OpenSUSE Hardware :: Fix Unreliable CPU Thermal Sensor ; Monitoring Disabled Error?
Sep 9, 2011I get this from console...
Code:
dmesg | grep thermal[5.927029] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
ADVERTISEMENT
Fedora X86/64bit :: Startup Freeze - Unreliable CPM Thermal Sensor
May 13, 2011My F-14 x64 bootup stalls with this message: "K10 temp ... unreliable CPU thermal sensor: monitoring disabled". I'm unable to find an explanation/basis for this message. I can boot from CD#1 and chroot onto the disk - near as I can tell, all the data is there. Might this be the result of a corrupt boot up sequence file and, if so, which one(s)?
View 3 Replies View RelatedUbuntu :: Thermal Sensor On Cpu
May 14, 2011I just upgraded to maverick meerkat two days ago and each time I boot I get a problem about the thermal sensor on my cpu. Apparently from this link below it has happened to others and supposedly a bug fix was going to be released, but I haven't seen one. Is there anything I can do about this? I have a amd phenom x4. [URL]
View 1 Replies View RelatedHardware :: No Thermal Sensor Or Fan Diags On Sun X4100 M2 BladeServer
Jan 30, 2010As the subject state, I am running linux on a Sun Fire X4100 M2 BladeServer. The distro is ubuntu 8.10, kernel version 2.6.24 patchlevel 24. I need to monitor the thermal and fan statistics on this server, but there are no stat files in /proc/acpi/thermal_zone or /proc/acpi/fan. I have tried loading all of the lm modules (and all other available ones in the drivers/hwmon section of the kernel modules) provided with no avail.
View 1 Replies View RelatedOpenSUSE :: Mousedown Is Unreliable, KDE 4.4?
Nov 8, 2010When dragging, or holding the mouse down in general the mouse tends to 'let go'. In some situations the mouse grabs *through* the window. For example, I may be scrolling in okular and suddenly find myself dragging an item in the browser below. The behavior is independent of the application (it may fall through Dolphin onto Okular just as easily). Highlighting text is the worst performing... It usually takes two to three goes to get the right range. Is this a known issue? Known solution?
OS Information
OS: Linux 2.6.34.7-0.5-desktop x86_64
Current user:
System: openSUSE 11.3 (x86_64)
KDE: 4.5.3 (KDE 4.5.3) "release 8"
[Code]...
Debian :: Thermal Allert: Unknown Thermal Allert Received?
Feb 25, 2010I just installed Debian testing on my new ThinkPad T400s. Everything went like a charm, but, I have three questions to fix some minors: (A) When I reboot or shutdown, just before everything turns off message appear:
[37.439999] thinkpad_acpi: THERMAL ALLERT: unknown thermal allert received
OpenSUSE Install :: Unreliable Boot With Hdmi Out?
Jul 28, 2011I have a TV connected to my 11.4 laptop all the time, when I boot Grub outputs its options on the TV screen, then lizard appears for a couple of seconds and then it switches to notebook monitor to continue booting. Or not. About half the time both screens, TV and notebook, go black and nothing happens.
So far I just reboot and wait until the switch from tv to monitor is successful, if that happens everything boots and loads fine. It's like unwatched milk - everything is okay until the moment you turn away and the milk boils over. Boot hardly ever fails if I sit and watch it but sometimes I get two fails in a row.
Never seen this behavior with 11.3 on the same notebook with the same hdmi always plugged in.It's a Core i5 with integrated Intel and a separate nVidia graphic card, what other info is needed? Grub? Dmesg output? Maybe there's a boot log file somewhere, too.
Ubuntu Installation :: Hp Envy 17 3D Instatll - Thermal Shutdown" Error Message
May 3, 2011My problem is as follows:Hp Envy 17 3D (2nd gen i7/6gig ram/720hdd/ Win 7 Home Prem 64bit) when attemting to install Ubuntu 11.04 I get a "thermal shutdown" error message. this error has been duplicated two times while attempting to install via Wubi
View 2 Replies View RelatedOpenSUSE Install :: Windows Disabled My Partition - Error 15 File Not Found
Sep 10, 2009Getting back my OpenSuse OS/partition.
Background: I had a dual boot system, Win XP followed by OpenSuse 11.1 install. I tweaked it a lot to get my wireless card and Nividia card working. Finally got it to a stage where it was working great.
What happened: For some reasons windows XP had some issues and I had to reinstall the OS. Since I have the openSuse install DVD lying around I took the bold step of reinstalling windows knowing that it will blow away the Grub from MBR. However, during the windows setup, the setup said something about setting the Linux partition as inactive (I think so). Unfortunately, I don't remember the exact message.
After finishing the XP install, I booted in with the XP Cd and tried the repair option to repair the MBR. That really messed up the MBR. So much so that booting back with XP boot CD and running fixmbr didn't work. Finally reinstalled windows again.
Now I am not sure what should I do next.
I tried using the superGrubDisk but it gives the following error: Error 15 File not found.
OpenSUSE Hardware :: Jerky Mouse After Sensor Scan?
Oct 10, 2010I just did a scan with lm_sensors, rebooted to apply the settings. Did nothing different than I have in the past except including the GPU sensor. Now the mouse pointer and the cursor seem a little jerky. Occasionally they don't immediately respond, less than a second but noticeable. I also had to adjust the mouse speed after applying the settings. Anyone know what's up here? I have a GEForce 8400 card.
View 2 Replies View RelatedUbuntu :: Error "No Thermal Support" - Integrate?
Jun 1, 2010I installed the Gnome Applet - Computer Temp. Monitor and it posts on the panel with a X through it and the error "No Thermal Support" how to integrate "Thermal Support"
View 2 Replies View RelatedOpenSUSE :: Finding A Monitoring Software For 11.1?
Jul 2, 2010For windows servers, we use System Monitor to monitor everything on the server from disk utilization, current connections, application pools in IIS, CPU performance, bandwidth, and others. Is there something like that for opensuse? My server is running apache and I want to be able to monitor the linux server in a similar way that I do Windows Server 2003. Preferably I'd like an app that will run from a win32 workstation.
View 5 Replies View RelatedOpenSUSE :: Application For Monitoring Directory Changes?
Nov 15, 2010I'm searching for something like crontab. but the action should not be executed at a specific time but after a file or directory change. I'd like to run some scripts as soon a new file is in a predefined directory.
A daemon / shellscript would be really great. Does anybody know something like that?
OpenSUSE :: Getting A Fan Speed/temperature Monitoring Program For 11.4?
Mar 18, 2011I have a dual boot with xp and opensuse 11.4. There has been an annoying 'system fan has failed' error message that was dealt with by replacing a fan and installing speedfan and hardware monitor on the windows partition, but my opensuse installation has no such programs running, and I want to keep things cool while I'm running opensuse. Speedfan is a program that tells the fans to turn on and off. Usually according to the temperature that the sensors are reading. The program shows temperatures and fan speeds and allows you to have control.Is there a fan speed/temperature monitoring program for opensuse?
View 7 Replies View RelatedOpenSUSE Hardware :: Sensors-AMD CPU Temperature Monitoring
Dec 4, 2010I have just recently installed opensuse 11.3 on my computer. I have switched from Ubuntu and have been trying to get things configured similar to what it was. One problem I have encountered is with installing sensors and k10temp, the module needed to monitor my CPU temp. within Linux. I have an AMD sempron and a biostar mcp6p m2+ motherboard. I have installed package "sensors" and have run the sensors-detect and it went through and found k10temp that I would need to load within the kernel for this to work properly. I had this working in Ubuntu, but not sure how to do it in openSuse. I have tried compiling the k10temp source, running modprobe k10temp and received no output, and looked around the conf files, but not sure how to go about doing it?
View 2 Replies View RelatedOpenSUSE Hardware :: Temperature Monitoring In 11.4 + GNOME 3?
May 18, 2011Temperature monitoring in 11.4 + GNOME 3?
View 7 Replies View RelatedOpenSUSE Network :: Monitoring Incoming And Outgoing Connections?
May 19, 2010My question is simple - is there any linux app or applet which is able to show (monitor) incoming and outgoing connections assuming it's a direct internet access? I was using a firewall on a system off Redmont which was able to show every connection, listening ports of services if some were opened etc.
