General :: Pass Response As Command Parameter?
Mar 10, 2010
I have a backup schedule running a full backup everyday. I'm using webmin to manage these backup now. The problem is when the dump command sends a prompt asking if we want to rewrite the tape, Webmin does not display this prompt and we end up having to terminate the backup -> erase the tape(which takes a long time) and then run the backup again.I was wondering if there is a technique that could be used to pass "Yes" as a parameter to the dump command, much like in windows? or if there is a more efficient way of getting this done.
View 2 Replies
ADVERTISEMENT
Nov 4, 2010
I have an issue that is fixed by changing the lpfc driver to run using MSI interrupts. This is done by adding "options lpfc lpfc_use_msi=2" /etc/modprobe.conf.local file.
Is there a way to make this change using kernel boot parameters?
View 1 Replies
View Related
Dec 28, 2010
How can I pass by reference, a parameter, without assigning a new object? In my first example, var = "changed" creates a new local object. In the second, mylist.append will affect the reference target. How to i achieve the same effect with example 1?
Code:
#!/bin/python
var = "unchanged"
def print_string( var ):
[Code].....
View 2 Replies
View Related
Nov 13, 2010
I want to use the output of a previous command as a parameter to another command. For example: to know where "nice" is stored i typed: which nice output: /usr/bin/nice now the second command i typed is: ls -l /usr/bin/nice Is there a way to have a single command like: ls -l which nice ?
View 4 Replies
View Related
Aug 20, 2010
I am following an instruction on the Internet to set up a timer=1. "You can force use of the timer interrupt by using the timer=1 module arameter (or oprofile.timer=1 on the boot command line" When I type "modprobe oprofile timer=1" at the command line, I got a warning message saying that "Deprecated config file /etc/modprobe.conf" So i want to try other way by setting it at the boot command line.
View 2 Replies
View Related
Aug 6, 2010
I am capturing the response of three URLs which are in file named urls.txt using following command and write response in output.txt file.
####Code############
wget -i urls.txt -q -O - | tee output.txt
###########End of code
Now i am finding the case where url is not responding and that output is not available to me in the file and on console i am getting "Could not connect to host".
Now I want to modify my urls.txt to have two fields:
Name and URL
Example:
URL1 | http://10.0.0.2/xsc/abc
URL2 | http://10.0.0.1/lkj/csv
URL3 | http://10.0.0.5/sdf/plk
I want to execute each url and print there response against each name
Example:
URL1 : CONNECTED
URL2 : NOT CONNECTED
URL3 : NOT CONNECTED
View 2 Replies
View Related
May 4, 2010
I got the following modprobe scripts modprobe -k -q streams what does the -k parameter mean?. is it exist in older modprobe? I don't see -k parameter in recent modprobe.
View 1 Replies
View Related
May 4, 2011
I am writing a bash shell script on RHEL. I need a way to analyze the output from a command, and provide a response to that command depending on what is found.
On the command line this looks like:
In other words I want to script this - capture the output from the mlsmailbox --delete command, respond with a yes if the mailbox was found, and go on if it was not found. There may be other responses to the mlsmailbox --delete command that I need to analyze and respond to as well.
View 3 Replies
View Related
Jun 9, 2011
I frequently use wget to download tarballs and zip files from the web, then either untar then or gunzip them. I do:
Is there a way for me to automatically pass the zip file to tar or unzip WHILE wget-ting?
In pseudocode: wget google.com/somfile.zip && unzip
View 3 Replies
View Related
Jan 5, 2011
when I am running the script below,it performs on whatever logfile u type ,i.e, ./scriptname logfilename.But how do I convert it into a function and then call it from another script.I mean how do I prompt the user to enter a logname and then capture the name in the function and when calling this function from another script how do I pass the parameter.
View 3 Replies
View Related
Feb 18, 2011
How can I pass carriage return to a command. I am writing a shell script whcih generates ssh key pair. It ask for input from user three times. I want to pass carriage return (ie. press Enter button) to this command. Is tehre any way
View 8 Replies
View Related
Mar 3, 2011
I am doing some NSCA log parsing and I want to get an output like this:
2011-Feb-18:11:00:07
2011-Feb-18:11:00:07
2011-Feb-18:11:00:07
2011-Feb-18:11:00:08
2011-Feb-18:11:00:08
[Code]....
