General :: Add Keys To The Sensor Nodes?

Feb 5, 2010

i want to add keys to the sensor nodes. Hence i want to know whether there is any parameter for key storage in senor nodes

View 1 Replies


ADVERTISEMENT

General :: F3 - F5 Keys Incorrectly Behaving As Audio Keys / Remap Them To Original Meaning?

Apr 17, 2010

I don't know if this is a configuration issue or a hardware issue, but I have a Kinesis Advantage USB keyboard and for some reason the F3-F5 keys aren't responding as they used to. They don't respond to anything and, when I tried using F5 on Emacs, it said <XF86AudioNext> is undefined, so I guess it's a weird mapping problem.

Any idea how I could remap them to the original meaning?

View 2 Replies View Related

General :: Re-mapping Non-standard Keys To Modifier Keys?

Apr 7, 2011

I'm running Debian (Squeeze) and I have a toshiba portege m700. It has five buttons on the front just under the screen, which are the only ones accessible when you flip the screen over into tablet mode. One of them is for rotating the screen, and another is for switching to external display. I want to remap the remaining three to control, alt and super so that I can use shortcuts with the stylusThe problem is, when I used showkey to find out the key codes, I found out that each button generates more than one key code:Button 1:

key 126 press >> super_r, although this is distinct from the actual super key (125)
key 7 press >> 6
key 7 release
key 126 release

View 4 Replies View Related

General :: APTEEN Protocol For Wireless Sensor Network?

Feb 2, 2011

I've been searching and browsing about the algorithm of APTEEN Protocol for my sensor netwok's project. but what I'm still don't have enough information about its algorithm. Do somebody know the information about APTEEN protocol or links ?

View 1 Replies View Related

General :: Make 'hddtemp' Sensor To Appear In Gnome Sensors?

Jun 8, 2011

I have hddtemp installed and I get outputs of my HDD temperature in Terminal, but I can't see a the HDD temp sensor in the Preferences menu of my Sensors Applet.

P.S. I have my /etc/default/hddtemp edited to:

Code:
# [automatically edited by postinst, do not change line format or set it to
# anything but false or true ]
RUN_DAEMON="true"
# List of devices you want to use with hddtemp. If none specified,
# hddtemp will probe standard devices.
DISKS="/dev/sda"

My Drive is a 7200.11 Barracuda split in /dev/sda1 and /dev/sda5, I use LinuxMint 10 64-bit w/ Gnome.

EDIT: I just had to reboot after I changed to RUN_DAEMON="true",

View 1 Replies View Related

General :: Set Anchor Nodes In NS2?

Oct 22, 2010

How to set the anchor node in NS2? How to define the channel propagation model as Log Normal Shadowing instead of two ray ground reflection model in NS2?

View 2 Replies View Related

General :: Implementing Wireless Sensor Network In Omnet++ 4.1 Simulation Tool?

Oct 2, 2010

i m trying to implement wireless sensor network in omnet++ 4.1 simulation tool but that tool is not supported.so i m installing framework mixim 1.2 in omnet++ that support wireless and mobility feature.now i have problem that how to create sensor network in omnet++4.1 using mixim 1.2?if any body

View 2 Replies View Related

General :: Get Certificate For Web Server And Cluster Nodes?

Mar 10, 2010

I have two Web server (RHEL 5.3) as cluster. i want to get a certificate for website. do i need to get two certificates for a website?

View 2 Replies View Related

General :: Write Cpu Affinity Code To Map 8 Nodes To 8-cores Computer?

Jan 24, 2011

I have a 8 core computer, which has 8 logical processor in total. I want to create 8 process(nodes). Each node is mapped to each logical processor. The order is code...

I wrote the code as below, could you please see whether it is correct? code...

View 3 Replies View Related

General :: Dynamically Create/delete Device Nodes By Driver?

Apr 15, 2010

I'm a starter here in linux, I have written a driver code and in that, I register my character devices by passing 0 for the major number.

To set up I used to use mknod command from terminal to create node,

Is there any method to create node dynamically from driver code during initialization and delete them at cleanup time?

View 1 Replies View Related

General :: Running Tcl For Mobile Ipv6 / Creating Nodes And Setting Their Positions In Tcl?

Dec 1, 2010

i have installed ns2.33 and added mobiwan , i tried to run tcl script after modifyng simple tcl which i have got along mobiwan patch, but the problem is after creating some nodes and setting their positions in the tcl, according to my topology, i tried to run , but the command i have included in tcl , which sets the positions for mobile nodes, has no effect , which means that the positions of the mobile nodes is already fixed , trough tcl i am not able to change , and also each time when i run nam , different positions mobile nodes taking, and also the mobile node is not moving , even if i have given mobility to it, at different time , i have given different destinations.this is part of tcl in which i have set positions mobile node.

