I searched a bit on the 'snet-sensor-mgmt' but I couldn't make sense of what it is for. Why is it running? and does it have to be on port 10000? I am thinking of installing webmin, but that port is taken. Fedora 14.
View 4 Replies
I have some legitimate business needs for the U1 Windows client port. Is there an ETA for this project completion?
Also, I have a personal need for management of the Favorites synching via the web management interface. When will this be rolled out?
I've installed OpenLDAP and libnss-ldap, as instructed in this tutorial. Then I try to login but I got the error
Code:
groups: cannot find name for group ID 10000
Here's the user and group ldif entry that I use to login
Code:
dn: uid=iwan,ou=people,dc=example,dc=com
objectClass: inetOrgPerson
objectClass: posixAccount
objectClass: shadowAccount
[code]....
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
I've got a Toshiba Satellite L655D-S5109 and the gnome cpu temp applet only shows 3 cpu's. Its a dual core AMD Turion II - I would have expected 4 cpu in the temp applet.
View 5 Replies View RelatedMy F-14 x64 bootup stalls with this message: "K10 temp ... unreliable CPU thermal sensor: monitoring disabled". I'm unable to find an explanation/basis for this message. I can boot from CD#1 and chroot onto the disk - near as I can tell, all the data is there. Might this be the result of a corrupt boot up sequence file and, if so, which one(s)?
View 3 Replies View RelatedI haven't been able to locate this cause. The problem developed as follows:
1. Used a downloaded .ymp file to add a community package, chose NOT to add the repo permanently from the Customize button... installation of package failed.
2. Added the repo manually in Yast Software Repositories and it went thru the process without error, BUT the repo never appeared in the list. (this is where i think the problem lies)
3. Tried to add the package using .ymp package without blocking the new repo addition... package installed successfully. Then deleted the repo using Yast Software Repositories gui.
Now starting Yast Software Management the process starts and downloads the repo.xml files from each enabled repo, then displays a error msg stating "Parsing Error". Dismiss and it loads the normal interface and seems to work properly from then on.
i am running ncat (netcat's new version from nmap) on centos . I am listening on different ports. My question is , is it possible that when a connection is received on a port say 123, i redirect this connection to a different port and use the 123 port again for listening connections. ncat has an option -k which u can add with -l , it will force fully listen on the port. It can accept multiple connections on a single port but i want that once a client connects on to 123 port, he is forwarded to some other port and no longer on 123.
View 4 Replies View RelatedI have two computers on a LAN. (This is history not a Bazaar question, although I have one of those too) One of them (Ubuntu 9.04) Im using as a Bazaar repository over sftp. Its been working fine for about a year. Then we had a thunderstorm that knocked out our Internet service for a couple of days. When it came back up everything is working fine accept I could no longer commit to the server. A little detective work showed that ssh was not running on the server. I started it and Bazaar then couldnt find the repository files. I still suspected an ssh problem, but port scans from both computers showed port 22 open on the server and I could do a ssh login from the client ok. Then I started fiddling with ssh on the server and now I have ssh problems on top of the Bazaar problems.
On the server I deleted then regenerated the ssh keys. Ive done
sudo /etc/init.d/ssh reload
sudo /etc/init.d/ssh start
I get a normal starting message and ps ef |grep ssh
shows /usr/sbin/sshd running. But the port scan does not show 22 open and I get connection refused at the client.
How can I find the PID for all processes running for a particular port?
View 3 Replies View RelatedI don't find a lot of information available regarding a service called pipe_server.When I send UDP packets without specifically a source or destination port, the packet capture from the machine, I send the UDP packet shows the following:
src port: pipe_server(2010)
dest port: pipe_server(2010)
More information related how send packets : I use raw sockets. I don't specify ports.Does the kernel fill the src and dest ports for me? Do all machines have a port 2010 that will listen for UDP packets?
Possible Duplicate: Finding the process that is using a certain port in Linux I'm using Ubuntu Linux 11.04. How do I write a shell script expression that will find the process running on port 4444 and then kill the process?
View 4 Replies View RelatedI have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies View RelatedI don't think it would be harmful to run ssh on the default port of 22. Especially since the machine will only accept key-based logins and only accept traffic on port 22 from external IP addresses that I specify.
View 8 Replies View RelatedI'm running both Apache on my site and Etherpad Lite, both on different domains. However, running them both on port 80 causes a conflict. I tried to use a reverse proxy in Apache (this is the configuration -- I'm not sure if I did it right), but it doesn't seem to do anything.
View 1 Replies View RelatedI have a crontab on my vps running every minute that checks to see whether or not a certain port is open on localhost. If the port isn't open, it should run the php script to restart the program. However, I require the use of screen to be able to interact with the program whenever I reconnect to the vps through shell.The problem is, screen is being a pain by saying "Must be connected to a terminal."This is the php script:
Code:
#!/usr/bin/php -q
<?php
[code]....
I have a need to displace a serial port from one Linux computer to another computer running Windows (XP.) I am running Heyu on a Linux machine in a closet. The power leg for that circuit cannot let the X10 communication reach most of the rest of the house. Where it does work, is from my office but there I am running XP computers only.
I would like to plug the CM11A into my XP computer, share it's serial port and have the home automation computer (running Heyu and Linux) use the LAN to get to the XP serial port without Heyu knowing it is not a local port. Has anyone done this? Can I share a serial port in XP? Can I get Linux to map a serial port to a virtual one on another machine?
