Ubuntu Installation :: Error Message Meaning - 'unexpectedly Returned With Status 0x0100'
Dec 10, 2010
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
View 1 Replies
ADVERTISEMENT
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Feb 13, 2009
I downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
View 2 Replies
View Related
Apr 27, 2010
I have been having the worst time trying to get sametime messenger from IBM to install properly. I had it working fine for the last 6 months and yesterday I accidently updated and it all went to {1134}. I seem to have found dkms to be the source of the problem.
I get an exit 0 regardless of whether or not its install or uninstall. I have managed to get pidgin to work for now, but it is no means ideal for my purposes.
I kept getting this...
rastlosen@rastlosen-laptop:~$ sudo apt-get install sametime-connect
[sudo] password for rastlosen:
Reading package lists... Done
Building dependency tree
[Code]...
View 1 Replies
View Related
Jun 29, 2010
I am trying to install Matlab v. 7.10 on my Ubuntu machine. I was able to successfully download the necessary files. However, when I attempt to install using ' ./install ', I get the following error message:
Finished extracting ftp files.
Starting installer ...
An error status was returned by the program 'xsetup', the X Window System version of 'install'.
The following essages were written to standard error:
/home/user1/mathworks_downloads/update/install/main.sh: 178: /home/user1/mathworks_downloads/update/bin/glnxa64/xsetup: not found
Attempt to fix the problem and try again. If X is not available or 'xsetup' cannot be made to work then try the terminal version of 'install' using the command:
install* -t or INSTALL* -t
Sorry! Setup aborted . . .
I tried using the command instal* -t, as recommended by the program, but then I get this error message:
Finished extracting ftp files.
Starting installer ...
awk: cmd. line:2: BEGIN { found = 0; extra = 9; min = 24; default = 24 }
awk: cmd. line:2: ^ syntax error
awk: cmd. line:6: if (nrows < min) nrows = default
awk: cmd. line:6: ^ syntax error
awk: cmd. line:12: END { if (found == 0) print (default - extra) } .....
View 3 Replies
View Related
Mar 8, 2011
I'm using ubuntu 10.10 maverick, a package named lmodern is not required by the system, but it can't be remove or purged as follow:
Code:
yurippe@Neptune:~$ sudo apt-get autoremove
Reading package lists... Done
[code]....
View 9 Replies
View Related
Oct 31, 2010
I met some problems with installation of Matlab2010a for Unix.My edition of ubuntu is 10.04 and I downloaded an iso file of ubuntu and extract that in this document: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/
when I start to install, it showed :
------------------------------------------------------------------
An error status was returned by the program 'xsetup',the X Window System version of 'install'. The following messages were written to standard error:
/home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/install/main.sh: 178: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/bin/glnx86/xsetup: Permission denied[code].....
View 2 Replies
View Related
Apr 16, 2010
i have a problem and it's been persisting since i installes MST Core fonts.
terminal log is here:
-----------start of pasting -----
user@Ubuntu9:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
code....
View 1 Replies
View Related
May 6, 2010
I get this error whenever trying to update or install applications:
Quote:
E: sun-java6-plugin: subprocess installed post-installation script returned error exit status 2
What can I do here?
View 2 Replies
View Related
Jun 4, 2010
Everytime I attempt to install anything, in any way, I'm given the following error message:
E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2
E: wine1.2: dependency problems - leaving unconfigured
I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.
View 2 Replies
View Related
Jul 10, 2010
Code:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
View 6 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
Mar 9, 2010
it's a hot day and nothing seems to be going right. Trying to figure a way out of this one - error 127. Looks like it could be Metacity problem? There a couple of pythons that also have a problem.
Code:
(Reading database ... 145089 files and directories currently installed.)
Preparing to replace metacity-common 1:2.28.0-0ubuntu1 (using .../metacity-
[code]....
View 5 Replies
View Related
Jul 27, 2010
Everytime I install a package or use update manager I get the following message.
Code:
E: linux-image-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-generic: dependency problems - leaving unconfigured
E: linux-generic: dependency problems - leaving unconfigured
E: linux-headers-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-generic: dependency problems - leaving unconfigured
The install/upgrade appears to work but I'm getting concerned about the message continuing for so long.
View 2 Replies
View Related
Jan 16, 2011
Attempting to install Abyss Web Server on my 64 bit laptop. i have done mkdir ABYSS to create the ABYSS directoty to install the server to. Command cd ABYSS then "tar xzfm Abyss Web Server installation package" as per instructions. Result tar (child) Abyss cannot open; No such file or directory tar: (child) Error is not recoverable: exiting now tar Child returned status 2 tar: Error is not recoverable: exiting now likely .