Code:
set cn_ [create-router 0.0.0]
set router_ [create-router 1.0.0]
set bs1_ [create-base-station 1.1.0 1.0.0 200 200 0]
set bs2_ [create-base-station 1.2.0 1.1.0 200 600 0]
set bs3_ [create-base-station 1.3.0 1.2.0 600 200 0]
code....

View 4 Replies View Related

Ubuntu :: Accessibility Equivalent For Sticky Keys And Mouse Keys?

Jun 27, 2011

Just wondering if Ubuntu has an Accessibility equivalent for sticky keys and mouse keys.

View 1 Replies View Related

Ubuntu :: Thermal Sensor On Cpu

May 14, 2011

I just upgraded to maverick meerkat two days ago and each time I boot I get a problem about the thermal sensor on my cpu. Apparently from this link below it has happened to others and supposedly a bug fix was going to be released, but I haven't seen one. Is there anything I can do about this? I have a amd phenom x4. [URL]

View 1 Replies View Related

Software :: ACPI Not Seeing Sensor Data

Jul 22, 2010

I'm trying to configure the critical trip points on a bunch of servers so they will shut down automatically if they get too hot. Problem is, acpi doesn't seem to see any of the sensor data and /proc/acpi/thermal_zone is empty. Oddly enough, when I run "sensors," I get info back. Also, i2c and acpi appears to be installed according to modprobe and dpkg.

Here are the relevant outputs:
plasmo:/proc/acpi/thermal_zone# sensors
lm78-i2c-0-2d
Adapter: SMBus I801 adapter at 0400
VCore 1: +2.34 V (min = +0.00 V, max = +3.49 V)
VCore 2: +3.68 V (min = +2.96 V, max = +0.08 V)
+3.3V: +3.30 V (min = +1.54 V, max = +3.42 V)
+5V: +5.51 V (min = +5.51 V, max = +4.30 V)
+12V: +9.73 V (min = +10.94 V, max = +2.13 V)
-12V: -10.85 V (min = -11.57 V, max = -5.17 V)
-5V: -3.83 V (min = -2.96 V, max = -4.50 V) .....

View 1 Replies View Related

Debian Configuration :: Jessie Missing Fan Control / Sensor

Apr 27, 2016

My laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work

sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  (crit = +108.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +55.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:         +55.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:         +54.0°C  (high = +87.0°C, crit = +105.0°C)

[Code] ....

I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax

This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.

View 9 Replies View Related

Fedora :: Gnome Sensor Applet (3 CPUs Shown)

Apr 1, 2011

I've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.

View 5 Replies View Related

OpenSUSE Hardware :: Jerky Mouse After Sensor Scan?

Oct 10, 2010

I just did a scan with lm_sensors, rebooted to apply the settings. Did nothing different than I have in the past except including the GPU sensor. Now the mouse pointer and the cursor seem a little jerky. Occasionally they don't immediately respond, less than a second but noticeable. I also had to adjust the mouse speed after applying the settings. Anyone know what's up here? I have a GEForce 8400 card.

View 2 Replies View Related

Ubuntu :: Unable To Fetch Sensor Information Using This Procedure?

May 26, 2010

On a new fresh install of Lucid I am unable to fetch sensor information using this procedure [URL]... LM sensors et al are installed, but after running the sensors-detect command (twice), typing sensors into Terminal gives me "no sensors found". This same system (with no hardware or bios changes) displayed all the sensors OK in Jaunty. etc/modules looks like this. Am I supposed to uncomment # Chip drivers w83627ehf?

QUOTE
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Generated by sensors-detect on Wed May 26 14:38:00 2010
# Chip drivers

[Code]...

View 2 Replies View Related

Ubuntu :: Display Info On CPU Temp & Other Sensor Information?

Dec 17, 2010

Is there a Linux application which can display motherboard and CPU sensor information and which also satisfies one other, absolutely key, requirement: It should be directly usable, after installation, by a reasonably intelligent computer application user. That is, it does NOT require deep internal knowledge of specific hardware or obscure system software customisation. It does not require hours, days or weeks of reading of documentation which is so crafted as to be the antithesis of end-user guides. It must be capable of being invoked easily.

This eliminates all software that the Ubuntu Software Centre lists when performing a search with the term 'sensors', with the exception of xsensors. All other software listed with this search installs without error but is then totally invisible to me - not even listed under 'installed software'. I am aware a key requirement to be a Linux developer is an advanced commitment to play games of 'I bet I can make my software harder to use than yours', but I'm too old for that now. I don't have a need to prove how technically capable I am.

Xsensors installs and tells me where it can be found, but is inadequate as it lists only 2 CPU core temperature readings. It does not give me any indication of motherboard temperature or fan speeds. That's all I want to do - get a simple snapshot of sensor values without having to resort to entering BIOS setup. It's the sort of information that is so easily available using the ASUS-supplied 'asus-probe' software under Windows. Is it possible, given the key requirement previously mentioned?

