accessing webmin in redhat 9? the pc is set to name as localhost.localadmin and running whithout network connectivity, i just want to try and access webmin to see if my 10 users are viewable.
I tried http://localhost:10000 but error appears: connection refused while trying to contact localhost.localadmin:10000
How do I allow webmin for remote access. Currently I can only access it locally from the system.
View 3 Replies View RelatedTwo servers, one is RHEL 4, and the other is RHEL 5. They are both on the same subnet, one is 10 the other is 11. I added the Webmin rule to the iptables config file but for some reason, the RHEL 4 server, I can access Webmin but the RHEL 5 server I can not. I checked the iptables file and they are the same for both servers, except two rules which are for other ports.
I'm reading about the iptables and had a problem when I manually added the port 10000 entry after the REJECT entry, but wondering if I need to move it up higher or maybe there's another possible block?
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
I'm new here and I didn't really use linux before. My problem is, there was an admin at the company. I rename it's username and add a new password to it. The Linux fileserver uses Samba. I have an XP PC, which was the admin's mentioned above, and it can't access to the fileserver since I rename the admin's username and password. Can it be the problem, that I did it in graphic mode, not in console? I did it with smbpasswd too, but it isn't working. Do I need to write something in the smb.conf file or something? If I miss to write down something important please ask, but don't swear at me.
View 1 Replies View Relatedi am unable to access internet in linux editions (redhat 5.4 & centos 5.5) recently i have taken a reliance internet connection but the think is i didn't get any ipaddress from reliance, but i accessing internet in window 7 and i have triple boot. pls any one give the solution.
View 3 Replies View RelatedI have recently started using linux. I have installed Openldap from Redhat CD V5.1. Wanted to ask does openldap have web console? If yes, how do we access it?
openldap is installed at 127.0.0.1. (localhost)
If no, All the schema we will implement should be mentioned in slapd.conf file?
Want to access usb drive in redhat enterprise linux
View 2 Replies View RelatedWe have a Oracle 11.2 database running on Red Hat 5.5. The database have a scheduled job to fetch some files from another server using ftp, and herein lies the problem.he job runs a pl/sql that runs the function in an (by us compiled) external libraryThe ftp-functionality itself is done by using libncftp and it's API's.The process starts correctly, but then trying to login to the actual ftp host, ncftp only reports "Unknown username/password" (which is not the case).I have the exact same code in an executable and when run from an interactive shell, it works fine.So the only thing I can come up with, is there are differences when the process is started by Oracle, rather then being ordinary" process.And I am stuck.If there are any environment variables, paths etc missing when running the extproc-process, how do I find out which?Because the real problem is NOT wrong user or password.
View 8 Replies View RelatedI'm pretty new here and I want to be able to set up my Linux box as a shared drive (so that I can use it as a backup drive to my win7 machine). I'm using webmin to administer Samba and I get to the point where it shows:
Share Name Path Security
homes All Home DirectoriesRead/write to everyone
When I go to my win7 machine it I can browse to the machine (called jira2) and see the folder called homes, but when I click on the folder it says Windows cannot access \JIRA2homes. if I expand the details it says Error code 0x80070035 I am running Ubuntu 10.04.
I just installed webmin, then added the line for port 10000 into my iptables. I restarted iptables, but I still can't get to the webmin page on my server. If i stop iptables, i can connect to it. did i edit iptables wrong? could something else be blocking it?
# Firewall configuration written by redhat-config-securitylevel
# Manual customization of this file is not recommended.
*filter
[code]...
I encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
I keep receiving the error message in the title above whenry to enterebmin.abc.com/webmin. I'm on Ubuntu 9.10. Other errors I'll receive are "You do not have access to any Webmin modules". Wondering if anyone knew what settings our permissions on files I could change to avoid these error
View 1 Replies View RelatedI cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedIm am working on a system which runs on RedHat Enterprise I have been asked by superiors to see if the following is possible. (sudoers file config change i guess)
Example
User1 has root access
user2 has root access, but must not be able to access ctmag (user account)
I know the obvious here is that if user2 can switch to root then it won't work. But i just need to prevent user2 from su - ctmag. A password is set on the account ctmag, but as user2 has root access it switches without a password prompt
Is there anyway i can prevent user2 from switching to ctmag but still have access to root?
I'm was wondering if there is such a feature in webmin (or perhaps any other webgui) that would solve the following problem:
I need a few people to disable/enable users in a specific group, any only in that group.
Ex: Employee A logs in to webmin to enable an user account for employee B that is a member of the group "disabled by default".
Employee A are not able to disable/enable any accounts outside the "disabled by default"-group.
Would that be possible in webmin or any other webgui?
I recently installed Ubuntu server 9.04. It appears to be functioning correctly in that I can acces it from other Windows machines ony my network. I installed Webmin to remotely administer this server, however I cannot connect using Webmin from my other machines. I am only running Samba on this server at the present time.
I attempted to access the webmin conf file at /etc/webmin/miniserv.conf but permission wasa denied, evenas root.
I have fedora 13 (with samba) and XP on Vbox (same LAN). Installed webmin on the fedora machine and created a shared folder (/home/myshare). stopped iptables, gave the folder chmod 777 and tried reaching the folder from the XP with no success.
View 2 Replies View RelatedI just finished configuring my BIND DNS server through the Webmin interface.
When I try to start BIND, I get the following error:
Code:
This is the named.conf configuration file:
Code:
What I need to change in the file?
I Have setup a mail server On Centos 5.Everything is working except i am unable to fetch mail on my local machine, it gives following error code...
View 4 Replies View RelatedFrom the posts relevant to postfix I could not find the particular combination of issues I'm facing. Any pointers or references to posts will be greatly helpful. I have CentOS server running Postfix which was recently moved into my house running over TW cable (Austin RoadRunner). In Webmin -> Postfix Mail Server -> General Options - Other General Options - 'Send outgoing mail via host' (which is the relayhost) is set to:
Code:
[URL]
I expected the relay to reflect this in the log but it doesn't When I send an email I see this in /var/log/maillog
Code:
Jul 21 17:10:46 cromagnon sendmail[14853]: p6LMAjlu014853: from=root, size=49, class=0, nrcpts=1, msgid=<201107212210.p6LMAjlu014853@cromagnon.com>, relay=root@localhost
And a timeout occurs a little while later
Code:
Jul 21 17:17:04 cromagnon sendmail[14853]: p6LMAjlu014853: to=ravi@pobox.com, ctladdr=root (0/0), delay=00:06:19, xdelay=00:06:18, mailer=relay, pri=30049, relay=[127.0.0.1] [127.0.0.1], dsn=4.0.0, stat=Deferred: Connection timed out with [127.0.0.1] I basically *all* mail from all domains on this server to go through the relayhost. I understand there are a million caveats but I wish someone could help me with the basics.
BTW I've also tried to set the relayhost to
Code:
[URL]
however the log still shows . . .relay=root@localhost . .
Whenever I try to take backup from webmin I get following error message.
Starting backup of module configuration files to /Applications/backup.tar.gz ..
.. failed! TAR failed :
I don't understand meaning of this error.
I'd like to use a webmin to execute scripts as the picture. When I press "Stop friendly" button, it will execute the script that is located at /home/kenzo/stopfriendly.sh or it will execute /home/kenzo/stopserver.sh when I press "Stop" button.
View 5 Replies View RelatedI try to access my mysql in webmin but i cant see it in Servers submenu.My mysql is already started.I can search the mysql in webmin search bar.I just want the mysql be place under Servers submenu..
View 1 Replies View RelatedI am running a video script on my server and I am very new to running a dedicated server and commands. Most of our site was setup but other and someone has broke something and no one seems to know how to fix.
Here is the issue. We run a script that uses these requirements
[Mod edit]Adult content Link removed
requirements
Now our server guy ran a update inside webmin for debian and now our videos still convert but wont make thumbs. Here is what he did.
Now updating libsmbclient ..
Now the AVS script wont make thumbs and webmin still wants to do 3 more updates that get unmet dependencies errors. Here they are when we try to run another update.
Building complete list of updates ..
Now what we need to do is either undo the update he already did or maybe get the one its asking for now to work but not sure which one will fix our thumb generating problem? Here is the error in the log file of the AVS script.
Seems stream 0 codec frame rate differs from container frame rate:
I am using Webmin to access a database. I finally acquired a static IP address. After entering it into the allowed host for the PostgreSQL server, I still can't access it through the SQL Manager for postgres in Windows. It doesn't seem to actually make the change. I am the new person managing this database. The old person use to be able to just add an IP address and it would connect. Is there something I am missing that I may need to install?
View 1 Replies View Relatedi want to configure my squid sever in ubuntu with webmin.first my machine spec i have xeon with two prosesors 3gb RAM 3 scsi hard drives each 72gb .two ether net card ,one is attached with adsl modem and the second is conected with MY LAN . now what i want is to configure my server to acess only those user whos ip bind with mac. and act transparent proxy sever with user bandwidth control.thats it
View 1 Replies View RelatedI had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedI installed webmin, and I tried to access it with my account (not root, but able to sudo) and I always got login failed.Now I have Access Denied even to my login page for too many tries. What should I do?
View 1 Replies View Relatedcan i install webmin lightweight linux O.S thinstation ?
View 1 Replies View Related