General :: Access NAS Other Than Through FTP?
Jul 30, 2010
I have 2 desktops, 1 windows 7, and the other is Fedora 13. I also have a NAS installed on the network.
In windows, I had it setup so I could simply point to //nas/folder/file.txt and it would work fine. My NAS's hostname is "NAS".
How can I do this on Linux? I can see the files if I want to go through the NAS's FTP service, and I also tried mounting it as an NFS resource which works too (sort of).
Whenever I mount it in a folder (/mnt/nas) for example, I cannot access the directories unless I'm root. What's the point of that? I need full access to my NAS contents.. is there anything I'm missing? Do I have to mount it each time I start fedora?
View 3 Replies
ADVERTISEMENT
Nov 15, 2010
I'm a terrible procrastinator, it's awe-inspiring annoying and stressful. This in combination with being a information-holic makes the Internet fairly lethal to me; I risk failing my college course because of it, so trust me when I say I'm deadly serious about this.
However, I think you guys may be able to help out, and maybe this will also help some people here with similar problems:
Because so much of my time is taken up with Interwebz, I thought to carefully restrict my internet use. It's not prefect, but it's part of a solution.
To date: I have Firefox and the ProCon extension which uses a whitelist of websites I can access. The extension cannot be uninstalled/disabled and I use a long hex password split into 3 parts, two of which my friends have (so I have to ask my friends for the password parts in order to update the whitelist, hence making it socially awkward to fritter away time online).
So far, it has worked a treat and I'm really pleased with it.
However, this is the problem:
I need to restrict web access so *only* Firefox can access the web. That way I cannot use Chrome/Opera, or even (shudder) use wine to run Internet Exploder.
View 6 Replies
View Related
Aug 26, 2010
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
View 3 Replies
View Related
Jun 27, 2010
A friend of mine helped me set up a server which includes Squirrel Mail.It?s CentOS 5.3.I have a person who would like to access Squirrel Mail at remote sites.My questions is, I can create an account on the server which has KDE and the usual general applications and he would have the remote access Squirrel Mail but he doesn?t need nor does he want to access KDE or anything else on my server. He just want an account so he can use Squirrel Mail.
View 1 Replies
View Related
Oct 25, 2010
i cannot access my Linpus linix lite v1.0.9.E operating system. i used it after accessing the internet now i cant even work on it.
View 10 Replies
View Related
Sep 27, 2010
how to access wi fi in the Red hat 5.5?
View 2 Replies
View Related
Aug 26, 2010
I installed 11.3amd64 as a VM under Vista/VMWare Player - all worked fine. I have now installed it as a physical system. It nstalled cleanly BUT during first boot it could not access the repos. With each repo it gave the message
- download (curl) error for (repo)
- error code connection failed
- error message could not resolve host (repo)
This was followed by a message box containing
- UI syntax error
- no widget with ID 'contents
Firefox could not access the internet (cannot find server) until I disabled IPV6 (I used about:config), now it works fine. I think the repos problem is because of IPV6 - I usually have trouble with IPV6. I tried disabling IPV6 with the following (How To Disable ipv6 on SuSE Linux | Linux Poison)
[code]......
View 8 Replies
View Related
Mar 26, 2010
I'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
View 4 Replies
View Related
Sep 12, 2010
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
View 1 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
Jun 12, 2009
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
View 1 Replies
View Related
Apr 2, 2011
i need office 2007 to complete school work as openoffice doesnt support access databases. i switched to linux as i didnt have my recovery discs for windows and wanted to start afresh. my problem is that i have got word,excel,powerpoint & publisher working but access just wont load. i click the logo and it does say starting access on the bottom taskbar but then it disapears and nothing happens. ive tried google and havnt really found a answer im running ubuntu 10.10 and i have wine installed This is kind of urgent as i have a deadline fast aproaching and need access at home to progress in work
View 3 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
Jun 11, 2010
I have an old FC2 box running Squid version 2.5. It has been running since 2003 so I am in the process of replacing it. I have a new machine with FC11, iptables, and Squid 3.0 installed.
On the old machine I use iptables to intercept Port 80 traffic and send it to Squid. By default I block all internet access and allow only sites that are in an Allowed_Sites.txt file. Within Squid I also have statements to allow certain users to bypass Squid based on their IP address.
I have set up the same thing on the new box. I have iptables intercepting the Port 80 traffic and sending it to Squid. That is working because if I remove the redirect statement from iptables all internet access is blocked.
The problem I am having is that Squid is not blocking any websites. It acts like the ACL is set to http_access allow all. I have worked on this for several hours and am stumped.
These are my Squid rules:
acl allowed_sites url_regex "/etc/squid/Allowed_Sites.txt"
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
acl SSL_ports port 443
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access allow Bypass_Users
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
acl our_networks src 192.168.1.0/24
http_access allow allowed_sites
http_access allow our_networks
http_access deny all
icp_access deny all
htcp_access deny all
http_port 192.168.1.254:3128 transparent
hierarchy_stoplist cgi-bin ?
access_log /var/log/squid/access.log squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320
visible_hostname FC11.proxybox
icp_port 3130
coredump_dir /var/spool/squid
View 2 Replies
View Related
Mar 11, 2010
I have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies
View Related
Apr 22, 2010
I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:
Code:
/dev/md0 /media/raid auto rw,user,auto,exec 0 0
After i mounted it, i changed the permission with:
Code:
sudo chmod 777 /media/raid/
So now i can create folders and files on it.
Then i created some shares, one with guest access and other with no guest access.
Now the questions:
1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".
2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?
View 1 Replies
View Related
Sep 11, 2010
i put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies
View Related
Jul 6, 2011
I connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies
View Related
Feb 9, 2010
Have no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com
but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.
View 2 Replies
View Related
Sep 1, 2010
My computer runs Windows 7 and my server runs Linux CENTOS 5.5.
What software do I need on my W7 machine to access my server with SSH?
View 5 Replies
View Related
Feb 19, 2010
I am using fedora 10. When i connect it from other system ,I am not able to access the gui application like (kate,gedit,etc...) even though i connect ssh with X option.
ssh -X root@192.168.1.11
I am able to login with the system. But
It showing error
kate: cannot connect to X server localhost:10.0
View 10 Replies
View Related
Feb 28, 2010
I am having a really annoying problem. I have a VPS service, not shared. I am trying to access my php.ini file though PuTTy and the location is /usr/local/lib/php.ini I do the following command
pico /usr/local/lib/php.ini
the file seems to be empty, all that is brought up:
date.timezone="America/Denver".
I need to access it and change some settings!
View 1 Replies
View Related
Jun 17, 2010
i'm using fedora 9 and mozilla 3 with dsl internet connection. i can't access some site in my computer but other computers can using internet explorer. i hope this is the right forum for this.
View 8 Replies
View Related
Apr 29, 2010
I have installed a cvs server i want to give access to the cvs only from certain ip from my LAN is there any tag to add to /etc/xinetd.d/cvs file to do this. also provide me information on how to secure my server
View 2 Replies
View Related
Aug 29, 2010
I recently set up a mailserver on ubuntu using postfix. I set up the MX record with my router's ip address and I have port 25 forwarding all the mails to the ubuntu server. Everything works fine but I am unable to access my email using example.com/squirrelmail from any other machine apart from the server.
View 7 Replies
View Related
Mar 20, 2011
I am using fedora on my home pc. Due to some reasons fedora is does not show my GUI interface. I want to access my shell prompt. how can I access my system at prompt so I may troubleshoot my system
View 7 Replies
View Related
Jul 13, 2010
How do I give a regular user account sudo access?
I'm using CentOSv5 (essentially Red Hat Enterprise 5).
View 11 Replies
View Related
Oct 24, 2010
I can not access internet with Linux. I enter password which I use for windows.
View 5 Replies
View Related
Jan 18, 2010
My server started acting flaky this weekend and my Webmin interface was throwing strange errors. I finally tracked it down to the fact that I was out of inodes on my primary partition. I'm fairly certain that the /tmp folder has an outrageous number of files in it.I can't do an ls on the directory because the console just sits there forever after I issue the command. I also tried to do an rm -rf on the /tmp directory and it did the same thing.
View 14 Replies
View Related
Jul 26, 2010
i have installing the server XAMPP on my PC but i can't access to Mysql
[root@localhost lampp]# mysql -u root -p
bash: mysql: command not found
View 5 Replies
View Related