View 9 Replies View Related

Ubuntu :: Krita Not Using Pressure Sensor With Wacom Bamboo

May 10, 2011

I've installed Krita in Kubuntu 11.04 and while GIMP works fine with the Wacom tablet (so Xorg is configured properly), Krita responds to the tablet pen as if it was a mouse (so on/off, no pressure sensitivity at all).

I've found old topics about bugs in Qt 4.6 but since we are now using 4.7, I assume those have been fixed?

View 1 Replies View Related

Hardware :: No Thermal Sensor Or Fan Diags On Sun X4100 M2 BladeServer

Jan 30, 2010

As the subject state, I am running linux on a Sun Fire X4100 M2 BladeServer. The distro is ubuntu 8.10, kernel version 2.6.24 patchlevel 24. I need to monitor the thermal and fan statistics on this server, but there are no stat files in /proc/acpi/thermal_zone or /proc/acpi/fan. I have tried loading all of the lm modules (and all other available ones in the drivers/hwmon section of the kernel modules) provided with no avail.

View 1 Replies View Related

Networking :: Getting A Topology Generator Sotware For Sensor Networks?

Jan 18, 2010

i need a topology generator in which all the parameters for the topology should be got and the network should be generated for sensor networks

View 2 Replies View Related

Fedora :: What Is SNet Sensor Mgmt Running On Port 10000

Feb 9, 2011

I searched a bit on the 'snet-sensor-mgmt' but I couldn't make sense of what it is for. Why is it running? and does it have to be on port 10000? I am thinking of installing webmin, but that port is taken. Fedora 14.

View 4 Replies View Related

Fedora X86/64bit :: Startup Freeze - Unreliable CPM Thermal Sensor

May 13, 2011

My F-14 x64 bootup stalls with this message: "K10 temp ... unreliable CPU thermal sensor: monitoring disabled". I'm unable to find an explanation/basis for this message. I can boot from CD#1 and chroot onto the disk - near as I can tell, all the data is there. Might this be the result of a corrupt boot up sequence file and, if so, which one(s)?

View 3 Replies View Related

Ubuntu :: /usr/sbin/pwmconfig: There Are No Pwm-capable Sensor Modules Installed

Feb 20, 2010

Im trying to setup pwm config on this computer so that the fans wont come on to loud. Motherboard is DFI lanparty JR p45-t2rs. there is pwm hardware, as i have used pwm config in arch on the same computer. any pointers you can give me to get pwm control working on this pc? edit: during sensors detect. im told that the it87 module is needed. but i cannot load it:

mark@torrentslave:~$ sudo modprobe it87
FATAL: Error inserting it87 (/lib/modules/2.6.31-17-server/kernel/drivers/hwmon/it87.ko): Device or resource busy
mark@torrentslave:~$

View 1 Replies View Related

Ubuntu :: Acer Laptop Overheating - Temp Sensor 109C

Jun 1, 2010

My laptop is an Acer Travelmate 7530G, it runs an AMC Athlon X2 64 2.1Ghz CPU, 2GB RAM and an ATI Radeon HD3470 Hybrid X2 512MB. In Ubuntu (all versions) the temperature sensor goes up to around 99C and apparently sometimes reaches up to 109C ! The laptop itself gets very hot (as one would imagine), and the fan is on highest constantly. But in windows this problem is not present.

View 7 Replies View Related

Debian :: Sendmail On Nodes ?

Jun 17, 2010

I ise debian lenny on both server and nodes. Nodes are in sence of drbl drbl project.

So, my sendmail on server works well but on nodes in syslog i see:

Code:

Configuration of sendmail on server and nodes is same and it is:

Code:

View 2 Replies View Related

Programming :: Traverse Through The XML Nodes?

Jul 12, 2011

I have a xml file and I read it within a php file with XML dom. This is the node structure of my xml file :

<Root><name></name>
<surname></surname>
<ID></ID>
<department></department>

[code]....

In the comment line, I've got the parent node of the current node. Parent node is "User" node. I would like to obtain the children of this parent node, say "name","surname " etc. How can I do this? Is there any function such as : "$parent_nodes->bringChildren('name')".

View 1 Replies View Related

OpenSUSE Hardware :: Fix Unreliable CPU Thermal Sensor ; Monitoring Disabled Error?

Sep 9, 2011

I get this from console...

Code:
dmesg | grep thermal[5.927029] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled

View 2 Replies View Related

Ubuntu Installation :: Conky Not Read Temperature Sensor After Upgrade To Natty

May 1, 2011

I recently upgraded to Natty and now Conky is no longer reading the temperature sensor. It permanently displays 0' Celcius. The temperature was displaying correctly before the upgrade and the mobo is brand-new.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved