so I have been messing around with the new Vector 7.0 alpha and wanted to install the nvidia driver and see if it would work. my video card and cpu are as follows
Code:
root:# lshw
PCI (sysfs)
vector.linux.net
description: Desktop Computer
width: 32 bits
[Code].....
hHey i recently installed Debian Squeeze 64bit over my Ubuntu & Windows, i got everything installed and running including all programs i need without a single problem The one thing i havent been able to do yet is install the Nvidia Driver for Geforce 8800gt, ive searched a few sites but one site is telling you to do this way and the the is telling you to do it another way then people are saying about having errors when xorg updates and stuff.
So i was wanting to know whats the easiest and best way to install the Nvidia Driver package (from nvidia website) onto Squeeze 64bit, i've done it on lenny but cant remember ow
If i get this working then il probaly use Debian as my main OS from now on.
I need to set my resolution to 1280x1024. Problem is, that the NVIDIA X Server Settings does not display such a resolution and I want to use that! My monitor is an LCD capable of upto 1280x1024 75HZ resolution. I'm using Ubuntu 10.10. I did the xrandr command to check what resolutions are available and its output was:
Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0 60.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0
640x480 56.0
512x384 57.0
400x300 58.0
320x240 59.0
In NVIDIA X Server Settings, the list of available resolutions are:
(all of the above)
1152x864
1360x768
I have NVIDIA GeForce 9500GT.
I'm running Slack64 13.1 and I'm in good shape with the 33.4 kernel, but if I upgrade the kernel to 35.x what do I need to do to get it working with my Nvidia 7300GT? I have the nvidia installer, NVIDIA-Linux-x86_64-260.19.12.run. Do I just do from the stable repo
Code:
slackpkg upgrade
then boot to run level 3 and run NVIDIA-Linux-x86_64-260.19.12.run? Thanks for your help.
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies View RelatedJust installed Ubuntu, have no idea what I'm doing. This message appears and don't know how to do it. "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."
View 2 Replies View RelatedI upgraded Karmic Koala to Lucid Lynx, Alpha 2. Now I want to upgrade to Alpha 3, and eventually to BetaX. When I enter the command updata-manager -d, the system says that I am up-to-date. Is there a direct way to upgrade to the latest Alpha, or do I need to download the .iso, build a CD, and do an install from that?
View 2 Replies View RelatedI've installed Debian (Lenny) on my pc, with geForce 8500 GT, two monitor (LCD + CRT). i've correctly installed the driver i can enter in the nvidia's setup but:
1) the best resolution for my CRT (Sony Brillance 109P) is 640x480
2) video on LCD (LG Flatron L222WS) is no good bat I can setting different resolution
3) I can't save the XConfig cause i don't understand what permission I must have for writing on 'etc' folder
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
My old xp is too slow, so I am intending on re-installing from scratch. I will first raid 0 my drives. Then install XP, followed by Ubuntu. From browsing on net it seems many people have problems with dual booting. (I did several years back). Any simple Free boot managers that are tried and tested. Can/will do some editing of Boot manager if required.
View 3 Replies View Relatedi need drivers for monitor 17' adi nh 776 for linux bt4.because i cant change resolution at nvidia xserver setting...
View 6 Replies View RelatedNormally I use disper to enable my external monitor, but I don't think I can force the 2nd monitor to be primary. [URL]
I've played around with nv-control-dpy included in the nvidia-control source, but I haven't figured out how to do it yet. How to get: [URL]
This is a laptop, to which I connect an external hdmi display when I get to work. dipser -e extends the desktop for me, but the laptop remains the primary desktop (holding the panels etc). nvidia-settings can set primary monitor for me, but I want to use the cli.
I had fedora 12 working nicely and tried to add Compiz. That has caused my laptop to hang with the cursor blinking. I can get to the virtual windows with Ctl-Alt-Fx keys. However I am not sure what to fix.I had run Dmesg and it is complaining that it can not locate the Nvidia driver. I believe it mentions Nvidia.ko but will need to verify that.My thought was that if I just did an "upgrade" maybe that wold restore the GUI and I could go forward from that. I am trying to get awaay from the MS world.
View 1 Replies View RelatedThe freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedI am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
From where can I get some Ebooks on Vector graphics. Also an Ebook on Operating systems
View 1 Replies View RelatedI just found in kernel-2.6.35.3, in file arch/x86/kernel/irq.c:
unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
/* high bit used in ret_from_ code */
unsigned vector = ~regs->orig_ax;
[Code]...
Does any body know the relationship between the vector number and irq number?
It would appear Nvidia are to drop support for the 'nv' driver,recommending using the Vesa driver instead until you install their proprietary driver.Read the article here:
View 14 Replies View RelatedI have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed
1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx
[Code]...
After installing Ubuntu 10.04, kept getting this popup advising me of an Nvidia accelerated graphics driver 96. After installing it my highest resolution is 640x480 and I get the following error:
"It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? Yes/No"
How do I get this thing to a 1024x768 resolution?
i have downloaded nvidia drivers,but the problem is,how to install in correct ways because i have tried so many times but the errors still there..the error is ****you appear to be running an x server,exit x before installing.