View 1 Replies View RelatedUbuntu :: HDMI Sound Is Unreliable?
Feb 8, 2011I'm using an HDMI connection, and the sound connection is unreliable at best. When it works, it is working fine, then all of a sudden (maybe because it isn't being actively used for an extended period of time)the sound connection vanishes. When at System --> Preferences --> Sound --> Output I'm not seeing any option for the HDMI connection currently and the sound is not working. All the volumes are unmuted and I cannot use a softphone nor .....,nor do videos that I have watched in the past with sound have any.
Last night when this happened, I rebooted and the sound was working just fine then. In the past, I was able to get the computer to recognize the HDMI connection has sound by momentarily unplugging it, then plugging it back in. Though both last night and today that hasn't worked.When I bought my computer, I had Windows 7 installed on it. The same thing was happening then, though it was always fixed via disconnecting the HDMI connection briefly, so there is the possibility of it being a hard ware issue.
I've also tried turning off the device (a HDTV in this case) and turning it back on, but that only solved it once or twice, and neither last night nor today.This is also a 64 bit computer, should that be relevant. Using Ubuntu 10.10, and the only available update to my system at the moment is Google Chrome, which I will be updating after this post.I will be restarting my computer after that update and posting back here if the sound is working, especially with note of whats listed at the System --> Preferences --> Sound --> Output if there are any additional options (from memory, there was an HDMI choice there).
Ubuntu :: Printing From OpenOffice Is Unreliable
Jul 10, 2011In general, OpenOffice is quite buggy. My latest problem has been printing. I have this .dot file. When I print it to a networked printer, the document never prints. However, these work:Print to PDF. Printing to a file, transferring the file to the destination machine, and printing it works. Transfer the document. If I print the document directly on the destination system using LibreOffice, it works fine. Printing a web page. This works fine. Since I have a workaround, it's not so crucial that this be fixed. I'm just venting .
View 2 Replies View RelatedOpenSUSE Install :: Respawning Too Fast - Error: "Respawning Too Fast - Disabled For 5 Min" Freeze
Dec 12, 2009Installing 11.2 from KDE LiveCD on an IBM ThinkCenter with 3.2Gb CPU and 1Gb RAM. Ubuntu 9.04 on first two partitions. I go through the configuration, click to 'install': Install display bars remain blank. After 2-3 minutes, black screen with scroll of attempted installation pieces and the error message: "Respawning too fast. Disabled for 5 min." Freeze.
Other posts mention problem with init. But this is happening with the install so not able to address that. No apparent md5chksum for LiveCDs. No mention of this problem in installation help guide. Does anyone know how to deal with this? If you need more info, I will provide. Though it seems this is not an unusual problem when booting an installed system, there's no mention of it happening during installation.
OpenSUSE :: Good Application For Reviewing And Monitoring / Overclocking System?
Jun 11, 2011can someone recommend an application similar to AMD app in windows, that can be used to monitor and overclock system.
View 9 Replies View RelatedOpenSUSE Install :: Dmraid Vs Mdadm And RAID Status Monitoring?
Apr 22, 2011I'm pretty new to FakeRAID vs JBOD in a software RAID, and could use some help/advice. I recently installed 11.4 on a brand new server system that I pieced together, using Intel RAID ICH10r on an ASUS P8P67 Evo board with 2500K Sandy Bridge CPU. I have two RAIDs setup, one RAID-1 mirror for the system drive and /home, and the other consists of four drives in RAID-5 for a /data mount.
Installing 11.4 seemed a bit problematic. I ran into this problem: [URL]... I magically got around it by installing from the live KDE version with all updates downloaded before the install. When prompted, I specified I would like to use mdadm (it asked me), however it proceeded to setup a dmraid. I suspect this is because I have fake raid enabled via the bios. Am I correct in this? Or should I still be able to use mdadm with bios raid setup?
Anyways, to make a long story short, I now have the server mostly running with dmraid installed vice mdadm. I have read many stories online that seem to indicate that dmraid is unreliable versus mdadm, especially when used with newer SATA drives like I happen to be using. Is it worth re-installing the OS with the drives in JBOD and then having mdadm configure a linux software raid? Are their massive implications one way or another on if I do or do not install mdadm or keep dmraid?
