General :: BIND9 For Local Web Server?
Jun 10, 2011
I have a web server on my local network with a couple domains facing the internet. When I visit these domains from within the network I'm directed to my routers configuration page due to hairpin NAT.
So I installed BIND9 on the server and set up my forwarders to Google DNS to act as a Caching Nameserver. Then I set my routers DNS primary and secondary nameservers to the IP of the local BIND server. Everything is working great.
Now I need help configuring BIND so that the domains hosted on the web server within the network are routed to the web server and not the routers configuration page.
View 1 Replies
ADVERTISEMENT
Jul 10, 2010
especially to ubuntu server 8.04 because it doesnt use a GUI. Now my question is on how to insert IP address in configuring DNS server using bind9. Actually i'm using this guideBut i m not sure on how to insert IP addresses on the primary master and secondary master. Should I insert the Ip address that i found when i type ifconfig ? or Should I assign a new IP address.I have set up a webserver, DNS server, File server and mail server on a virtual box. For now, at first, im working with the DNS server or should I work with the web server first?what should I do?
View 1 Replies
View Related
Jul 9, 2010
I've tried reading several tutorials on setting up a domain name with bind9, but I've never managed to get one working.
View 7 Replies
View Related
Jun 10, 2011
I have worked with servers before now, but not DNS nameservers and I would like help setting up Bind9 on my Ubuntu 11.04 Server.
View 7 Replies
View Related
Sep 20, 2010
The thing is, I've created a new local zone here (called "local.lan"), and, aparently, it is working fine, and DHCP3-SERVER is updating DNS info through the controls.But sometimes I get some strange answers from the server, like when I do the "arp" command in one of the clients, and get the server's hostname "mixed" with it's own reverse, like this: "dns.local.lan.2.168. | ether | 00:02:1e:f5:61:74 | C | eth0". Other thing is that sometimes my DNS don't update when a computer "enters" the lan. In the /var/log/syslog the DHCPOFFER appears, but the information about the DNS update isn't there.So, I would like to show you my named.conf file and my local zone db file, and get some feedback from you (what would you change... what is wrong...).
# ------------------- #
* named.conf:
# ------------------- #
[code]....
View 17 Replies
View Related
Feb 24, 2011
I have my bind9 DNS server running on Ubuntu with logging on. What's bothering me is that I have log full of localhost queries instead of from IP of the computer which actually asked.DNS queries log:/var/log/named.queries.log
Code:
24-Feb-2011 16:01:19.413 client 127.0.0.1#38022: query: clients4.google.com IN A + (127.0.0.1)
[code]....
View 6 Replies
View Related
Jul 24, 2011
I'm running bind9 on Debian 6. I have a primary domain, 44kg.net, fully configured and working dynamically (the server also runs DHCPd and updates the DNS records properly).
[Code]....
To access my externally-facing website, which has a blog and a forum which are keyed to the external domain, I set up the domains in bind so they would resolve to the server's internal IP. This worked great for a few months, then inexplicably ceased working. I didn't touch anything, but it coincided with our router dropping its VLANs. I've moved the server to a different location and it's still not working properly. Whenever I try to lookup the external domains, I get SERVFAILs. This is annoying because the internal domain is fully working and I copied the basic settings.
[Code]....
View 6 Replies
View Related
Jun 18, 2011
I followed blindly this how to : [URl].. out of laziness and then for some reason bind9 didn't want to start. So I tried to apt-get remove it, but when I re-install it, it failed because
Code:
chgrp: cannot access `/etc/bind/named.conf*': No such file or directory
so I assume the chrooting stuff I did is in the way, but I know very little about chrooting and permissions ... how can I undo the following things I did :
Code:
/etc/init.d/bind9 stop
[Code]...
View 4 Replies
View Related
Oct 31, 2010
Location and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.
View 1 Replies
View Related
Mar 4, 2011
I'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
View 1 Replies
View Related
Sep 8, 2010
Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
[Code]...
View 3 Replies
View Related
Apr 19, 2011
Is leading whitespace significant in bind9 config files? This reverse lookup file (/var/chroot/bind9/etc/bind/zones/rev.168.168.192.in-addr.arpa) did not work; /var/log/messages had "zone 168.168.192.in-addr.arpa/IN: has no NS records".Inserting 3 spaces before IN in the NS line fixed it:
Code:
; IP Address-to-Host DNS Pointers for the 192.168.168.0 subnet
@ IN SOA CW8vDS.localdomain. hostmaster.localdomain. (
2011041901 ; serial
8H ; refresh
[code]...
