General :: 2nd Openvpn No Response
Jul 31, 2010
I am trying to start a 2nd openvpn service on my server so that clients can connect via udp instead of tcp.However when I run: openvpn /etc/openvpn/openvpn2.conf
I get no response at all.Usually I would expect the startup parameters or at least an error but I get nothing. I have to CTrl+c to get back to the prompt.ANy ideas what I can try?I changed the serve config so it has tun1 instead of tun and also changed the log files to openvpn-status2.log so it doesn't overwrite the other server.I also changed the network so there wouldn't be any IP conflicts. Openvpn1 runs on 172.16.x.x
View 5 Replies
ADVERTISEMENT
Jul 19, 2011
when I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.
View 1 Replies
View Related
Apr 5, 2010
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
View 1 Replies
View Related
Aug 9, 2010
i have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
View 1 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
Sep 11, 2010
I am using RHEL5. I did not get any response from my system whenever I connect the USB storage device. How could I get immediate response whenever I connect the USB.
View 1 Replies
View Related
Nov 4, 2010
I run SUSE on my machine for a year, but I'm really a newbie on Linux. In the system monitor it states:SUSE LINUX Release 11.2 Kernel Linux 2.6.31.5 -0.1 -desktop GNOME 2.28.0Last week when I rebooted my machine, I suddenly found my machine had no response to any click or typing. When the cursor move to any icons, they can be highlighted, but when I click them, no response at all. The weird thing is almost every time after I reboot the computer, it can work for a few minutes, then stop working. But if I press Ctrl+Alt+Backspace, it can be log out.
I think there must be something wrong with my GNOME, 'cause everything seems working fine when I login IceWM. recover the .config file in my home directory. But I don't have this file in my home directory.
View 4 Replies
View Related
Aug 6, 2010
I am capturing the response of three URLs which are in file named urls.txt using following command and write response in output.txt file.
####Code############
wget -i urls.txt -q -O - | tee output.txt
###########End of code
Now i am finding the case where url is not responding and that output is not available to me in the file and on console i am getting "Could not connect to host".
Now I want to modify my urls.txt to have two fields:
Name and URL
Example:
URL1 | http://10.0.0.2/xsc/abc
URL2 | http://10.0.0.1/lkj/csv
URL3 | http://10.0.0.5/sdf/plk
I want to execute each url and print there response against each name
Example:
URL1 : CONNECTED
URL2 : NOT CONNECTED
URL3 : NOT CONNECTED
View 2 Replies
View Related
May 4, 2011
I am writing a bash shell script on RHEL. I need a way to analyze the output from a command, and provide a response to that command depending on what is found.
On the command line this looks like:
In other words I want to script this - capture the output from the mlsmailbox --delete command, respond with a yes if the mailbox was found, and go on if it was not found. There may be other responses to the mlsmailbox --delete command that I need to analyze and respond to as well.
View 3 Replies
View Related
Aug 3, 2010
I'm trying to figure out on why when I do a: service bind9 status This doesnt display anything in my command. Should be: Status of Bind9 server: bind9 is running. But this doesnt display at all.
View 8 Replies
View Related
Nov 5, 2010
I have installed Ubuntu 10 alongside with Windows XP. Consequently I need to make a choice at boot time. However, I feel that the system is not waiting very long, maybe 5 seconds or so, before going automatically into Ubuntu. Can that time be increased? If so, where or how?
View 1 Replies
View Related
Mar 10, 2010
I have a backup schedule running a full backup everyday. I'm using webmin to manage these backup now. The problem is when the dump command sends a prompt asking if we want to rewrite the tape, Webmin does not display this prompt and we end up having to terminate the backup -> erase the tape(which takes a long time) and then run the backup again.I was wondering if there is a technique that could be used to pass "Yes" as a parameter to the dump command, much like in windows? or if there is a more efficient way of getting this done.
View 2 Replies
View Related
Jan 1, 2011
I have Kubuntu 10.10. and it doesn't apply changes I did from terminal or any customization except after rebooting.
View 1 Replies
View Related
Feb 20, 2011
I am able to boot Fedora 14 to the GUI, log in on the keyboard, see the desktop, and then I get no response from the laptop's keyboard or trackpad.
I do not know how to obtain hardware specifics on my keyboard or touchpad, so perhaps that would be good info for me to start with...
BTW my ultimate goal is to run an Amahi server on the laptop. 2600 has a pentium III 1.13GHz processor and 512Mb RAM
View 3 Replies
View Related
Jun 22, 2010
I'm running a cobalt raq550 web server (Linux version 2.6) and I want to install a syslog program on it, something that could log messages and send me an instant email in response to certain messages it receives. Is there such a program?