Finally, what could I use to monitor the health and status of a dmraid? mdadm seems to have it's own monitoring associated with it when I was glazing over the man pages.
OpenSUSE Network :: Monitoring A <<BLIND>> 11.3 Server From A Laptop ( 11.3 And WinXP )?
Apr 3, 2011I have a box which I want to make a Samba PDC opensuse 11.3 server, but it doesn't have monitor nor keyboard during normal use. After a standard installation with keyboard and screen, I will have to remove the screen and the keyboard for lake of space. Are there ways to monitor this linux server through my laptop so it act as the screen and the keyboard of the linux server? At any times, the laptop is running desktop opensuse 11.3 or windows XP.
View 9 Replies View RelatedUbuntu :: Error Message - Connect Debounce Failed Port 3 Disabled
Sep 14, 2010Connect debounce failed port 3 disabled. i get this in the terminal (alt+f1) every time i log on. i like this terminal better than the standard one and i want the error message to stop appearing every time i try to type something.
View 5 Replies View RelatedUbuntu Installation :: Error: Exception Handling Disabled - Use Fexceptions To Enable
Sep 27, 2010I want to compile ekiga 3.0.2 for ubuntu 10.04. But when I enter 'make' command in the terminal windows, it says that;
[Code]...
I tried to solve the problem by setting CFLAGS = -fexceptions, in the Makefile. But it didn't work.
Ubuntu :: USB Serial Adapter Unreliable On Startup
Mar 8, 2011I am using a Sealink PN 2202 USB serial adapter on a linux box (Ubuntu 10.4) running kernel 2.6.32-28-generic. I have written a perl script to simply log the incoming RS232 data (9600 8N2) and it works fine when I start it from a bash shell:
perl /home/pk/PerlCode/RS232_D4_v11.pl
However, I need the computer to boot and start logging after a POR. If I try to use Startup Manager to execute my script everything seems ok but I randomly loose about 20% of the incoming RS232 data. In Startup Manager I use the command
gnome-terminal --title="D4 RS232 Log" --execute bash -c "perl
/home/pk/PerlCode/RS232_D4_v11.pl"
If I close the automatically-started script and restart it from a bash shell, I again will randomly loose about 20% of the incoming RS232 data. It almost seems like I have screwed up the driver by using the Startup Manager. The only way I can get reliable logging again is to remove the script from Startup Manager, then restart the computer and manually launch the perl script. I was thinking that maybe the order in which the driver was loaded and perl script started might be an issue. So I tried a bash script that sleeps for 15seconds, then starts the perl script. Again, I loose random pieces of incoming data when this is initiated by Startup Manager.
Here is some more info:
lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 0c52:2223 Sealevel Systems, Inc.
Bus 002 Device 003: ID 0c52:2213 Sealevel Systems, Inc.
Bus 002 Device 002: ID 03eb:3301 Atmel Corp. at43301 4-Port Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub .....
sudo cat /proc/tty/driver/usbserial
usbserinfo:1.0 driver:2.0
0: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0c52
product:2213 num_ports:1 port:1 path:usb-0000:00:1d.0-2.1
1: module:ftdi_sio name:"FTDI USB Serial Device" vendor:0c52
product:2223 num_ports:1 port:1 path:usb-0000:00:1d.0-2.2
ls -al /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 2011-03-08 09:56 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 2011-03-08 09:56 /dev/ttyUSB1
I am a member of the group dialout.
I though it may have something to do with su vs my ownership of files. If I do a sudo chmod 777 /dev/ttyUSB* then
ls -al /dev/ttyUSB*
crwxrwxrwx 1 root dialout 188, 0 2011-03-08 09:56 /dev/ttyUSB0
crwxrwxrwx 1 root dialout 188, 1 2011-03-08 09:56 /dev/ttyUSB1
However, after rebooting it reverts to
ls -al /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 2011-03-08 09:56 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 2011-03-08 09:56 /dev/ttyUSB1
Networking :: Wireless Connection Slow And Unreliable?