Reading the man pages and netsearching, I did not find anything about indentation requirements except for "This is usually indented for readability, but the indents are required syntactically" here.Although the above file works, named-checkconf reports an error in it:
Code:
root@CW8vDS:/var/chroot/bind9/etc/bind/zones# named-checkconf rev.168.168.192.in-addr.arpa
rev.168.168.192.in-addr.arpa:1: syntax error near ';'
but named initialisation does not log any errors or warnings in /var/log/messages when processing this file except "/etc/bind/zones/rev.168.168.192.in-addr.arpa:2: no TTL specified; using SOA MINTTL instead".
View 10 Replies
View Related
Feb 28, 2010
I have a Ubuntu server running in my house.Server name UshaMain PC name HomeLaptop 1 Named BooLaptop 2 Names Bobevery one is running Ubuntu 9.10The server is running Bind9 and Samba and is working from any other PC i can type ping usha and it will give me teh ip address of the server.This has been working for 4 months now.I just installed PostFix and nowthe only PC that is working with i ping the name USHA "server name " Is the server.The other three pc come back with the IP address of the domain for USHA.I have removed the Postfix from the server but the DNS is still not working for the other pc on the network.Ho do I get Bind working again form the rest of the PC.
View 10 Replies
View Related
Sep 25, 2010
I have a white slate centos 5.5 installation on a virtual box at Media Temple (one of their new VE servers). I am trying to create a development environment where I can have Bind9 serve up one set of zone files to me and other developers on the internal network and another set of zone files to external requests (ie... using the views feature). I would like to be able to develop for sites for which the dns is not yet pointed at my server. The network is created by having the VE server be an OpenVPN server, and connecting my client box to the server (my mac - 10.8.0.6 / my ve server 10.8.0.1).
I have the connections working fine, I have also been able to route all network traffic from my mac through the vpn to the server. For some reason, I cannot get the DNS server on the ve server to serve me an internal view zone file. When my vpn is on, I cannot ping or navigate to any web pages from my mac. I think this is because my ve server is not setup as a dhcp server and the ip tables are not setup to allow all internal requests to use the server to go get web pages.
I cannot view-ping anything else from my mac/client when on the vpn, I can successfully ping any website my ve is authoritative for. This tells me that my ping is obviously going over the vpn, and thus an internal request, but the external zone file is still served up. The following is my named config.
acl "lan_hosts" {
10.8.0.0/24;
127.0.0.1;
};
[code]....
View 3 Replies
View Related
Aug 3, 2010
I'm trying to figure out on why when I do a: service bind9 status This doesnt display anything in my command. Should be: Status of Bind9 server: bind9 is running. But this doesnt display at all.
View 8 Replies
View Related
Feb 28, 2010
I've been doing XHTML/CSS for the past several weeks, and started learning PHP last week (all on windows). Learned how to set up IIS server, mysql and php to be able to do all the work locally. Now, I've got Ubuntu 9.04 on my laptop and want to continue working with the book I have on it, so I can do some of the work when I'm away from home as well. Questions I have are:
1. How to set a server up?
2. SQL? (mysql?)
3. php? How do I check if I already have any of those installed on my system, and if not how to set them up?
4. where would the root system be for the server if I have it, or if not, where will it be?
5. do I refer to it as "localhost" here aswell i.e. [URL]
View 3 Replies
View Related
Jul 2, 2010
This may or may not be an easy question, as I'm somewhat uninformed in the networking side of computer science. I own a rented server with a static ip address. Is there a way that I can forward requests from it to my computer to setup a LAN network of sorts over the internet. Specifically, there is a program I would like to use that requires LAN (you enter an IP to connect to). Is it possible to setup my server in a way that users could connect to my server's ip, which would then forward it to my home computer (I'm fine with setting up my home computer with programs that would allow this) that could host?
View 2 Replies
View Related
Nov 19, 2010
I have a file 'my_file.txt' stored on 'myserver1.col.edu' Now, I am using a different server 'myserver2.col.edu' to do some work and I want to access 'my_file.txt' on 'myserver1.col.edu' to read (possibly edit) WITHOUT physically copying the entire file across. Is there a way to do this - perhaps through ssh?
View 2 Replies
View Related
Dec 30, 2010
I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?
View 1 Replies
View Related
Aug 23, 2011
I use a PHP IDE that has no built-in ability to upload a project to a site. So, I'm looking for common easy to use tool for Linux that would able to upload modified documents to the server instead of uploading of the whole site. I also accept shell scripts that would be able to do this.