View 6 Replies
View Related
Nov 5, 2010
Using sed, I am trying to append four commas ',,,,' at the end of lines containing the pattern 'Response' in a text file with lines such as these:
6,Pulse,50,254968,14886,NA,,,,
7,Picture,8,265157,0,1,15045,2,0,15000
7,Response,1,271553,6396,1
7,Pulse,50,274969,9812,NA,,,,
8,Picture,1,290232,0,1,15045,2,0,15000
8,Pulse,50,294969,4737,NA,,,,
[Code].....
View 1 Replies
View Related
Jan 14, 2011
I connect to a VPN using openVPN. Now, after the connection is established, all my traffic goes through tun0. My LAN gateway is 10.100.98.4... So, for apps to use my direct internet connnection I did
sudo route add default gw 10.100.98.4
But, I cant use tun0 now. I know this because
curl --interface tun0 google.com
doesnt give me anything.. How do I go about using both connections simultaneously. How can I achieve that?
ROUTING TABLES:-
Without VPN running:-
Destination Gateway Genmask Flags Metric Ref Use Iface
10.100.98.0 * 255.255.255.0 U 1 0 0 eth0
default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0
[code]...
View 1 Replies
View Related
Apr 20, 2010
I had configured Openvpn(2.0.9) server On Centos Machine>its working fine.i had already created keys for clients.Now i want to create one more key for new client.When i tried the "./build-key user " command its showing ""Please edit the vars script to reflect your configuration,then source it with "source ./vars".Next, to start with a fresh PKI configuration and to delete any previous certificates and keys, run "./clean-all".Finally, you can run this tool (pkitool) to build certificates/keys."".
Is there Any way to add more keys without changing Existing keys.
View 2 Replies
View Related
Jun 15, 2010
i want to setup openvpn with preshared key. i want to make my linux system as openvpn server and windows machine as client. both the systems are same LAN. i am using centos 5.3 and windows xp. can u tell me the steps to create a vpn between these two using psk.
View 4 Replies
View Related
Mar 7, 2011
I have installed an OpenVPN server on my OpenWrt 10.03 router [freshly flashed]:
[URL]
It seems "ok".
I connect my pc to the lan port of the router, and i want to try it out. I'm using Fedora 14 with GNOME. In the NetworkManager applet i set these things: this and this. Ok!. i try to connect, but it fails. Here are the logs: [URL]
one important thing: my routers [the one with the openvpn server] ip address is 192.168.1.2, and i didn't had to write it nowhere. so how could the networkmanager applet know the ip address of my openvpn server? i think this is the problem, but i just can't find where to write 192.168.1.2
p.s.: yes, i tried to google for: "No server certificate verification method has been enabled." but i didn't find a thing, and i'm trying for hours now... :
p.s.: if i [on the router]:
iptables -P INPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P OUTPUT ACCEPT
[Code]....
View 1 Replies
View Related
Jan 31, 2010
I need to know the procedure to setup VPN between two network. i setup openvpn access server to do this easy. 1. Step by step procedure to setup VPN 2. Setup VPN with DHCP 3. How to check that open vpn is running successfully.
View 1 Replies
View Related
Jan 15, 2011
I'm using openvpn under linux OS which is Fedora Core 14, in the folder "/etc/openvpn" i put 5 files which belongs to the network server that I should connect to, files are :
two files with the extension ".crt"
two files with the extension ".key"
one file with the extension ".conf"
Now, when I issue the following command (as root) :
Code:
/etc/init.d/openvpn start
It asks for my username & password to the network server, & after I entered the required authentication information, I successfully login, but I get disconnected automatically after two or three seconds.
- I connect to the network without any disconnection or problems under windows
- I use openvpn version "openvpn-2.1.1-2.fc13.i686"
- there was a bug in my OS "Fedora core 14" which is that I cannot activate or deactivate any ethernet cards, which solved by disabling NetworkManager in all run levels
- I disabled iptables
- I disabled selinux
- I got this error in /var/log/messages file when I disconnect from the openvpn network "
Jan 15 21:45:15 ViRuS openvpn[4143]: script failed: could not execute external program
Jan 15 21:45:15 ViRuS openvpn[4143]: Exiting
Jan 15 21:45:15 ViRuS avahi-daemon[1494]: Withdrawing workstation service for tun0.
- I couldn't find the file called "/etc/openvpn/update-resolv-conf"
View 4 Replies
View Related
Jan 20, 2011
i have Fedora 14 OS, i installed an openvpn, & i got a problem with it, which i get disconnected automatically after successfully logined, one of the members here (ZeroSignal ) told me to comment any lines in /etc/openvpn/anyname.conf file, which contain the word update-resolf.conf, & my problem get solved, but now after i logined to the openvpn network & after half an hour (or less sometimes) i got disconnected from the network.
