General :: Make 'hddtemp' Sensor To Appear In Gnome Sensors?
Jun 8, 2011
I have hddtemp installed and I get outputs of my HDD temperature in Terminal, but I can't see a the HDD temp sensor in the Preferences menu of my Sensors Applet.
P.S. I have my /etc/default/hddtemp edited to:
Code:
# [automatically edited by postinst, do not change line format or set it to
# anything but false or true ]
RUN_DAEMON="true"
# List of devices you want to use with hddtemp. If none specified,
# hddtemp will probe standard devices.
DISKS="/dev/sda"
My Drive is a 7200.11 Barracuda split in /dev/sda1 and /dev/sda5, I use LinuxMint 10 64-bit w/ Gnome.
EDIT: I just had to reboot after I changed to RUN_DAEMON="true",
View 1 Replies
ADVERTISEMENT
Apr 1, 2011
I've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.
View 5 Replies
View Related
Jun 3, 2010
I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.
I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times
View 1 Replies
View Related
Mar 3, 2011
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
View 3 Replies
View Related
Jun 21, 2010
I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
[code]...
View 3 Replies
View Related
Aug 26, 2010
on fedora and ubuntu im using hdd temp but on suse 11.3 i can not install itzypper install hddtempi get this
PHP Code:
Loading repository data...
Reading installed packages...
[code]....
View 8 Replies
View Related
Feb 5, 2010
i want to add keys to the sensor nodes. Hence i want to know whether there is any parameter for key storage in senor nodes
View 1 Replies
View Related
Feb 2, 2011
I've been searching and browsing about the algorithm of APTEEN Protocol for my sensor netwok's project. but what I'm still don't have enough information about its algorithm. Do somebody know the information about APTEEN protocol or links ?
View 1 Replies
View Related
Jun 2, 2011
Either the documentation on this -- or the eyes and brain I'm reading it with -- is/are clear as mud.This has been busted since I tried to install it a few months ago. <....>In short, what entries and parameters (and in what syntax) do I need to park in: /etc/sysconfig/hddtemp that the silly thing won't completely ignore?
View 14 Replies
View Related
Mar 17, 2010
I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.
View 9 Replies
View Related
Oct 2, 2010
i m trying to implement wireless sensor network in omnet++ 4.1 simulation tool but that tool is not supported.so i m installing framework mixim 1.2 in omnet++ that support wireless and mobility feature.now i have problem that how to create sensor network in omnet++4.1 using mixim 1.2?if any body
View 2 Replies
View Related
Jun 27, 2010
I have a Dell Precision M4500, Intel Core i5 CPU, running Linux (Ubuntu Lucid), and would like to keep an eye on CPU temperature. I've tried lm-sensors: sensors-detect didn't find any sensors; following its hint ("This is relatively common on laptops, where thermal management is handled by ACPI rather than the OS.") I tried acpi -V but got nothing thermal. The Gnome panel applet "Hardware Sensors Monitor" reports on GPU temperature but nothing else.
View 3 Replies
View Related
Oct 2, 2010
Using a default terminal and bash, there is no functionality to search the standard output of commands.
One can gain such functionality using other tools, like emacs shell or screen, but I am wondering why such a useful feature is missing, I do remember a simple C-F used to work in terminals.
Is there a way to make the Gnome terminal app support output search? or is there a better terminal app that support searching output natively?
View 5 Replies
View Related
Jul 16, 2010
when i start an application it usually places it in the upper left corner or lower right corner or something like that.. but never in the middle of my screen. How can I configure GNOME to always open applications in the middle of my screen..?
View 3 Replies
View Related
Jun 20, 2011
I just installed Gnome Shell in Ubuntu 11.04 through UGR Linux and everything works fine! The only problem is that I cannot run make and make install. I get the following errors:
Code:
alexandros@Autobot:~/gnome-shell/source/gnome-shell-extensions$ make && make install
Making all in extensions
make[1]: Entering directory `/home/alexandros/gnome-shell/source/gnome-shell-extensions/extensions'[code]........
View 3 Replies
View Related
Oct 21, 2010
I am attempting to write a program using Festival as the TTS output. It is a weather system, so
1) takes raw data from sensors on the input.
2) converts it into a text message
3) let festival take the message and turn it into audio that I can then route out to the telephone system.
Here is my main block of code using festival:
[Code]...
I imagine some of my problem is being a C/C++ newbie, but is there anybody out there able to give me some hints? Maybe there is a different or better way to fork that process. My plan is to keep updating the buffer whose pointer is passed to the function process() with my serial port processing program in the main loop. I can protect it with a mutex during the festival_say_text() function, but otherwise it will be accessible.
View 1 Replies
View Related
Jan 8, 2011
Howto install busybox with Gnome on a USB memory stick and make it bootable?
[URL]
View 2 Replies
View Related
Apr 21, 2010
I want to insert a CD-ROM and have it automatically be mounted to someplace like /media/cdrom and create an icon on the Gnome desktop, while logged in as a non-root user under SLED 11.
How can I accomplish this?
View 1 Replies
View Related
Jan 27, 2010
How to make my GNOME desktop auto recognize the NTFS partition of the USB drive.
On command line I can do the following perfectly:
Code:
which results
Code:
All files permission on the drive is 777. I can read, I can write, do whatever I want.
But in GNOME Desktop environment, when the USB drive is plugged-in, the partition is auto-mounted with other options:
Code:
All files permission on the drive is now 555. I can't write to it anymore. I saw a post earlier having similar mount result, but this one is USB drive though.