I have tried this, but it treats the entire output as a single line, then plops a timestamp on the end (I think):
Code:
sort -b -k4.9,4.12 -k4.5b,4.7Mb -k4.2,4.3 -k4.14,4 foo.log| date -j -f "%Y-%b-%d:%T" "+%s" "`awk -F '[ [/:]' '{print $7"-"$6"-"$5":"$8":"$9":"$10}'`"
View 1 Replies
View Related
Jun 25, 2010
I have access to backup server via rsync protocol (only rsync, nothing else). Now, I want to fetch file from there (which is .tar.gz) and pass it directly to tar command, without saving the archive in local filesystem. To visualize, with ssh access I could:
ssh remote_host cat backup.file.tar.gz | tar xzf - And I will get uncompressed backup locally, without actually storing .tar.gz on local machine. Is it possible to achieve when using rsync?
View 4 Replies
View Related
Mar 3, 2011
I am doing some NSCA log parsing and I want to get an output like this:
2011-Feb-18:11:00:07
2011-Feb-18:11:00:07
2011-Feb-18:11:00:07
[code]...
View 6 Replies
View Related
Apr 19, 2010
I am attempting to write my first ever script from scratch and making some progress.
My first shell script file executes a list of commands contained in a second file. I need to pass a parameter to this command file how do I do this?
View 7 Replies
View Related
Jul 14, 2010
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program(there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]".Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.?
(Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 7 Replies
View Related
Jun 24, 2011
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program (there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]". Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.? (Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 8 Replies
View Related
Aug 28, 2009
I have one distro installed, LILO as the boot loader, and i wonder if it's possible to duplicate the lilo entries with an option which executes some script or command during, or after the boot.Actually, i installed a Slackware + autolaunching virtual machine, but i have two VM, so i need to autolaunch one of them. May i choose it from the very beginning ?
View 9 Replies
View Related
Sep 23, 2010
The university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
View 3 Replies
View Related
Jan 1, 2011
The man page seems to indicate no. There is /etc/rc.d/init.d/halt on Fedora. It has a hard coded pause in it, but there's got to be a better way than to change that script.
View 2 Replies
View Related
Jul 9, 2010
I have a small board that has a static ram board attached to it. I have two different programs that each write to a byte of memory in the static ram board. I get a file descriptor to the device memory with the following code:
int phymemfd;
phymemfd=open("dev/mem, O_RDWR | O_SYNC);
This opens the physical memory for both reading and writing. Next I get a pointer to the beginning of my ram board.
volatile unsigned char *novram;
novram = (unsigned char *) mmap(0, getpagesize() * 31,
PROT_READ|PROT_WRITE, MAP_SHARED, phymemfd, 0x11AA0000);
I do this same code in two processes that are both running and this works fine. Now, if I take out the O_SYNC parameter, one of the programs gets into some sort of weird state.My understanding of the O_SYNC parameter is that it cause the process accessing the memory location to block, not allow another process to run, until the first process has finished writing to it.I can see that if my program doesn't block, I wouldn't really know what was in the memory location, but would I can't see how it would cause any other type of system problem.
View 1 Replies
View Related
Apr 9, 2010
I am trying following script can I do this or is there a way to do find and replace the replacing word is dynamic input by user
echo -n "Enter name:"
read RP_USER
sed 's/text1/$RP_USER/' /home/user/file1 > /home/user/file2
View 5 Replies
View Related
May 6, 2011
I am very new to shell scripting.How does one pass a command-line parameter to a shell script?for the below program
#/bin/bash
mount -t cifs -o user=ramkannan,password=Linux123@ //10.200.1.125/ramkannan /MT
cd /MT/test
date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"`
mysqldump -uroot -pram2@ employeedb > $date.sql
gzip $date.sql
I want to pass parameter for everything,i tried in google and did but iam getting error while passing parameter to all
#/bin/bash
mount -t cifs -o user=$1,password=$2 //10.200.1.125/ramkannan /MT
cd /MT/test
date=`/bin/date "+\%Y-\%m-\%d-\%H-\%M-\%S"`
mysqldump -uroot -pram2@ employeedb > $date.sql
gzip $date.sql
i was getting error while passing parameter to all.