View 3 Replies
View Related
Aug 19, 2010
I had configured openvpn (2.0.9) on my Centos 5.4 machine.I want to route all client traffic through my gateway.So i had enabled (push "redirect-gateway ") in server configuration.Now the problem is the upload speed is very low while connecting through vpn.Normally i got 700 kbps download and 650 kbps upload speed.But while connecting through Vpn the upload speed is only 110-130 kbps but download is almost stable.Here is my Server and client conf Files.
Server
******
port 1194
proto udp
[code]...
View 3 Replies
View Related
Mar 22, 2011
I've set up OpenVPN on a Linux server. All my Internet traffic goes through the VPN from that server. I'm running Windows 7 at home. I noticed in Wireshark that DNS queries are not going through the encrypted tunnel, but instead directly to my ISP's designated DNS servers.
To overcome this, I tried pushing DNS for OpenVPN from the server to my computer, and also inputting the DNS address in my wireless adapter's configuration options. This appears to have secured the DNS leak, but is it the proper way to go about it? If I didn't push the DNS address from the server to the client and only set the DNS in the client's wireless adapter, then I couldn't visit any website. And if I just pushed the DNS but didn't set it in the adapter, then some DNS requests still leaked to the ISP's DNS servers.
View 1 Replies
View Related
May 12, 2011
I'm trying to setup openVPN on debian, well this worked. But every client will get the same ip (172.17.0.6 - local it is). how to set my server in bridge mode. I've read about: server-bridge LOCALIP 255.255.0.0 172.17.1.20 172.17.1.100
BUT, my server has no ipv4 address, but only ipv6: 2001:41d0:2:b2d6::542a:74a so I am not sure how I can do this.
View 1 Replies
View Related
Aug 31, 2011
I've been working with my OpenVPN server for a while, and I have a rather interesting problem. I need to redirect all client traffic through the tunnel except for a couple IP's that need to be resolvable locally. The way I'm doing this is pushing these routes from the server:
Server 'PUSH' directives
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
I'm seeing that translating into these Windows routes:
Windows routes occurring
Wed Aug 31 15:14:35 2011 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,route 10.8.0.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.0.6 10.8.0.5'
Wed Aug 31 15:14:35 2011 ROUTE default_gateway=192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 199.[*.*.*] MASK 255.255.255.255 192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5
I've hidden my server's IP beginning with 199 for security purposes.What I've gathered.I'm assuming that 0.0.0.0 is a kind of code for "everything," so I'm not sure how I could get this to work, but the general idea is that I need a specific IP range (172.16.*) to be resolvable on the LOCAL NETWORK (of the client) meaning it does not go through the VPN tunnel and the client can connect to 172.16.* locally.Is this possible? Routes can be executed through the command line, server "push" or client config options. Any way to get this to work while still routing other traffic through would do, really.
Additional Info: I have the server running on Debian 64-bit and the client running on Windows 7 (although Vista needs to work as well).Client/server configs can be provided if needed.
View 2 Replies
View Related
Feb 14, 2011
I only have very basic understanding on how it works.This question may have been asked so many times, and honestly I've tried so many tutorials and have read a lot of articles but it all didn't worked. I may be too stupid to have this done, or it is just the lack of knowledge.
Here it goes,I have a VPS with a host which runs OpenVZ in LA. I want to create a VPN tunnel to the VPS and tunnel all my internet traffic to the VPS. Can somebody please help me out on the step-by-step?
I was once able to configure the VPS to run OpenVPN and my client pc was able to connect to it, but the internet connection is still thru with my local connection. Did it with a tutorial too. I would also like to ask, The VPS has 512mb of RAM, I was wondering how many clients can it handle at the same time.
View 2 Replies
View Related
Jan 25, 2010
I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this:
client
dev tun
proto udp
remote openvpn.xxx.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
[Code]...
My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help:[URl].. As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file.
View 1 Replies
View Related
May 16, 2010
I an unable to connect to an openvpn connection in ubuntu karmic. I have installed openvpn , I added the user certificate, CA certificate , Private key and the conf file in the /etc/openvpn directory. Also followed the steps given here [URL]..community/OpenSSL under "Importing a Certificate into the System-Wide Certificate Authority Database" , but still when I try openvpn --config linux_client.conf I get the following error.
Mon May 10 21:58:57 2010 /usr/bin/openssl-vulnkey -q -b 2048 -m <modulus omitted>
Mon May 10 21:58:57 2010 LZO compression initialized
Mon May 10 21:58:57 2010 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 10 21:58:57 2010 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 10 21:58:57 2010 Local Options hash (VER=V4): '41690919'
[Code]...
View 5 Replies
View Related