View 1 Replies
View Related
Aug 8, 2011
i am new member for this forum, i am doing copy data from virtualbox A centos machine to virtualbox B centos machine.first step i use mysqldump database xxx > xxx.sqlthan send to B machine by scp xxx.sql @B machine IP /root.but come to third step, the xxx.sql need import to B machine mysql database,the error occur again:# can't connect to local mysql server through socket 'opt/lampp/lampp/mysql/mysql.socki really dun know how to solve it, use almost 3 hour cannot do solve it,but i use win scp check the folder, i found mysql.sock is no at the /opt/lampp/lampp/mysql/mysql.sock but at/opt/lampp/var/mysql/mysql.socpi dun know how to continue it, i hope those centos user help me to overcomethe issue. thank you very much!centos version 5.5, xampp version 1.4
View 3 Replies
View Related
Jan 7, 2010
I have a client.conf in /etc/cups that points to a CUPS server. I don't have u/p access to this server. I also want to print to a local printer (USB), but I can't set it up - ALL attempts bring me back to the CUPS server password prompt. Is there some line I can add to the client.conf to allow me to use a local printer?
View 4 Replies
View Related
Jun 2, 2011
how to configure dhcp server in a local lan network
View 2 Replies
View Related
Jun 18, 2010
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
following my.cnf setting why this error is coming
#BEGIN CONFIG INFO
#DESCR: 4GB RAM, InnoDB only, ACID, few connections, heavy queries
#TYPE: SYSTEM
#END CONFIG INFO
[Code].....
View 8 Replies
View Related
Jan 5, 2010
I have been given a task to install samba server from my local PC in an another PC which is a linux server.The linux server is in my own comapny and i have been given its ip address and root login password.I dont know how to install that samba server from my own PC.
View 9 Replies
View Related
Jan 26, 2011
I have a problem while copying files from a remote computer to my local one using the scp command. I am sure that I am using it correctly, please check it below:
---
blah@blah.com:~/g4work> scp blah2@blah2.com:IndirectMethod_Spher...s/H_1.mac.root .
---
What I get in return (instead of the statement saying 100% of file copied) is:
---
On this machine the G4SYSTEM=Linux-g++
---
The interesting point is that the above returned statement is one of the Environment variables set on both the machines that are necessary to work with a toolkit called Geant4. Here is what I get when I type 'printenv | grep G4' just to show you (note the statement in bold):
---
G4LEVELGAMMADATA=/home/blah/geant4/geant4.9.3.p02/data/PhotonEvaporation2.0
G4INSTALL=/home/blah/geant4/geant4.9.3.p02
G4LEDATA=/home/blah/geant4/geant4.9.3.p02/data/G4EMLOW6.9
G4NEUTRONHPDATA=/home/blah/geant4/geant4.9.3.p02/data/G4NDL3.13
G4VIS_BUILD_OPENGLX_DRIVER=1
G4RADIOACTIVEDATA=/home/blah/geant4/geant4.9.3.p02/data/RadioactiveDecay3.2
G4ABLADATA=/home/blah/geant4/geant4.9.3.p02/data/G4ABLA3.0
G4LIB=/home/blah/geant4/geant4.9.3.p02/lib
G4VIS_BUILD_RAYTRACERX_DRIVER=1
G4LIB_BUILD_SHARED=1
G4VIS_USE_OPENGLX=1
G4UI_USE_TCSH=1
G4VIS_USE_RAYTRACERX=1
G4REALSURFACEDATA=/home/blah/geant4/geant4.9.3.p02/data/RealSurface1.0
G4SYSTEM=Linux-g++
G4WORKDIR=/home/blah/g4work
---
The other thing that I would like to mention is that these Geant4 Env. Variables are loaded each time a new (bash) shell is started as a result of the bash login script.
View 6 Replies
View Related
Oct 26, 2010
I recently purchased a linux VPS from [URL] just to learn and play around with. I currently ssh into the machine via Putty from various Windows boxes. Is there anyway to throw some mp3s on the remote server and then have them play locally? Server is currently running Ubuntu Server 10.04.1.
View 4 Replies
View Related
Nov 21, 2010
I have my local computer, and server.
I log into server, and mount my local computer (folder) via sshfs.
Create .rar backup archive direct to sshfs remote folder.
After copy, close my ssh sessions.
And use my streamer to backup files stored by server.
I'm wondering, is there any way to share streamer /dev/st0 via ssh session ?
how can i start backup direct to (remote) -> root@server/dev/st0
View 2 Replies
View Related
Mar 30, 2010
I just configured vhost server in my linux server. When trying to access the open source (SugarCRM) application running on it, its giving me the error message that i am not connected to internet. I have restarted apache by no luck.
View 1 Replies
View Related
Mar 7, 2010
my mail server [URL] is hosted abc@[URL] is a pop id below are alias:
user1@[URL]
user2@[URL]
user3@[URL]
fetchmail is configured to download all mail for alias email id on local linux server and distribute to local users.
fetchmailrc config:
[Code]....
everything works fine except bcc copy is not getting delivered to email alias (at local linux server). It is delivered to local postmaster account :abc@[URL] (in Linux server) I have tried all envelope option in fetchmailrc file, but it did not work.
View 1 Replies
View Related
