I'm trying to figure out on why when I do a: service bind9 status This doesnt display anything in my command. Should be: Status of Bind9 server: bind9 is running. But this doesnt display at all.
View 8 RepliesHave a Java program which simply connects to a server and gets back the response from the website.
When I use it under Windows environment it runs fine and i receive a Response Code: 200,
Response Message: OK but in UNIX i get Response Code 401, Response Message Unauthorized
In Unix I tried to ping the website using the ping command.
I use putty to connect to a Unix m/c. I don't have any permissions to install any programs so could not install any s/w so i could check if i were able to reach the website.
Is it a Proxy Server related issue ? If yes how do i configure it ?
I have an external hdd that I have added to the fstab so it will mount when I boot. But every time I add the line to fstab and reboot, it hangs during the boot process and says something about ureadahead-other status 4.
Here is my line in fstab..
/dev/sdc1 /NAS ext3 defaults 0 0
I couldn't remember what fs I chose when I formatted it so I did "sudo parted /dev/sdc print" and it said it was ext3.
I want the guification (or similar mechanism) which, when a user updates his/her status message gives me a notification of that. How do I get this?
View 2 Replies View Relatedreason is if someone installs the ATI driver, it will on boot give a white screen, the FGLRX driver wont work on this pc. (already doing second install of OS due to this issue)
View 2 Replies View RelatedI am on a DELL Latitude 6500 laptop. It has a physical button to enable wifi. On Kubuntu 10.10 it was working perfectly. Now that I have made a fresh install to 11.04, whenever I try and turn the wifi on, I get a status message that my wifi is enabled. But the led indicator does not glow. and I could not find my router nor any other routers in my building. The following is some of the that might be useful to debug.
According to this website [url] the wifi is compatible with ubuntu and does not need any external drivers I guess.
Here's the background info -- I recently installed Ubuntu server 8.04 on TWO machines that are exactly identical.On one machine, all seems perfect.On the other, when I execute "/etc/init.d/samba status" it always shows that smbd is NOT running.But it would seem that it IS running, since I can access the shares I've set up without difficulty either from smbclient on the server or from the windows boxes on the network.ps ax lists smbd as a process as well.The log tells me nothing -- it just reports that samba started. No errors. Not much of anything in there. And if I execute smbstatus, that works just like you'd expect.since the two machines are identical (and I mean exactly the same), and only one is doing this.
I guess I should be happy since they both work (seemingly perfectly).But it still bothers me that I'm getting the message that smbd isn't running on one of them. I tried uninstalling samba and reinstalling it on the machine giving me the erroneous (?) status message. But that changed nothing.Right now there's no data on the machine, and it's not in production, so just doing a bare metal reinstall of the OS is an option. But I'd like to understand what's happening.
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
when I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.
View 1 Replies View RelatedI'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedI use ldap to provide account and home directory services for sendmail.Unfortunately,sendmail occasionally (rarely) rejects a message with a "User unknown" status when the user is a legitimate user that has routinely been recognized in previous messages.I have not yet found a reason to suspect that the ldap server is failing to respond properly or in timely fashion to queries.However, since I believe this information is cached by nscd on the local mail server, I am suspicious that the problem may rest with nscd and its database.Is anyone aware of rather random failures to obtain correct information from an ldap query that is actually related to nscd?Also, I decided to just treat nscd as an application for purposes of this post
View 2 Replies View RelatedI have a web server on my local network with a couple domains facing the internet. When I visit these domains from within the network I'm directed to my routers configuration page due to hairpin NAT.
So I installed BIND9 on the server and set up my forwarders to Google DNS to act as a Caching Nameserver. Then I set my routers DNS primary and secondary nameservers to the IP of the local BIND server. Everything is working great.
Now I need help configuring BIND so that the domains hosted on the web server within the network are routed to the web server and not the routers configuration page.
I am using RHEL5. I did not get any response from my system whenever I connect the USB storage device. How could I get immediate response whenever I connect the USB.
View 1 Replies View RelatedI am trying to start a 2nd openvpn service on my server so that clients can connect via udp instead of tcp.However when I run: openvpn /etc/openvpn/openvpn2.conf
I get no response at all.Usually I would expect the startup parameters or at least an error but I get nothing. I have to CTrl+c to get back to the prompt.ANy ideas what I can try?I changed the serve config so it has tun1 instead of tun and also changed the log files to openvpn-status2.log so it doesn't overwrite the other server.I also changed the network so there wouldn't be any IP conflicts. Openvpn1 runs on 172.16.x.x
I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
I can't seem to get BOINC to run on F12. I've installed it from the repositories and downloaded it from the BOINC website. I keep getting an error message "Error Retrieving current status".
View 4 Replies View RelatedI run SUSE on my machine for a year, but I'm really a newbie on Linux. In the system monitor it states:SUSE LINUX Release 11.2 Kernel Linux 2.6.31.5 -0.1 -desktop GNOME 2.28.0Last week when I rebooted my machine, I suddenly found my machine had no response to any click or typing. When the cursor move to any icons, they can be highlighted, but when I click them, no response at all. The weird thing is almost every time after I reboot the computer, it can work for a few minutes, then stop working. But if I press Ctrl+Alt+Backspace, it can be log out.
I think there must be something wrong with my GNOME, 'cause everything seems working fine when I login IceWM. recover the .config file in my home directory. But I don't have this file in my home directory.
I am capturing the response of three URLs which are in file named urls.txt using following command and write response in output.txt file.
####Code############
wget -i urls.txt -q -O - | tee output.txt
###########End of code
Now i am finding the case where url is not responding and that output is not available to me in the file and on console i am getting "Could not connect to host".
Now I want to modify my urls.txt to have two fields:
Name and URL
Example:
URL1 | http://10.0.0.2/xsc/abc
URL2 | http://10.0.0.1/lkj/csv
URL3 | http://10.0.0.5/sdf/plk
I want to execute each url and print there response against each name
Example:
URL1 : CONNECTED
URL2 : NOT CONNECTED
URL3 : NOT CONNECTED
I am writing a bash shell script on RHEL. I need a way to analyze the output from a command, and provide a response to that command depending on what is found.
On the command line this looks like:
In other words I want to script this - capture the output from the mlsmailbox --delete command, respond with a yes if the mailbox was found, and go on if it was not found. There may be other responses to the mlsmailbox --delete command that I need to analyze and respond to as well.
I have installed Ubuntu 10 alongside with Windows XP. Consequently I need to make a choice at boot time. However, I feel that the system is not waiting very long, maybe 5 seconds or so, before going automatically into Ubuntu. Can that time be increased? If so, where or how?
View 1 Replies View RelatedI have a backup schedule running a full backup everyday. I'm using webmin to manage these backup now. The problem is when the dump command sends a prompt asking if we want to rewrite the tape, Webmin does not display this prompt and we end up having to terminate the backup -> erase the tape(which takes a long time) and then run the backup again.I was wondering if there is a technique that could be used to pass "Yes" as a parameter to the dump command, much like in windows? or if there is a more efficient way of getting this done.
View 2 Replies View RelatedI have Kubuntu 10.10. and it doesn't apply changes I did from terminal or any customization except after rebooting.
View 1 Replies View RelatedI am able to boot Fedora 14 to the GUI, log in on the keyboard, see the desktop, and then I get no response from the laptop's keyboard or trackpad.
I do not know how to obtain hardware specifics on my keyboard or touchpad, so perhaps that would be good info for me to start with...
BTW my ultimate goal is to run an Amahi server on the laptop. 2600 has a pentium III 1.13GHz processor and 512Mb RAM
I'm running a cobalt raq550 web server (Linux version 2.6) and I want to install a syslog program on it, something that could log messages and send me an instant email in response to certain messages it receives. Is there such a program?
View 6 Replies View RelatedUsing sed, I am trying to append four commas ',,,,' at the end of lines containing the pattern 'Response' in a text file with lines such as these:
6,Pulse,50,254968,14886,NA,,,,
7,Picture,8,265157,0,1,15045,2,0,15000
7,Response,1,271553,6396,1
7,Pulse,50,274969,9812,NA,,,,
8,Picture,1,290232,0,1,15045,2,0,15000
8,Pulse,50,294969,4737,NA,,,,
[Code].....
After a fresh installation of Ubuntu 10.10 I uninstalled empathy (im using skype). The empathy menu in the evolution indicator was gone after that.I also uninstalled gwibber. But the gwibber status indicator remains within the about-me panel... Uninstalling the gwibber package also removes the me-menu which I want to keep actually. Especially the shutdown/restart... part of it. See attachment.I know there is a shutdown panel-app...but its butt-ugly and it doesnt allow to logon/off.
In another thread I read that the gwibber status shouldnt be there if no account for it is configured... which it is not... I do use ubuntu-one though which is in the same menu... I saw that this issue was addressed at some bug report before, but not fixed yet...
Does anybody know a good workaround to get rid of the gwibber status in the panel while keeping the about me and the shutdown button?
KMail 1.11.4, KDE 4.2.4: I'm migrating from WinXP to Mandriva, and installed KMail at the weekend. Works fine, but I have a niggle - the message list displays headers grouped by month order. I'd like the option of having a simple list (no groups), and suspect that it could be done - but I haven't been able to find out how. I've checked in the Handbook without success, and a search in LQ hasn't turned up anything yet.Any suggestions gratefully received. If this isn't the right place for a KMail query,
View 1 Replies View RelatedI have installed Nagios Core 3.0 (latest version) and currently monitoring more than 80 hosts (servers, desktops, routers and switches).
Everything is fine but status map options are very few and you cannot customize them. all the views are very wierd.
I am trying to use NEXSM but it seems some complex. good solution to imrove the nagios status map.
how to get the status of background command in bash script
supose , rm 1 &
rm 2
how to get status of rm 1 command
I want to know the status of udp received buffer ,before receiving nest packet.Are there any API to know the status of received buffers.
View 2 Replies View Related