So how to configure GDE mount automatically with my intended mount options?
View 9 Replies
View Related
Jan 10, 2011
I use gnome-mplayer 1.0.0 and Totem Movie Player 2.30.2 to view videos Both read subtitles well from srt files. But both are not able to read {a6} command in the srt files.
NOTE:- {a6} command serves the purpose of putting the subtitles on top of the screen, making it possible for subbers to display lyrics/additional footnotes on top, while at the same time, having the dialogues to show in their usual position.
Is there are way to force either of them to read the special commands properly?
View 9 Replies
View Related
May 14, 2011
I just upgraded to maverick meerkat two days ago and each time I boot I get a problem about the thermal sensor on my cpu. Apparently from this link below it has happened to others and supposedly a bug fix was going to be released, but I haven't seen one. Is there anything I can do about this? I have a amd phenom x4. [URL]
View 1 Replies
View Related
Jul 22, 2010
I'm trying to configure the critical trip points on a bunch of servers so they will shut down automatically if they get too hot. Problem is, acpi doesn't seem to see any of the sensor data and /proc/acpi/thermal_zone is empty. Oddly enough, when I run "sensors," I get info back. Also, i2c and acpi appears to be installed according to modprobe and dpkg.
Here are the relevant outputs:
plasmo:/proc/acpi/thermal_zone# sensors
lm78-i2c-0-2d
Adapter: SMBus I801 adapter at 0400
VCore 1: +2.34 V (min = +0.00 V, max = +3.49 V)
VCore 2: +3.68 V (min = +2.96 V, max = +0.08 V)
+3.3V: +3.30 V (min = +1.54 V, max = +3.42 V)
+5V: +5.51 V (min = +5.51 V, max = +4.30 V)
+12V: +9.73 V (min = +10.94 V, max = +2.13 V)
-12V: -10.85 V (min = -11.57 V, max = -5.17 V)
-5V: -3.83 V (min = -2.96 V, max = -4.50 V) .....
View 1 Replies
View Related
Apr 27, 2016
My laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work
sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1:    +55.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 0:     +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 1:     +54.0°C (high = +87.0°C, crit = +105.0°C)
[Code] ....
I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax
This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.
View 9 Replies
View Related
Oct 10, 2010
I just did a scan with lm_sensors, rebooted to apply the settings. Did nothing different than I have in the past except including the GPU sensor. Now the mouse pointer and the cursor seem a little jerky. Occasionally they don't immediately respond, less than a second but noticeable. I also had to adjust the mouse speed after applying the settings. Anyone know what's up here? I have a GEForce 8400 card.
View 2 Replies
View Related
May 26, 2010
On a new fresh install of Lucid I am unable to fetch sensor information using this procedure [URL]... LM sensors et al are installed, but after running the sensors-detect command (twice), typing sensors into Terminal gives me "no sensors found". This same system (with no hardware or bios changes) displayed all the sensors OK in Jaunty. etc/modules looks like this. Am I supposed to uncomment # Chip drivers w83627ehf?
QUOTE
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Generated by sensors-detect on Wed May 26 14:38:00 2010
# Chip drivers
[Code]...
View 2 Replies
View Related
Dec 17, 2010
Is there a Linux application which can display motherboard and CPU sensor information and which also satisfies one other, absolutely key, requirement: It should be directly usable, after installation, by a reasonably intelligent computer application user. That is, it does NOT require deep internal knowledge of specific hardware or obscure system software customisation. It does not require hours, days or weeks of reading of documentation which is so crafted as to be the antithesis of end-user guides. It must be capable of being invoked easily.
This eliminates all software that the Ubuntu Software Centre lists when performing a search with the term 'sensors', with the exception of xsensors. All other software listed with this search installs without error but is then totally invisible to me - not even listed under 'installed software'. I am aware a key requirement to be a Linux developer is an advanced commitment to play games of 'I bet I can make my software harder to use than yours', but I'm too old for that now. I don't have a need to prove how technically capable I am.
Xsensors installs and tells me where it can be found, but is inadequate as it lists only 2 CPU core temperature readings. It does not give me any indication of motherboard temperature or fan speeds. That's all I want to do - get a simple snapshot of sensor values without having to resort to entering BIOS setup. It's the sort of information that is so easily available using the ASUS-supplied 'asus-probe' software under Windows. Is it possible, given the key requirement previously mentioned?
View 9 Replies
View Related
May 10, 2011
I've installed Krita in Kubuntu 11.04 and while GIMP works fine with the Wacom tablet (so Xorg is configured properly), Krita responds to the tablet pen as if it was a mouse (so on/off, no pressure sensitivity at all).
I've found old topics about bugs in Qt 4.6 but since we are now using 4.7, I assume those have been fixed?
View 1 Replies
View Related
Jan 30, 2010
As the subject state, I am running linux on a Sun Fire X4100 M2 BladeServer. The distro is ubuntu 8.10, kernel version 2.6.24 patchlevel 24. I need to monitor the thermal and fan statistics on this server, but there are no stat files in /proc/acpi/thermal_zone or /proc/acpi/fan. I have tried loading all of the lm modules (and all other available ones in the drivers/hwmon section of the kernel modules) provided with no avail.
View 1 Replies
View Related
Jan 18, 2010
i need a topology generator in which all the parameters for the topology should be got and the network should be generated for sensor networks
View 2 Replies
View Related
Oct 7, 2010
I am getting an error as below.
How do I resolve the error: make[2]: *** No rule to make target `', needed by `mpg123'.
How can I resolve this error.
View 4 Replies
View Related
