i am unable to access internet in linux editions (redhat 5.4 & centos 5.5) recently i have taken a reliance internet connection but the think is i didn't get any ipaddress from reliance, but i accessing internet in window 7 and i have triple boot. pls any one give the solution.
View 3 Replies
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
I am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies View Relatedi install redhat 5 in my system . in which mozilla not working means any site isnot open and no one site in ping.wat should i do now.
View 3 Replies View Relatedaccessing webmin in redhat 9? the pc is set to name as localhost.localadmin and running whithout network connectivity, i just want to try and access webmin to see if my 10 users are viewable.
I tried http://localhost:10000 but error appears: connection refused while trying to contact localhost.localadmin:10000
I'm new here and I didn't really use linux before. My problem is, there was an admin at the company. I rename it's username and add a new password to it. The Linux fileserver uses Samba. I have an XP PC, which was the admin's mentioned above, and it can't access to the fileserver since I rename the admin's username and password. Can it be the problem, that I did it in graphic mode, not in console? I did it with smbpasswd too, but it isn't working. Do I need to write something in the smb.conf file or something? If I miss to write down something important please ask, but don't swear at me.
View 1 Replies View RelatedI have an MSI K9A2 Platinum mobo, which has a 10/100/1000 Fast Ethernet Realtek 8111B built-in, a D-Link DIR-655 Router and a DSL modem. Compared to Windows Visya and other Linux distros ( Fedora 11, Suse 11.1, Mandriva 2009.1 ) access to the internet is much slower. It seems there is a noticeable delay when running CentOS 5.3. before internet access kicks in each time I am surfing the web or updating my system.
Is there any way I can speed things up, or determine why CentOS 5.3 seems much slower ?
I have recently started using linux. I have installed Openldap from Redhat CD V5.1. Wanted to ask does openldap have web console? If yes, how do we access it?
openldap is installed at 127.0.0.1. (localhost)
If no, All the schema we will implement should be mentioned in slapd.conf file?
Want to access usb drive in redhat enterprise linux
View 2 Replies View RelatedWe have a Oracle 11.2 database running on Red Hat 5.5. The database have a scheduled job to fetch some files from another server using ftp, and herein lies the problem.he job runs a pl/sql that runs the function in an (by us compiled) external libraryThe ftp-functionality itself is done by using libncftp and it's API's.The process starts correctly, but then trying to login to the actual ftp host, ncftp only reports "Unknown username/password" (which is not the case).I have the exact same code in an executable and when run from an interactive shell, it works fine.So the only thing I can come up with, is there are differences when the process is started by Oracle, rather then being ordinary" process.And I am stuck.If there are any environment variables, paths etc missing when running the extproc-process, how do I find out which?Because the real problem is NOT wrong user or password.
View 8 Replies View RelatedI have CentOS5.5, it has full access to internet until I did something to it I couldn't figure out. This is not a cable issue since I could ping and ssh to other machines within my lan. Apache is also running fine, which is probably irrelevant. When I type traceroute cnn, it simply hangs, later saying [URL]:
Temporary failure in name resolution
Cannot handle "host" cmdline arg '[URL]' on position 1 (argc 1)
This is a desktop version of CentOS5.5, when i do Administration - Network, it says eth0 is active and Primary and Secondary DNS are set correctly to my comcast DNS server at 68.94.15x.1
is it possible to use yum in any way when a computer is not connected to the internet(but when full install media is available; for example the dvd)? Or should I resolve all dependencies manually using rpm?
View 6 Replies View RelatedI am using a CentOS 5.4 server for Snort (it's actually using the easyIDS config). I'm trying to modify some things, and I've noticed that I can't seem to download any files. WGET, FTP, etc... all just time out. It's not a network firewall issue, as I've been monitoring the logs and see no blocked traffic, and other machines on the subnet can get outside with no problems. I checked the Cent firewall using the setup command, and it says it is disabled as well. I'm very new to linux, so I'm wondering how I can troubleshoot this? The wget and ftp errors just say the connection timed out, but I'm not sure why.
View 2 Replies View RelatedI just downloaded and installed the latest Cent OS 5. I disabled SE linux, turned off the firewall, and selected the Server package options when installing. I plan on using this as a router/firewall between my internal network and the internet, as well as web server, etc. The first thing I did was to configure the two NICs, internal one with 192.168.7.1 address and the other with an address from my ISP (I have a static address, but I also tried to let the DSL router assign an address via DHCP). Everything looked fine, I checked /etc/resolv.conf and my routes. I was able to ping the DSL router from the server, but I was not able to do a ping or lookup on anything outside my network. I tried host, dig, nslookup, etc, no luck. Obviously then, I was not able to browse the net with firefox.
View 4 Replies View RelatedWe have Apache installed on CentOS 5.3 in our laboratory. Indeed the server is running fine for almost two years since it is actually the first CentOS 5 that was released just regularly updated. Now, most of our applications are custom made PHP applications and until now we somehow managed to avoid using PHP to fetch files that are on the internet itself. But now we are desperate because we need to allow PHP to fetch files through Apache but it seems as if Apache is not allowed to make a connection to the outer world. Additionally we use a proxy server to connect to the outer world so right at the beginning http_proxy is used to set that environmental variable. And for the root user it all works fine after that but it seems as if the apache user is not allowed to access the internet. Just to make a remark our web server can be accessed from the outer world so its a one way street for now.
View 1 Replies View RelatedI am using CentOS LiveCD i386 without internet access. I would like to make the application sys_basher, but make is not installed and I cannot find how to add packages without yum.
View 2 Replies View Relatedi want to buy a pci weasel, people told me i will have access to the server over internet with this board.Does anyone have any experience with this kind of card?How can i have access to server over internet to the bios,etc.
View 1 Replies View RelatedI am getting an access denied when trying to log in via SSH to my home server with putty(windows) over the internet. I can use any user including root and get the same result. If I use my Android phone with the ssh terminal command I am able to successfully log in and use the server.
View 1 Replies View RelatedOn my Centos 5 box my internet won't work. I am unable to get update and I can't download any native programs. But I have Samba running and I am able to access all my files for my other computers.
View 6 Replies View Related1. I've just installed Centos 5.5 on a dell machine with 2 network interfaces, and have disabled SELinux.
The output for the command sestatus is: SELinux status: disabled
2. Am I right to think that iptables is not a concern since SELinux is disabled? In any case, the output for the command "iptables -L" is:
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT udp -- anywhere anywhere udp dpt:domain
ACCEPT tcp -- anywhere anywhere tcp dpt:domain
[Code]....
I'm currently working on a project in a secure environment with no internet access and I need to install Ettercap and Wireshark on the machines. I thought this would be a simple task of loading Wireshark onto a USB but this did not work and replied with error messages such as: ' Invalid config x86_64-unknown-linux'
what does the error message mean and do I need internet access to install the apps?
I've installed centos 5 on an old computer with success and it works great.I can access the web server hosted on the centos server from any computer on the wireless and wired local network. I can also use ssh (putty) and nx client from any computer on the local network (wired and wireless) to access the centos server.On the wireless router I've configured a port forwarding to the wireless network interface on the centos server. I can access the centos server from the outside (internet) through this port forwarding both through http and ssh or nx client.MY problem is that I can't access the centos server from the internet through the wired network interface. Any attempt to view a web page or login with ssh or the nx client will timeout.
View 9 Replies View RelatedI'm running a CentOS 5.2 on dom0 and two CentOS 5.2 on domU.The domU use virbr0.I install domU via GUI interface and did not change anything ... the domUcan ping and connect to dom0 but can't access to Internet !!I search google and find someone mentioned that I need to enable IP forwardin dom0 ... I did but my domU still can't access to Internet.What else I need to do ?The routing table of dom0 is:
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]....
I am stepping into Linux world ...and I have chosen CentOS.
I have installed CentOS 5.5 on a dedicated IBM server successfully. My server has two network cards. I have configured eth0 for lease line internet connection with a live IP (113.xxx.xxx.xxx) and eth1 for local LAN with a static IP (192.168.0.1).
Now,
1. DHCP is working fine and I can access the server from my Windows XP clients.
2. I can access the server with SSH client PuTTY from home ( with the live IP ) and from the local LAN (with static IP 192.168.0.1)
3. I can access my shared server directory 'public' from my XP clients
4. Internet is working on sever and I have updated the server with yum update.
But, I cannot access internet from my XP clients machines.
I read "The Definitive Guide to CentOS" and tweaked the config files in different ways but it did not help. now after two sleepless nights I am here as my last hope.
I admit, I am not aware of every linux terms and commands, but I am getting into it. code...
I am working on a system with no internet access so I cant use yum. How do I install a feature like X-Windows or GNOME Desktop Environment(using groupinstall) directly from DVD?
View 3 Replies View RelatedI have a Centos5.4 64bit laptop, having an eth0 and a wlan0. I connect this wired eth0 to a wall socket to access Internet via DHCP (eg the assigned address is like 192.168.192.xx). I do not have access to the ADSL router. How can I turn this laptop into a Wifi access point to allow, say my Ipad or any wireless-only client, to access the Internet thru this laptop ?
That is, communication between iPad to laptop is wifi(ad-hoc connection ??), laptop to the ADSL router is wired LAN. The laptop need to have some bridging build in ? If you can refer me some concepts, then I can follow up from there.
Or better yet, has anybody does this before ?
my problem is sinple, I want to download centos based rpm but i can only find redhat rpm's on the net. can I use redhat rpms for centos?
View 2 Replies View RelatedI cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedIs it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
I Install the redhat linux and ubuntu on a vm ware. I tried to test their Internet connection but the redhat cannot connect. What would be the possible cause why redhat cannot connect to the Internet?
View 5 Replies View Related
