring. I suspect I need to add an 'options snd-hda-intel model=xxxxx' line to alsa-base but not sure what argument to use.
[Code]...
View 9 Replies
View Related
Feb 12, 2011
I've just installed brand new Debian 6 on an oldish Dell Inspiron 5160 laptop. This features an XGI Volari XP5 video card, which I can see reported in /var/log/Xorg.0.log.
When Debian boots it will only run in command line mode. Running startx hangs up the whole system and just displays a black screen with a few vertical stripes in different colours of dark green.
the default vesa driver for X.org doesn't play very well with the XGI video card.
I've tried running
X -configure
then
X -config /root/xorg.conf.new
This correctly detects the XGI Volari XP5 card (if you look through the xorg.conf) but running the second X command still hangs up the system.
X runs fine under Knoppix, but most recent Ubuntu distros I've tried actually hung up after the initial text-based startup section, so presumably died as soon as X started up. Debian's graphical installer worked fine, however.
View 1 Replies
View Related
Mar 19, 2010
I just installed Debian (lenny) on my HP 2133 Mini-Note (KX869AT). I've managed to get everything working, even the Broadcom wireless adapter, but the display is too large for the actual screen size. To get the screen to a more manageable resolution, I did copy the xorg.conf file of another HP 2133 Mini-Note user. (It was probably a different model; there are several versions of the HP 2133, hence the model number in the description.) Icons and things hide off-screen. The text on the GNOME panel is quite large.
View 5 Replies
View Related
Mar 22, 2010
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
View 1 Replies
View Related
Sep 1, 2011
I am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log:
p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert.
14:38:48.377 Statistik zurckgesetzt.
[code]....
View 1 Replies
View Related
Aug 6, 2011
I have a Dell mini 10 netbook that I am trying to set up as a temporary HTPC. Using XP, I can send the video and audio over the HDMI connection, but when I attempt to do so from Ubuntu, there is not an option for a different monitor.
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Aug 14, 2015
I have a Dell Inspiron 1525 laptop and I ve installed Jessie with KDE desktop.Everything's fine !!!!! but sometimes when I use webbrowsers the systray with KDE menustart is going off and missing.After that I can't switch window to window and can't minimize or resize the actual activity, without or with hotkeys either can't close the window, and these option bars ar missing too.I always do restart but I ve had enough. It is very irritating.Also I have tried to switch user logons with Alt Ctrl Fxx and start another graphic array with startx and it has worked fine but that's not the right way I think!!!!
View 11 Replies
View Related
Jan 2, 2011
I've installed Debian using the boot.img.gz file onto the jump drive, as well as Linux mint and crunchbang with unetbootin all to no avail; pressing F9 at bios startup refuses to show the jump drive. Booting from the drive is enabled (as far as I can see) in the BIOS.
View 1 Replies
View Related
Jun 8, 2010
I recently got a Canon Powershot SD780 IS. It takes HD video at 780p. It's great, except that the videos won't display properly in Ubuntu Netbook Remix (Lucid) on my Dell Mini 10v.I've tried using Gstreamer (Banshee), Xine (Totem-xine), and MPlayer (GNOME MPlayer). These all should have worked, which makes me think something may be wrong either with the files themselves or my computer. Anyone have any idea what's going on here?FYI, when I pull up the Properties dialogue for one of the videos and look in the Audio/Video tab, it says:
Video
Dimensions: 1280 x 720
Codec: H.264 / AVC
[code]....
View 4 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Jan 12, 2010
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies
View Related
Oct 19, 2010
I have a Dell Latitude C840 with a nVidia GeForce4 440 Go card and the screen is reported to go to 1600x1200, 32 bpp on Wikipedia. But I am unable to choose that resolution in Slackware. last time i changed the resolution to a higher one i needed to edit the xorg.conf, and change the HorizSync setting to match the monitor. but im unable to find the specifications on the screen for the C840. is there another way of doing this ? mabye a nVidia driver or something ?
Code:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 50.0
# HorizSync30-64 # multisync
# HorizSync31.5, 35.2 # multiple fixed sync frequencies
# HorizSync15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-90
EndSection
View 5 Replies
View Related
Mar 27, 2011
how to install wireless driver on inspiron 1012 mini on ubuntu server 10.10 32bit. Not shore what is the wireless card name. I have no internet acsess whit that pc but can copy files whit usb from another pc.
View 9 Replies
View Related
Oct 26, 2010
Inspiron 1525 - Wireless 1395 WLAN Mini-Card I passed two days browsing the net looking for a solution to my problem but no way.. Im running ubuntu 10.10 in my inspiron via VirtualBox and my wireless card is not detected by ubuntu.. I installed the bcmwl6.inf driver with the wrapper and it show me in wireless window that the hardware is not present.. So checked that in the terminal by typing :
Code:
lshw -C network
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
[Code].
View 9 Replies
View Related
