I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.
View 2 RepliesI am unable to print on my Brother mcf 440cn printer. Every thing was working ok, today I finished some work in Open Office and could not print the saved file. I get an error unable to print msg. my printer is no longer recognized on the system. I reinstalled the driver no luck. I tested the printer with Windooze and every thing works fine
View 4 Replies View RelatedI have been trying to get 5250DN brother printer to print envelopes correctly and Have tried installing the ppd and a host of other things and still within openoffice on karmic nothing works correctly I have also installed the brother package specifically from the repository via synaptic as well
View 2 Replies View RelatedI've recently installed F15 LXDE RC from the livecd and connected my USB Brother All-In-One MFC-5440cn printer. After following the Brother installation page, the Cups & LPR drivers are installed but when I'm in the cups page (http://localhost:631/admin), the printer will not print a test page or print from any application. The LCD panel on the printer does show 'receiving data' but nothing comes out. The last version of Fedora I had running was F13 and the same printer worked fine.
Are there any other printer drivers I need to install besides the Brothers? The printer does show up in the Print Manager but nothing prints. I did have this same type of issue with Mageia Beta 1 and ended up installing a2ps, which wasn't included in the original print drivers, and it is now printing. So I had to install a2ps with F15 but still no print output. Something must have changed with the recent distros causing this. After looking at the output of dmesg I see this:
Code:
WARNING! power/level is deprecated; use power/control instead
[14.867397] udev-configure-printer[587]: add /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2/1-3.2:1.0
[14.867991] udev-configure-printer[587]: parent devpath is /devices/pci0000:00/0000:00:13.2/usb1/1-3/1-3.2
[14.869115] udev-configure-printer[587]: Device vendor/product is 04F9:016D
[14.880470] udev-configure-printer[587]: MFG:Brother MDL:MFC-5440CN SERN:- serial:BROM5F412304
[14.880520] usbcore: registered new interface driver usblp
[15.902920] udev-configure-printer[587]: failed to connect to CUPS server; giving up .....
Any idea why it's failing to connect to Cups or any idea how to find out? Is it possible to have too many USB devices connected? I'm using a 4 port usb hub in use and also using a usb mouse/keyboard connected.
I have just purchased a brand new Brother printer MFC-250C which includes a fax/copier/scanner but mostly its for printing photos however Ubunto 10.4 does not recognize this model! (it works perfectly over on my other partition with windows7 using the setup disk for Brother). I have installed everything related to Brother from Synaptic and searched the Brother web site for any drivers relating to this model and have even tried installing from Synaptic MFC-240C drivers in case they may work (no 250c available in synaptic) selecting PRINT for instance in Fspot my printer receives information for the photo but does not commence printing ..the same applies working in Gimp Gutenprint.
View 1 Replies View RelatedNew 3040CN on 64-bit lucid. Test pages from console work fine. Cannot print using network or USB. Can http to printer on net, and system recognizes printer when USB attached. Downloaded and installed Brother's cups & driver files (despite being labeled as 64bit, they were i386) No 3040CN found in driver selection listings! system-config-printer thinks the driver should be for an Epson Stylus Photo 2200!
Tried various generic and foomatic PCL printers.
Tried attachment to lpd://10.10.10.20/binary_p1 and socket://10.10.10.20:9100. No results with lpd address, jobs are just lost. With socket address, get blank pages. Can't find an lpd file for this printer online.
I'm having trouble printing on my Brother MFC-8640D printer. I've tried both Ubuntu 10.04 and 10.10, neither of which work reliably although a page will occasionally print. I can print just fine from my dual-booted Windows 7 installation. Thunderbird seems to always print OK, OpenOffice writer prints sometimes, other programs don't print at all or are inconsistent.
View 1 Replies View RelatedI believe I have installed my Brother HL 2040 printer on my Fedora 11 64 bit system. However, every time I click printer the printer goes through its warm up procedure but it does not print anything. There is paper in the tray and I know it was working when I was running Fedora 10. It is shown under the Printers heading under Administration.
View 4 Replies View RelatedMy wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI have been attempting to get my Brother printer to read on my Ubuntu Maverick 64bit system with nothing but failure. I have downloaded all of the appropriate packages and I am now at the point where I am getting the following msg
sudo dpkg -i --force-all --force-architecture mfc6490cwlpr-1.1.2-2.i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 176291 files and directories currently installed.)
Preparing to replace mfc6490cwlpr 1.1.2-2 (using mfc6490cwlpr-1.1.2-2.i386.deb) ...
Unpacking replacement mfc6490cwlpr ...
start: Unknown job: lpd
dpkg: warning: subprocess old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
start: Unknown job: lpd
dpkg: error processing mfc6490cwlpr-1.1.2-2.i386.deb (--install):
subprocess new post-removal script returned error exit status 1
start: Unknown job: lpd
dpkg: error while cleaning up:
subprocess new post-removal script returned error exit status 1
Errors were encountered while processing: mfc6490cwlpr-1.1.2-2.i386.deb
I am using debian Lenny and a Brother MFC-665CW printer. I am trying to print a PDF, but nothing happens. I'm not sure if I've ever printed in Lenny (recently upgraded from Etch). It worked fine in Etch. I "added" the printer again in KDE Print and it spat out a test page, but it does absolutely nothing if I send the document to print.
View 14 Replies View RelatedI just installed openSUSE 11.3 (Gnome GUI). All hardware functions pico bello (Agfa SnapScan e42), card reader ACR038, but ... I can't get my Brother HL-2030 to print.
