I installed webmin, and I tried to access it with my account (not root, but able to sudo) and I always got login failed.Now I have Access Denied even to my login page for too many tries. What should I do?
View 1 RepliesA friend of mine can't remember her password for the computer.When the computer starts it automatically loads her user profile, i can't create any new users, and i cant become root with sudo, i looked around on the forums and some stuff was very helpful in teaching me more about linux, but without being able to change, or remove the password i cant update. the laptop is a dell 910 mini.
At the terminal, instead of being: User@localhost, it's : name@name
I'm was wondering if there is such a feature in webmin (or perhaps any other webgui) that would solve the following problem:
I need a few people to disable/enable users in a specific group, any only in that group.
Ex: Employee A logs in to webmin to enable an user account for employee B that is a member of the group "disabled by default".
Employee A are not able to disable/enable any accounts outside the "disabled by default"-group.
Would that be possible in webmin or any other webgui?
I'm ssh'ed into a machine and logged in as a different user. Is it possible to open a few new windows that will still be ssh'ed into that same machine, still logged in as that user?
View 2 Replies View RelatedI am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
I have had webmin running previously but i just recently installed Unbuntu server and i am now trying to install webmin. after typing this to install webmin sudo apt-get install webmin it started doing its thing and then it halts.
Giving me the following message: "Package webmin is not available, but is referred to by another package. this may mean that the package is missing, had been obsoleted , or is only available from another source."
The first thing i did after installing webmin was edit the sources.list
Then i tpyed sudo nano sources.list I uncommented everything with "deb" in front of it
I also uncommented
deb cdrom:
I then typed this sudo wget [url]
After getting that i typed this apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl
Then i tryed to install it and got that error.
I also tryed install it using this tutorial [url]
When i got to the part when i need to type
sudo apt-get install update this is what happened
I have an OpenSuSe 11.0 running openldap (managed by yast) for user authentication on some services.Is there an easy way that I can provide for users to change their own passwords (Preferably a web interface)?
View 1 Replies View RelatedI have created a yum repository in my local network. Everything seems to be working well except the yum server doesn't remember what was updated, every time I run yum on it the same fies are updated (306 files). And the versions I checked are the same as the files already installed.
____________
yum .conf
[main]
[code]....
Every time that the internet connection is lost (because of hibernating etc.) I have to re-enter the password for the router. It used to remember this but for some reason it doesn't any more.
View 7 Replies View Relatedon every boot, I have to enter DNS address again. this problem started with latest update to debian64 testing.
View 5 Replies View RelatedI was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?
View 1 Replies View RelatedI am using the sudo command to log on locally as another user by the following command:
sudo -u theotheruser -s
or
sudo -u theotheruser sh
As I see it, this initiates a new shell with the mentioned other user.However, this doesn't load that users profile from his home directory.Is there a way to automatically read the users profile when login in with selected command? I am mostely interested in getting a working prompt when logged in.
there's one major issue left preventing Ubuntu from running flawlessly on my hine.Ubuntu doesn't recognize DVD-RWs once written on. The problem occurred with my old drive (LG GSA-H55N) as well with my new drive (Samsung SH-S222L).I'm using Sony DVD-RW (1x-2x speed)
Ubuntu only recognizes blank DVD-RWsonce written on - no matter whether written by Brasero or Windows 7 - Ubuntu isn't showing any drive in Nautilus nor in Brasero after putting in the DVDtherefore I can't even erase themboth of the drives as well as the DVD-RWs are working perfectly fine on Windows 7 (erasing, writing)I managed to get all other things working by now. My system is close to perfection and this is the only remaining major issue.
was just working the other day, now no command, even cd.. wont work...how can I fix this?
View 9 Replies View RelatedI've read through some threads here but the problem I'm having doesn't seem to be the problem others are having.
I just reinstalled 10.04 today after my last installation messed up after a month.
early when I first installed the terminal and sudo were working perfect but now, this is what I'm getting:
[sudo] password for dimebag:
<password>
Sorry, try again.
[sudo] password for dimebag:
[Code].....
I tried every solution I saw and nothing works. I've been having a heck of a time trying to install things.
I am using LuckyBackup to back up my laptop disk to a USB disk. I would like to display to the user the message "Please mount backup disk" and have the user click "OK". LuckyBackup has a feature to allow issuing commands before it does the backup. I have been investigating scripts (I have never written one.), but do not understand how to use them to this end.
View 4 Replies View RelatedI installed webmin on Debian apt-get install webmin. After installation following message came.
Code:
Setting up webmin (1.510-2) ...
Webmin install complete. You can now login to https://IP:10000/
as root with your root password, or as any user who can use sudo to run commands as root. So I infer that the installation was successful.