View 2 Replies
View Related
Jan 31, 2011
This started happening about 2-3 weeks ago when i noticed our backups weren't running anymore. whenever i try to run ANY type of scp command I get the following error: warning: Unrecognized configuration parameter permitlocalcommand ssh: FATAL: Illegal -o parameter "PermitLocalCommand no" lost connection
I checked the /etc/ssh/ssh_config file and there was a command PermitLocalCommand commented out, but for testing I even totally removed that line and then in scp forced the use of that file via scp -F /etc/ssh/ssh_config ......
and I still get the same error. This command is nowhere is any of my ssh config files so im at a loss here on how im supposed to fix this!! I even checked my home directory for maybe a ssh config file that might be overridding the system config but nothing.
View 1 Replies
View Related
Aug 5, 2011
I run a 3rd party command line utility and it works fine, but sometimes it says "Error blah blah blah... Connection timed out"
I want to script this utility, but I need to not execute the commands in the script if it gives me that connection timeout error.
bash code to capture that response from the utility? Something along the lines of:
Quote:
#!/bin/bash
3rdpartyutil > /tmp/temp.txt
if [ ! -f /tmp/temp.txt]; then
echo no error, run whatever you need to man
fi
rm /tmp/temp.txt
Unfortunately, that doesn't work because the utility outputs non-error information to the screen even when it is successful, so it always outputs something, I never need to see it, but I do need to be able to act upon if some of that text says "error" or "connection timed out"
View 3 Replies
View Related
Dec 23, 2010
I have the following code :
Code:
E_BADARGS=65
if [ $# -ne 2 ] ; then
[code]...
View 1 Replies
View Related
May 4, 2010
I'm trying to create a program that would locate the oldest file of a certain type on a server. Here's the commands:
OLDEST_PATH=`find -L / -depth -maxdepth 6 -mindepth 6 -type d | sort -f | head -1`
OLDEST_FILE=`find -L $OLDEST_PATH | grep .mp3 | sort -f | head -1`
ls -al $OLDEST_FILE
I'm writing this all in expect but I'm having problems. The main problem I have is whenever I try to run the first command, I can't seem to isolate the result of the OLDEST_PATH so that the 2nd command will work. There always seems to be a newline in the variable and the result is only "find -L" command running and it bypasses the variable. If I can just figure out how to get the 1st and 2nd command to work, then I can figure out the 3rd. Here's some code:
Code:
send "find -L / -depth -maxdepth 6 -mindepth 6 -type d | sort -f | head -1
"
sleep 20
expect -re "(.*)
[Code]....
I know there is a better way to write this. I've tried multiple ways and this just happens to be the last way I've tried it. If you try running this, you'll notice that there is still carriage returns after the result of OLDEST_PATH and it prevents the 2nd "find" command from working properly.
View 2 Replies
View Related
Feb 18, 2011
How can I pass carriage return to a command in the shell script. I am writing a shell script whcih generates ssh key pair. It ask for input from user three times. I want to pass carriage return (i.e., press Enter button) to this command.
View 2 Replies
View Related
Aug 18, 2010
i am trying to write scripts to pass 2 different variables to find command.
find . -name $var1 -exec grep -H $var2
find . -name CDR_2010-07-21 -exec grep -H 9892614477 {} ;
1st variable CDR_2010-07-21(passed by var1) is the file name inside which i am trying to search string 9892614477(passed by var2). i have tried following script
[code]...
View 9 Replies
View Related
Sep 24, 2010
I'm modifying a working udev rule which runs a script that mounts a USB HDD and synchronises files to it.The USB HDDs have been troublesome, losing many files and even losing file systems a couple of timesTo investigate,I want to log the USB HDD product name and serial number so would like to pass ATTRS{product} and ATTRS{serial} values to the script.This may not be possible; I cannot see anything about how to do it in either the udev man page nor Daniel Drake's "Writing udev rules" Version 0.74 but it seems such an obvious thing to want to do, I'm wondering if I've overlooked something.
View 8 Replies
View Related
