I have for like 4 days now been doing a SourceMage 10.0 install on my K7 PC. I cant get X to start and cant get the nvidia driver installed
1) which Nvidia driver to use?
Heres my PC's specs
http://multidistro.com/K7
Also, I have made a .xinitrc for LXDE in /home,etc
and have it all set up; but X wont run
I am trtying to use driver legacy 96xx
[Code]...
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
I mucked my system up while trying to install proprietary nvidia drivers -- I was careless and installed the wrong ones (should have used legacy drivers). Now my system hangs on "starting udev" during boot.I have tried many combinations of boot options in an effort to blacklist the problematic driver. Attached is a picture of my boot screen after specifying the options "single init 3 modprobedebug", and removing the options "rgbh quiet". For some reason I am having a lot of trouble blacklisting the correct module, or maybe I caused a kernel problem, which in that case is beyond me.Also, boot option syntax question: can I specify something like "rdblacklist=*nvidia*" using wildcards?
View 5 Replies View RelatedI installed the newest restricted driver for my gts8800 nvidia card in an attempt to get starcraft b.net to work. Come to find out this has been a long standing bug with the menus not redrawing properly. My question is, now that I've installed the restricted driver 188, how do I go back to an open source one?
View 1 Replies View RelatedAfter installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies View RelatedI just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies View RelatedI finally got around to installing the Nvidia driver (gotten from Slackbuilds.org).
Overall, I'm pretty happy with it, but it wants to default to 1280x1024 resolution and we prefer 1024x768 on our old 17" CRT monitor.
No matter what I do, though, it starts up in 1280x1024. We start X from runlevel 3 and go into KDE 4.3.1.
It is not difficult to change to 1024x768 using the Nvidia configuration utility, but then the menu fonts are HUGE -- especially in Thunderbird and Firefox.
My xorg.conf is below.
xorg.conf:
Code:
I installed nvidia graphics card on my fedora 13. It is not starting since then. Just the logo of fedora comes up, progresses, and it stops. What can be done to boot the os?
View 2 Replies View RelatedI just installed My first Linux / Ubunto. PC as a Nvidia 8600, installed Nvidia driver. Very poor quality display. Using ViewsonicVP231wb.
View 9 Replies View RelatedI tried to install drivers for my GeForce GT 630M graphic card. At first, I just installed nvidia-detect and there was a suggestion to install nvidia-driver:
Code: Select allsudo apt-get install nvidia-detect
nvidia-detect
sudo apt-get install nvidia-driver
After reboot, there was a sad ?monitor like this one: [URL] ....
After first failure, I tried to use Debian wiki tutorial for Debian Jessie (probably I should have done this at first )
Code: Select allaptitude install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') nvidia-legacy-304xx-kernel-dkms
echo -e 'Section "Device"
Identifier "GPU Nvidia"
Driver "nvidia"
EndSection' > /etc/X11/xorg.conf.d/20-nvidia.conf
But also without success. Now I can't use X at all.
I have recently installed openSUSE 11.4 x86_64 on my laptop, with NVIDIA driver (260.19.44,Geforce 9300M GS).Performance is good, but it slows the boot process: The NVidia logo appears and stays on the screen for 10 seconds aproximately.KDE start is very slow also. I have tried to fix it by adding nomodeset to menu.lst and settting sysconfig variable NO_KMS_IN_INITRD to yes,with no success.
View 9 Replies View RelatedI am trying to install ubuntu 10.10 on my new computer: an Asus U33Jc. It is a 64bit machine. Everything seems Ok until I try to install the nvidia drivers. First, I tried to install it through the graphical interface as it popped up shortly after the install. Then, I tried to install the most up to date driver (290.19.36) found on nvidia's website. In both cases I get the same problem.
When I boot the computer it freezes at startup typically at the stage: "Checking battery state..." but not only (sometines before or after). In any case I never get to a graphical interface. I looked at many forums on the web (here here here and here for instance). But no solution work so far. Apparently there is a conflict with nouveau so I have blacklisted it. It seems the computer does not send the information on the good output, so I tried to twick my xorg.conf in different ways without any result.
I'm not sure what Nvidia driver I installed the other day, but it's messed things up. After Ubuntu boots up and asks for login, I am greeted with terminal. Setting 1152Xwhatever resolution failed. Setting to 1024X768. My xorg.conf.old file is completely empty, so I have no idea what the original settings were. I have tried removing and reinstalling xserver.xorg but that hasn't seemed to get me anywhere. I have also used the "apt-cache search nvidia" command to see what drivers could be installed, but every single driver that I attempt to remove isn't installed.
