I can't seem to get BOINC to run on F12. I've installed it from the repositories and downloaded it from the BOINC website. I keep getting an error message "Error Retrieving current status".
View 4 Replies
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
I was about to do upgrade from 11.3 to 11.4.I was following the guide I found in opensuse's website. I was to the point where I had to disable all 11.3 repositories and add the 11.4 at that point I forgot to change my nvidia repository ( I have a g210m graphic card).
thus after the upgrade the X could not start at all. I think this was because Yast could not find the nvidia driver.
Using text mode YaSt2 I added the nvidia driver but after restart I can not see and X running. I receive an error message that the current kernel can not be loaded!!!
I also checked in command line if there is something like Sax2.. but I couldnot find anything.
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedI'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View RelatedHi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedI can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedI downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedSomething go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
when i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
Installed the ntfs configuration tool to see the ntfs windows partitions.
When I try to open it, I get:
error:
What can I do to get it functional ?
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
I was noticed the below error message when I was installing the SKYPE linux version downloaded from the official web site of SKYPE. Actually I have already installed the QT4 with the highest version correctly even I can used the QT UI for programming now. But still I faced the problem of lack of libraries afterwards.
[root@IT60 LinuxSoftware]# rpm -ivh skype*.rpm
error: Failed dependencies:
qt4-x11 >= 4.2 is needed by skype-2.1.0.47-fc10.i586
Bump: The skype is running fine by the below link. [URL]. This version needn't those QT libraries again? It's strange. In before I was using the version called "skype-2.1.0.47-fc10.i586.rpm" that also downloaded from SKYPE official website. But it's not working as I mentioned above.
While installing fedora 14 from DVD, during the installing process started half way, the error message appear on the screen " The file ed-1.4-2.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. " I have download the fedora 14 iso twice the same problem i got while installing. I install fedora 10 or 11 it install successfully.
View 7 Replies View RelatedI need to suppress the error message when the command is not working. I have given like below, command_name 2> /dev/nullBut it is not working in Red Hat Linux release 9.
View 1 Replies View RelatedMy fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI installed fedora 11 and configured xdsl(pppoe). I then performed an upgrade and installed some apps. Internet still worked before the restart.After that even though i could activate the device, i cannot view websites. I get a server not found error message. I have tried using both firefox and konqueror. Internet works in windowsIs this due to the upgrade? If so which upgrade would have caused the error?How do i resolve it
View 4 Replies View RelatedI'm trying to install Fedora 11 for the first time. The plan is to create a 10Gig partition on which i would put Fedora and leave Vista on the other partition. I have successfully done this however when i reboot to try and get to VISTA i am seeing an error message saying that BootyMgr is missing....Can you help me with this?
View 10 Replies View Relatedi have downloaded gtgz compressed files for openfoam software but when i try to decompress it an error message appear and the decompression didn't occur.
View 3 Replies View RelatedThis, in conjunction with the "If nouveau refuses to die try" instructions, has now apparently basically trashed my fresh Fedora 12 x64 installation, which I had just set up. Another couple of hours gone to waste. I installed the package that Nokia offers as leigh123linux's build instructions last rpmbuild command persistently gave errors, restarted and was left with Nouveau showing some cryptic error message and finally being presented with only the console. Then I did the "if nouveau refuses to die try" part, foolishly figuring the nVidia driver might take over. Now I am left with watching Fedora's legacy boot animation (the loading bar) and then but one USB error message, nothing else. Looks like I'll be stuck with W7 for another while.
View 3 Replies View Related