View 5 Replies
View Related
Sep 12, 2010
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
View 9 Replies
View Related
Jun 5, 2011
I installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
View 3 Replies
View Related
Dec 8, 2010
I am preparing everything that I will be using in my fourth year project which is based on the grid computing concept. My problem is that before I installed ubuntu 10.10, I was using 9.10. And in my previous version (9.10) I was able to install condor through the synaptic package manager comfortably,but after upgrading to version 10.10 am getting the following error after installing condor:
"E:condor:subprocess installed post-installation script returned error exit status 127"
View 1 Replies
View Related
Nov 18, 2010
I have had no problems with downloading/installing updates and programs, and everything worked fine. Until memtest came along. It ran by itself (I think my dad made it the first boot option in grub), and now if I try to install any packages or programs, it will either say "Grub installation failed" or that any packages I tried to install failed. If I removed memtest, would that make it possible for me to install stuff again? Or is there a way to work around it?the main error report I get is: "E: memtest86+: subprocess installed post-removal script returned error exit status 127"
View 1 Replies
View Related
Jun 10, 2010
From the Synaptic Package Manager, I searched for HL-1440. There were two files appeared: (1) brother-lpr-drivers-laser1, and (2) brother-cups-wrapper-laser1. When I marked (1) for installation, (2) was automatically selected. After I applied the files for installation, I received this error: "E: hl1440lpr: subprocess installed post-removal script returned error exit status 126." What should I do? I am still learning Linux/Ubuntu and really don't have much experience with this.
View 2 Replies
View Related
Sep 15, 2010
I am getting "child returned status 1" error when I try to tar some downloaded files. This is what I do:
tar xvzf nagios-2.10.tar.gz (I downloaded this file)
View 1 Replies
View Related
Apr 2, 2010
what "Message too long" error returned by the function dn_expand means?
The function call I used is as follows:
dn_expand(poutput, poutput + output_space_used, *out_rr, output_qname, 255);
I assumed that the error was due to the difference between the 1st argument and 2nd argument, However, changing the difference to the accepted dns message size (512 bytes) or even to no difference at all did nothing to remove the error.
Further, I am trying to check the output after having first compressed a domain name using dn_comp into *out_rr. This function call is in order to check whether the compression is happening correctly.
View 4 Replies
View Related
Jan 26, 2011
I'm getting the following output when trying to compile my cpp project:
Code:
"/usr/bin/make" -f nbproject/Makefile-Debug.mk QMAKE= SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/walther/NetBeansProjects/CppPlay'
"/usr/bin/make" -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/cppplay
[Code].....
I've seen you guys replying to others about this collect2 error, but all of them had some kind of informative message from the compiler.
View 1 Replies
View Related
Apr 4, 2010
I am making a project learning about inheritance and polymorphism
it consists of
Account.h
Account.cpp
[code]....
View 2 Replies
View Related
Dec 20, 2009
I can't seem to get BOINC to run on F12. I've installed it from the repositories and downloaded it from the BOINC website. I keep getting an error message "Error Retrieving current status".
View 4 Replies
View Related
Mar 19, 2010
I'm tried to install bandwidthd on Ubuntu 9.10 and keep getting the following error.I have been looking around for a while and have been unsuccessful in finding a answer.
HTML Code:
$sudo apt-get install bandwidthd
Reading package lists... Done
[code]....
View 1 Replies
View Related
Sep 10, 2010
I have had some problems with installing dotnet11, 20, 30 on OpenSuse 11.3 x86_64. A every time got the same error msg:
[Code]....
I don't know what to do. Installed corefonts too, still the same. Anybody met with this problem yet?
View 3 Replies
View Related
Mar 13, 2010
Thought I could just place a hard drive with a preloaded Ubuntu install from another machine (a loaner machine) into this one; change a few drivers and be on my way. Too many errors to count. ALSA; Jack; LiveTex all cratered and I'm tired of fighting this. I've spent more than two days trying to get stuff working and if there's anything I've learned from years of experience there's a time to cut bait and run.
A clean install on the actual hardware I'm using has to be better than the hodge podge I have now.What I would like from the community is recommendations for what to do AFTER the install.
1) where can I find the most up-to-date comprehensive and exhaustive list of repositories for the Synaptic Package Manager?
2) I like to do sound and video processing. I would like to have the program applications
Qsynth, Virtual Midi Keyboard, Muse Score, Csound, GNU Denemo, and many others that either fail to start or produce no sound to work. What, besides the programs need to be loaded in order to make these work?
3) A helpful list of recommendations on what to install along with order preference. In other words 'this needs to be done before this...' on a new Ubuntu install.
In case anyone's interested: Here's a small list of some of the errors I currently have.
AlsaModularSynth - Could not open file.Qsynth1 - Failed to create the audio driver (jack) / Jack server not running.
Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Qtractor - The audio/MIDI engine could not be started. Make sure the JACK audio server (jackd) and/or the ALSA Sequencer kernel module (snd-seq-midi) are up and running and then restart the session.
apt-get install alsa-utils - Errors were encountered while processing:
texlive-latex-base-doc
E: Sub-process /usr/bin/dpkg returned an error code (1)
Jack configuration files not found; the list is endless. Plus many errors trying to get texlive to work.
View 1 Replies
View Related
Dec 1, 2010
Code:
Unpacking replacement linux-image-2.6.35-23-generic ...
dpkg-deb (subprocess): data: internal bzip2 read error: 'DATA_ERROR'
dpkg-deb: subprocess <decompress> returned error exit status 2
dpkg: error processing /var/cache/apt/archives/linux-image-2.6.35-23-generic_2.6.35-23.41_i386.deb (--unpack):
[Code].....
both update software and synaptic gave the same error? how do i install this package?
View 1 Replies
View Related
Apr 8, 2011
when i try to update using terminal and update manager i get this error
/usr/bin/dpkg: 1: Syntax error: "&" unexpected
E: Sub-process /usr/bin/dpkg returned an error code (2)
View 7 Replies
View Related