View 5 Replies View RelatedCan't enable 3d effects on lucid lynx even if restricted nvidia driver (v195.36.24) is installed and activated. Actually 3D effects were working with compiz etc, but at a given moment -not sure if after the final release of the 10.04 - they stopped working, and now it always fails to enable them.
View 1 Replies View RelatedI just install FC12 after all settings are done I install nvidia driver for PAE kernel whit the command # sudo yum install kmod-nvidia-PAE after reboot the system is not able to boot again.What I can do to uninstall the driver?
View 1 Replies View RelatedI'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies View RelatedI'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences.
Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
Just installed a Sparkle GeForce 8400 GS on my Dell Dimension 2350 running FC9. As stated, every time the system goes to start the card, a stack trace occurs. I know the first thing that everyone will ask for is the output from the stack trace, but for the life of me I can't capture it. Tried grabbing the STDOUT and SDTERR from the 'service start' command, but nothing interesting is ever there. If anyone knows if and where such things get stored, just letting me know that would help. I assumed there would be something in /var/log, but no. For some reason, there's a lot of python errors in the output. I imagine I could try to type in as much of the output as possible, but I'm hoping someone has seen this before.
Anyway, I've tried the Nvidia install executable, the nvidia-newest RPMs, the nvidia-96xx RPMs and they all fail the same way. I also can't get the card to come up as the primary device on boot, which I don't think should be a problem since they all boot into VGA mode, don't they? If I disable the internal video setup in the BIOS, the machine freezes on bootup with blinking lights on the keyboard, which I imagine is the BIOS's way of telling me there's no monitor available.
I also tried getting the nv and nouveau drivers going with no luck. They are installed on the machine, but I'm embarrassed to say I don't know how to get them configured. Not really a driver guy, I guess. Also, the reason I installed this card is to get TVOUT, and I don't know if generic drivers will have support for that sort of thing.
At this point, I'm just looking for a way forward. One thing I remember is that when I removed the 'fglrx' drivers (because they conflicted with the NVIDIA stuff) I remember that a few python/fglrx based packages went with it. I'm wondering if that could be at the root of the failure, given the python errors in the stack trace.
I just got a new computer and I have been busy setting it up with openSUSE 11.2. I am trying to install the Nvidia proprietary driver for my graphics card, a Geforce GTX 260, but it will not work. I added the Nvidia repository and I am installing the driver for GeforceFX series cards but every time I restart I get a command prompt and if I try to start x it says that my card is not supported. This is really getting frustrating, I need the proprietary driver so I can play DDO with Wine.
View 2 Replies View RelatedI just installed the only Nvidia driver available in the software center for Ubuntu. I'm running Ubuntu 9.10. I don't know which Nvidia driver I installed, but the screen resolution the Nvidia driver tried to set fails at login, so now I'm stuck booting my computer into the terminal. . I used sudo apt-get install xerver-xorg in attempt to restore the screen; however, the xerver-xorg package cannot be found. How do I restore xerver without reinstalling Ubuntu? How do I restore my original driver?
View 9 Replies View RelatedWhile installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View Relatedi installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
EDIT, 3 January 2010: SOLVED: In fact, it was the fonts that were being rendered larger and pushing everything out. Altering DPI in xorg.conf solved the problem, see details at bottom.ORIGINAL POST:I used jockey-kde to activate the nVidia (closed-source) driver in order to fix some full-screen problems I was having.It has fixed that, but now everything is really big. I have my resolution set to 1680x1050 but it appears to be lower than it was before - the K menu, for instance, takes up about 1/6 of the screen when I open it. I took a screenshot here:http://i.imgur.com/94lyN.jpgI know this isn't much information, but can anyone tell me why - while the desktop appears to be larger with a higher resolution - applications are actually appearing as though the resolution is lower?
View 7 Replies View Relatedopensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedI Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.
I have a priitty high spec pc with the nvidia 260 gtx.
just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686
so now:
I had fedora 12 working nicely and tried to add Compiz. That has caused my laptop to hang with the cursor blinking. I can get to the virtual windows with Ctl-Alt-Fx keys. However I am not sure what to fix.I had run Dmesg and it is complaining that it can not locate the Nvidia driver. I believe it mentions Nvidia.ko but will need to verify that.My thought was that if I just did an "upgrade" maybe that wold restore the GUI and I could go forward from that. I am trying to get awaay from the MS world.
View 1 Replies View RelatedThe freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedI am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.