It is not on the list of Brother printers to be chosen from, so I went to the Brother site in order to get the correct driver, where I can download, after having clicked on the Brother 2030 rpm, a file called cupswrapperHL2040-2.0.1-1.i386.rpm.
So, this is the first thing that surprised me : 2040 instead of 2030 ?
I then tried to install it by right-clicking on the item and then choosing Open with package installer but it returns this error :
nothing provides brhl2040lpr needed by cupswrapperHL2040-2.0.1-1.i386
I remember I had the same problem after installing openSUSE 11.1 but I was able to resolve it rather quickly. So, with openSUSE 11.1 I could print what I wanted.
I am having difficulty with my brother hl-2040 printer. Linux recognizes the printer and it's set as the default. The job shows up in the printer queue as completed, but nothing comes out of the printer.
View 5 Replies View RelatedThis site has drivers for my new Brother HL-3040CN laser printer ... but it says its the wrong architecture when I try to open the first one with GDebi Package Installer. I'm kind of stuck now ...should I try just plugging the printer into the computer with the network cable and seeing if Ubuntu will automatically take care of drivers? For reference I saw this topic when I googled the issue [URL] This site says 64 bit drivers are available for Ubuntu 9.10, only 32 bit drivers are available for Ubuntu 10.04. I am running 10.04 (64bit) ... should I return the printer?
View 6 Replies View RelatedI had it printing until the last cups upgrade. Brother support thinks it is something to do with the upgrade. We did a reinstall of the printer driver. The printer works on Virtual Box and the scanner works on Ubuntu, but not the printer. What do I need to have the printer work under 11.04?
View 9 Replies View RelatedAbout a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.
View 4 Replies View RelatedI upgraded from Karmic to Lucid RC a couple of days ago and have been trying to work through a few problems since. One of these problems is printing with my Brother DCP506CN printer which was working in Karmic. However, I just can't seem to get it going in Lucid. I have followed the Brother linux install procedure, which worked for the the last few Ubuntu releases, but not for this one it seems.
View 3 Replies View RelatedI have read the threads and have downloaded the 4 drivers/files from the brothers site and installed them.. but still can not get my USB cabled printer to work what am I missing I am running Ubuntu 10.04 sounds like brother is not the printer to have in case their is no fix what brands of printers are best for compatibility?
View 1 Replies View RelatedAnybody else using this printer? I have tried the driver direct from Brother, requires cups and the driver.Both installed, both fail. I read on another forum to try a Brother HCL type and it works, but why?
View 3 Replies View RelatedI have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04
1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"
above is found at: [URL]
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies View RelatedI'm trying to download this driver with my UBUNTU 11.04 but theres so many steps I'm not sure I'm doing it right. I downloaded SUSE but I dont know how to get it to run. I'm also in the process of downloading Cups But I don't know what to do with that either.
View 1 Replies View RelatedIs there a driver for the Printer Brother HL-2140 to be used with Ubuntu 9.10. and how to install.
View 1 Replies View RelatedIt has worked in several releases 7.10 8.04 8.10 9.04 but stopped working in 9.04. I have tried everything (to long to list) need some bullet proof help!
View 1 Replies View RelatedI am unable to get a Brother MFC-5460CN printer to print on a fully updated F12 system. Everything looks normal in Administration | Printing. All fields match the format shown on the Brother site. The printer status is updating correctly so there is communication to the printer. But jobs just queue and eventually show as printed but nothing is actually printed. There are no other printers. Here is the output in /var/log/messages from plugging in the printer and trying to print a document:
Code:
Apr 4 21:23:34 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device found, idVendor=04f9, idProduct=01b7
Apr 4 21:23:34 localhost kernel: usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
Apr 4 21:23:34 localhost kernel: usb 2-2: SerialNumber: BROJ6F904373
Apr 4 21:23:34 localhost kernel: usb 2-2: configuration #1 chosen from 1 choice .....
I followed the instructions on the Brother Linux drivers page and all the rpms loaded without error. But the log is showing some type of key problem.
Can anyone give me step by step instructions on how to install Brother HL-2170W wireless printer on Ubuntu 9.10 Desktop.
View 9 Replies View RelatedDon't know where this should go, so I put it here for starters! I want to print documents on both sides of an A4 sheet, using a Brother HL-1230 printer. Is there a way of getting the odd numbered pages out first (then a pause?) and the even numbered pages after? To do this manually is tedious on a long (14 page) doc. Way back in the days of that other op. sys. I had a program (WordPerfect?) Whose printer driver would do this. Is there one for Ubuntu?
View 1 Replies View RelatedI do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.
View 1 Replies View RelatedI have just installed Ubuntu 10.04 LTS on my AMD 64 bit desktop. I have a usb connection for my Brother MFC 8860DN printer. I used the synaptic package manager to install the printer drivers ubuntu already had in their repository for my printer model. When I connect my printer to the computer Ubuntu recognizes the model, but cannot detect the printer drivers I have already installed. The printer drivers were installed to /usr where a Brother folder was created. the Cupswrapper and lpd files are in the Brother folder. How can I get the system to detect its own files so I can get the printer to work?
View 9 Replies View RelatedI recently re-installed lucid on a computer which had a working ethernet printer queue, to a Brother MFC-5490cn. I installed the drivers from the ubuntu package archive and set up two printer queues, one for "dnssd://<ip-address>" and the other "lpd://<ip-address>/BINARY_P1". The first appears to recognize that the printer color ink is low, so perhaps there is some communication, but nothing ever comes out of the printer. The second queue appears to fail completely.
I vaguely recall that for my previous installation I used the package supplied by Brother, but that it was very difficult, since the package no longer matched the Ubuntu file layout and locations.