View 2 Replies View RelatedI just upgraded drivers and my desktop looks a mess. I have read there are issues with this driver but I have not seen this.
View 2 Replies View RelatedFor some reason I can't seem to get my driver installed on my PC with Nvidia graphics... Only Ubuntu seems to be able to do it and it still doesn't do it correctly..
Heres my hardware
BIOS
Code:
Code:
Code:
Code:
configuration:
memory:
lspci
Code:
On slackware, arch, etc I can't get the driver installed SBOPKG, etc all fail....
They all say it cant find kernel source/modules,etc
I'm new to linux and trying to install the driver for Nvidia quardo fx 380 lp in redhat 5.4.From the Nvidia site I got the driver for this card to be NVIDIA-Linux-x86-260.19.12. I did check version of the gcc and kernel built by the gcc version. I also checked the following commands. # cat /proc/version Linux version 2.6.18-194.el5PAE (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Fri Oct 29 22:00:21 EDT 2010
[Code]....
I installed the Nvidia driver for the on board GeForce 7025 / nForce 630a the "Debian way", according to this link Debian Nvidia Howto. The problem is that the only available screen resolutions are 640x480 & 320x240 and I need something more like 1024x768. The driver is installed correctly, or at least is properly recognized, as in Nvidia Xserver settings, GPU0 appears as GeForce 7025 / nForce 630a.
Here's the xorg.conf file.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
[code]....
..only causes gdm not to start.On my Ubuntu partition, I have working the proprietary Nvidia driver (file: NVIDIA-Linux-x86_64-260.19.36.run), and have had no problems from it at all. I was going to install this same driver onto Debian when I read several pages advising to go the "Debian way".
About a month ago, I decided to go deeper in my Linux knowledge. I've been reading a lot and found out that Arch linux would be my learning distro. As I was installing Arch, it was a pain at first but I really learned a lot which I would never ever learn with Mint. Now I decided to take a step further is which "compiling your own kernel".
MY PROBLEM:
Everything was smooth in my Arch for a 2 weeks until I decided to compile my own kernel. I currently have a Nvidia GTX 460 1GB card.
BTW, the method I used to install nvidia with 2.6.37 was
Code:
pacman -S nvidia nvidia-utils
and that worked with all of the .37 kernels (-1 -2 -3 -4) which was download from kernel.org.
When I compiled the .38 (using the same .config of .37), it just boots up to the terminal (not loading gdm). However, I could still login by typing my username and password. So I've checked dmesg of both .37 and .38 and noticed that the Nvidia driver is not loaded in .38.
I tried reinstall it by running pacman and it doesn't do anything. It was thinking of uninstalling nvidia and nvidia-utils but there are so many dependencies conflicts (like screensaver, compiz, etc).
Since, I didn't want to mess up my .37 install, I just grabbed an old HDD and installed from scratch again. This time, I compiled the .38 kernel first (without gui) and then installed nvidia nvidia-utils. It was the same problem.
With this observation, I'm concluding that the nvidia and nvidia-utils from pacman is not compatible with .38.
I've read that I have to wait for nvidia to release a driver that will be compatible with the .38 kernel. Is that true? Does it mean I have to wait for nvidia/nvidia-utils to be updated from pacman? How would I know when it is updated?
I've also read about nouveau, but I guess that is not for me because it doesn't support 3D.
Is there a work around for me to use nvidia/nvidia-utils with .38?
Is nvidia and nvidia-utils proprietary drivers? What is the difference with these two and the one you download directly from nvidia?
First of all, I apologize for the bombardment of questions. As you can tell, I'm so clueless on how nvidia drivers work on linux in general (since it was spoon fed by mint) and I really would love to learn about this is a deeper level. Could someone please explain to me (LAYMANS terms) how nvidia works (and possibly a solution to my issue).
EDIT: Additional info - I have a netbook that also runs arch. It uses an Intel GMA integrated video chip which I used "xf86-video-intel" from pacman and I believe since it is open source, it works with .38 fine. So does that mean if you use an open source driver, it will work with all other kernels?
I am trying to find a driver for a nVidia GeForce4 MX 420 for Fedora 12, I know its old, but I can't find a working driver for it.
View 9 Replies View RelatedI have a CentOS 5 virtual machine (VMware Workstation 7) running under a Windows host, and need the workstation's NVidia graphic card (Quadro NVS 295) to work optimally for my data analysis tools.
When I try to install the Linux driver from NVidia's webpage, I get "You do not appear to have an NVIDIA GPU supported by the 190.53 NVIDIA Linux graphics driver installed in this system". I have found my workstation's graphic card in the list of supported graphic cards in the README.
I suspect this has to do with VMware's own graphics controller having taken over, because when I do "/sbin/lspci" I see: 00.0f.0 VGA compatible controller: VMware SVGA II Adapter
Does anyone out there know how I can let the NVidia driver get installed and take over (it looks like I need its newest version for my software to render properly)?