Sep 19, 2010I just got a wireless card and I've been having connection issues under Linux. The chipset I have is a Ralink 2860 (the card itself is an Asus PCE-N13) and supports 802.11n speeds up to 300 mbps. I am connecting to a DLink DIR-655 router, which also supports 802.11n at 300 mbps. I get full bars when connecting to my router, and my router's connection information shows my computer connected as 802.11n with the signal at around 80%, but the data rate is usually around 5.5 mbps. (I've rarely seen it go up to 18 mbps) I can confirm this woefully slow speed with anything I try to do over the network. Additionally, my wireless connection will sometime be disconnected and network manager will often fail to connect. When it fails to connect, my router lists my comptuer with the correct IP address, so I know it is successfully connecting to the router and the router is accepting the connection, but network manager seems to not recognize this.
I am running Debian Squeeze (testing), but I have a custom kernel, which is 2.6.35 and is using Debian's kernel configuration. I have the newest firmware from Ralink's website, and I also tried the newest drivers, which made no difference. (I have since removed those drivers, since I'd prefer to use the drivers supplied with the kernel if possible, but I can install them again if necessary) I put this card in my main computer and booted under Windows, and it was able to connect with 100% signal (it's right next to the router) and at 300 mbps. I also tried it under Debian on my main computer (with the stock 2.6.33 kernel), but it only connected as 802.11g, and even at 100% signal it was only connected at 36 mbps. For comparison, my laptop with an 802.11g card and running Mac OS X can achieve the full 54 mbps at 84%.
[Code]...
Hardware :: HP 5610 All-in-one Fax VOIP And Unreliable Fax Transmission?
Feb 10, 2009I have this HP 5610 all-in-one fax machine and have always had the issue of faxes failing either receiving or sending ever since I began using VOIP at home about 5 years ago. I have played with the setting of the fax machine and turned off error correction and etc and it has improved but mostly still fail. Voice quality if fine and my network has no problems that I can tell. I have read on the internet that this is a common issues with VOIP and fax machines. This issue is also happening at a friends house as well.
View 3 Replies View RelatedSoftware :: NMap - OSScan Results May Be Unreliable
Jul 9, 2011I'm currently doing some experiments with nmap in a Backtrack 5 VM environment. I am currently at a cafeteria and I'm connected to the (open :S) network at the shop with my Windows machine. In the BT VM I'm trying to scanning my Windows machine (with another network adapter) but I'm getting unexpected results:
nmap -A Aggressive -sS -O 10.236.xxx.xxx
Starting Nmap 5.51 ( http://nmap.org ) at 2011-07-09 12:11 CDT
Nmap scan report for Aggressive (67.215.xxx.xxx)
Host is up (0.17s latency).
rDNS record for 67.215.xxx.xxx: hit-nxdomain.opendns.com
Not shown: 999 filtered ports
PORT STATE SERVICE VERSION
80/tcp open http lighttpd 1.4.19
|_http-methods: No Allow or Public header in OPTIONS response (status code 302)
Warning: OSScan results may be unreliable because we could not find at least 1 open and 1 closed port
Device type: general purpose
Running: Linux 2.6.X
OS details: Linux 2.6.9, Linux 2.6.9 - 2.6.30
Network Distance: 1 hop
TRACEROUTE (using port 80/tcp)
HOP RTT ADDRESS
1 14.97 ms hit-nxdomain.opendns.com (67.215.xxx.xxx)
10.236.xxx.xxx is my Windows machine but another machine in the network (67.215.xxx.xxx) is currently replying to my nmap scanning.
Server :: Error: No Route To Host" Both Systems Ping Each Other And Firewall Is Also Disabled
Feb 2, 2010using redhat on server machine and open suse on client machine.i have installed nfs server and and it is running properly but when i want to mount shares from my client machine it gives the following.
error. "mount.nfs: mount to NFS server '10.3.31.146:/share' failed: System Error: No route to host" both systems ping each other and firewall is also disabled. another problem is when i remotely access from my server machine to client machine it gives the following error ssh:connect to host 10.3.31.147 port 22:connection refused what can be the problem?