I have 2 servers..
let say server A and server B
On server A open ssh is configured and is running on port 2298. So from my machine I can login there using ssh on port 2298
But when I login to server B and from there I try to connect to server A I cannot.
ssh: connect to host <ipaddress here> port 2298: Connection refused
My first time installing centos server and adding it to xp home network. I am new to setting up my own network in general. I have a home windows wired ethernet xp network (simple linxs router) with 2 xp boxes and one centos5 box all connected to the same router. I just set up the centos box running tomcat on port 8080. I need to do two very basic things at this point, but am not sure what I need to do:
What do I need to do so I can:
1. Connect in firefox on one of my xp boxes and call the tomcat server running on my centos box?
2. Be able to ftp to centos box from either of my xp boxes?
I'm trying to open up some ports to connect via vnc to a server running Centos 5.5. I've edited /etc/sysconfig/iptables everything *looks* fine, but I still can't seem to get access to the port I've opened (I added some newlines for clarity between commands):
[Code]....
I just upgraded to maverick meerkat two days ago and each time I boot I get a problem about the thermal sensor on my cpu. Apparently from this link below it has happened to others and supposedly a bug fix was going to be released, but I haven't seen one. Is there anything I can do about this? I have a amd phenom x4. [URL]
View 1 Replies View Relatedi want to add keys to the sensor nodes. Hence i want to know whether there is any parameter for key storage in senor nodes
View 1 Replies View RelatedI'm trying to configure the critical trip points on a bunch of servers so they will shut down automatically if they get too hot. Problem is, acpi doesn't seem to see any of the sensor data and /proc/acpi/thermal_zone is empty. Oddly enough, when I run "sensors," I get info back. Also, i2c and acpi appears to be installed according to modprobe and dpkg.
Here are the relevant outputs:
plasmo:/proc/acpi/thermal_zone# sensors
lm78-i2c-0-2d
Adapter: SMBus I801 adapter at 0400
VCore 1: +2.34 V (min = +0.00 V, max = +3.49 V)
VCore 2: +3.68 V (min = +2.96 V, max = +0.08 V)
+3.3V: +3.30 V (min = +1.54 V, max = +3.42 V)
+5V: +5.51 V (min = +5.51 V, max = +4.30 V)
+12V: +9.73 V (min = +10.94 V, max = +2.13 V)
-12V: -10.85 V (min = -11.57 V, max = -5.17 V)
-5V: -3.83 V (min = -2.96 V, max = -4.50 V) .....
I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedMy laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work
sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1: +55.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +54.0°C (high = +87.0°C, crit = +105.0°C)
[Code] ....
I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax
This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.
I just did a scan with lm_sensors, rebooted to apply the settings. Did nothing different than I have in the past except including the GPU sensor. Now the mouse pointer and the cursor seem a little jerky. Occasionally they don't immediately respond, less than a second but noticeable. I also had to adjust the mouse speed after applying the settings. Anyone know what's up here? I have a GEForce 8400 card.
View 2 Replies View RelatedOn a new fresh install of Lucid I am unable to fetch sensor information using this procedure [URL]... LM sensors et al are installed, but after running the sensors-detect command (twice), typing sensors into Terminal gives me "no sensors found". This same system (with no hardware or bios changes) displayed all the sensors OK in Jaunty. etc/modules looks like this. Am I supposed to uncomment # Chip drivers w83627ehf?
QUOTE
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Generated by sensors-detect on Wed May 26 14:38:00 2010
# Chip drivers
[Code]...
Is there a Linux application which can display motherboard and CPU sensor information and which also satisfies one other, absolutely key, requirement: It should be directly usable, after installation, by a reasonably intelligent computer application user. That is, it does NOT require deep internal knowledge of specific hardware or obscure system software customisation. It does not require hours, days or weeks of reading of documentation which is so crafted as to be the antithesis of end-user guides. It must be capable of being invoked easily.
This eliminates all software that the Ubuntu Software Centre lists when performing a search with the term 'sensors', with the exception of xsensors. All other software listed with this search installs without error but is then totally invisible to me - not even listed under 'installed software'. I am aware a key requirement to be a Linux developer is an advanced commitment to play games of 'I bet I can make my software harder to use than yours', but I'm too old for that now. I don't have a need to prove how technically capable I am.
Xsensors installs and tells me where it can be found, but is inadequate as it lists only 2 CPU core temperature readings. It does not give me any indication of motherboard temperature or fan speeds. That's all I want to do - get a simple snapshot of sensor values without having to resort to entering BIOS setup. It's the sort of information that is so easily available using the ASUS-supplied 'asus-probe' software under Windows. Is it possible, given the key requirement previously mentioned?
I've installed Krita in Kubuntu 11.04 and while GIMP works fine with the Wacom tablet (so Xorg is configured properly), Krita responds to the tablet pen as if it was a mouse (so on/off, no pressure sensitivity at all).
I've found old topics about bugs in Qt 4.6 but since we are now using 4.7, I assume those have been fixed?
As the subject state, I am running linux on a Sun Fire X4100 M2 BladeServer. The distro is ubuntu 8.10, kernel version 2.6.24 patchlevel 24. I need to monitor the thermal and fan statistics on this server, but there are no stat files in /proc/acpi/thermal_zone or /proc/acpi/fan. I have tried loading all of the lm modules (and all other available ones in the drivers/hwmon section of the kernel modules) provided with no avail.
View 1 Replies View Related