But when I do
Code:
http://IP:10000
I get following error
Code:
Error 111 (net::ERR_TUNNEL_CONNECTION_FAILED): Unknown error.
I have installed webmin. I am configuring ldap server using webmin gui. when i try to add user by ldap user and group I get following error. Failed to save user; Failed to add user to ldap database; modification required authentication. I am new in ldap configuration and hope for best reply.
View 1 Replies View Related[code]...
The variables are clean and available in my script. No prob. $old is an IP-address of a server, $new as well. replacement-file is an xml-file (the ip-address to be changed is within an xml-tag). It should be trivial, but it isn't. I spent the last 3 hours reading about the problem, trying several different 'solutions' or workarounds. It should work, the '"' should take care that the variables get expanded, but whatever I try the old server IP isn't replaced.
I am trying to be a super user in terminal but I can't. I am sure that I type the correct password, I check also the caps lock button and the language. Also I can't go to the yast. note that the root password is exactly the same as user password
Code:
nobani@linux-m9c6:~> su
Password:
Permissions on the password database may be too restrictive.
su: incorrect password
nobani@linux-m9c6:~>
I am using KDE 4.3.5 on openSUSE11.2
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
View 6 Replies View RelatedI need to instruct sendmail to accept mails that are destined to users that are not available on my server and then forward those emails to catchall@mydomain.tld.Please remember that i don't want to forward every single mail to catchall user. I just want to forward those emails which would be destined for users that do not exist on my server.i have used define(`LUSER_RELAY', `local:catchall@d.com')but it doesn't seems to work.
View 2 Replies View RelatedMy wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
View 5 Replies View RelatedI have two sound devices, an internal audio device on my motherboard and an external USB devices, which came with my headset. After upgrading to 11.4, the microphone on my headset ceased to work with my softphone. As it turned out, the softphone used the standard input device, which was defined in the Phonon tab in the KDE System Settings. Unfortunately, when I put the USB Device on top of the default input stack, it doesn't stay there. When I apply the changes and leave the Phonon tab or even enable "Show advanced devices " the stack always resets to its initial order. I was unable to find any kind of config file where Phonon saves this settings.
View 4 Replies View RelatedI'm building a simple(?) socket server using threads to serve up a few requests. The spec is such that I have to listen to three ports at once, so I decided to use pthread to create three separate threads that would wait for connections, then spawn new threads to handle them.
The problem is that when I do this, for some reason the program never enters the wait loop and instead terminates (All three threads did get created since the messages get printed properly.) It gets to the line which prints "???", but not the line after the accept() call.I don't see an open port when I check for one either so I'm 99% sure they're terminating.Basically I have a main() method which has three calls to pthread_create, which should result in three threads being run that all wait for connections (listenOnPort). After each thread creation I print some info to make sure it's actually being created.
By the way, when I just run listenOnPortwithout threading, the server appears to enter the loop correctly and seems to be waiting for requests. It's only when I run the functions as threads that the problem seems to happen.The source is attached below. Any help will be appreciated. Much of the code is borrowed from a website (I can't post it because I am new here.) You need not worry about the handler_ methods because those are just methods that are run by the threads themselves.
Also--the original source was in C and I changed it to C++. Should I just use C?
server.h Code: /*
* server.h
[code]....
I keep receiving the error message in the title above whenry to enterebmin.abc.com/webmin. I'm on Ubuntu 9.10. Other errors I'll receive are "You do not have access to any Webmin modules". Wondering if anyone knew what settings our permissions on files I could change to avoid these error
View 1 Replies View RelatedI encountered a a dependency issue when trying to install Webmin on Ubuntu Server Edition 10.04 Beta1.
When you try to install webmin, libmd5-perl is not available in any of the lucid repositories:
I resolved the dependency prob by adding the following repository to my /etc/apt/sources.list: deb [url]
Then I did a sudo apt-get update then sudo apt-get install and libmd5-perl installed fine along with webadmin. BTW. I got a GPG error when doing a apt=get update because I did not import the public key for the debian repos I used to get libdm5-perl, which doesn't matter to me as I commented out the repos once I got libmd5-perl installed.
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
How do I get the details of the last 10 or 5 mount times for my linux system. Which also includes the times it was mounted from a foreign system running in ram like puppy linux or by another OS on the same hard disk.
View 3 Replies View RelatedI'm running Debian Wheezy and I don't know why, but whenI switch to console F1(Ctrl+Alt+f1) I can't enter login information. It's like Debian didn't have completely starting and wait always.The F1 console looks like this:
[screen content]
Starting enhance syslogd: rsyslogd.
Starting system message bus: dbus.
[code]...