OpenSUSE Hardware :: NVIDIA Driver From NVIDIA Repository Supports Cuda?

Jul 29, 2010

Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?

View 2 Replies


ADVERTISEMENT

Fedora Hardware :: Nvidia Developer Driver With CUDA Support?

Sep 29, 2010

I apologize if this is a duplicate post but I was unable to find anything that addressed my question. Currently I've installed the nvidia developer driver (beta) found here:[URL]..

After installing the driver everything works correctly. Rebooting the system results in a hang prior to starting X. Opening a new console and running start X provides me with the following error:

Code:
[ 103.884]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[ 103.885] X Protocol Version 11, Revision 0
[ 103.885] Build Operating System: x86-10 2.6.32-44.el6.x86_64

[Code]..;.

At this point if I reinstall the driver and reissue startx, again the system starts up properly. Also I've noticed that after a reboot, my xorg.conf file is being overwrriten.

View 1 Replies View Related

OpenSUSE Hardware :: Short Freeze's On Machine's With Nvidia-Card & Nvidia-Driver?

Aug 8, 2010

The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.

System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,

View 6 Replies View Related

Debian Hardware :: Any Chance To Get CUDA On NVIDIA GPU?

Feb 5, 2016

In this link is explained why I cannot. [URL] ....

View 0 Replies View Related

Fedora :: Nvidia Cuda Sdk Examples Won't Compile

Sep 13, 2009

I'm tyring to compile the CUDA SDK examples on Fedora 11. Only a few of them compile. The rest fail with messages like:

[code]...

View 6 Replies View Related

Fedora :: Nvidia Cuda 3D Kernel Nightmare?

Aug 14, 2011

I've been trying to get the Nvidia drivers from the nvidia site installed by running-devdriver_4.0_linux_64_270.41.19.run

I have a GeForce 210 PCI Express DDR3 graphics card. I've recently screwed an old version of fedora trying to do this and ended wiping it and installing Fedora 15. I managed to get the standard setup working nice with dual screen support and Tux Kart working smoothly which has never happened before with ATI cards.

The reason i've tried to get an NVIDIA card working is so that i can try to do some development with CUDA. To do this i need to get the proprietary driver working. To get the install program working correctly i've edited the kernel options in grub.conf to stop nouveau driver which seemed to work. The next step i got onto was the need for the kernel source which i've installed. The program can't find this, even with a load of Symbolic links giving-

/usr/src/linux-2.6.40-4
/usr/src/linux
/usr/src/2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4
all pointing to-
/usr/src/Kernels/2.6.40-4.fc15.x86_64

After following the steps of dozens of guides, i now cannot run games that need 3d support and i'm no further in getting the proprietary drivers working. Coding in CUDA is a distant dream after weeks of faff in my spare time to go 2 steps back and one forward...

Does anybody know how to do all this? If anybody could help me i'd be very grateful. I've never had decent graphics support in linux. Everytime i've tried it's ended in a horrible mess!

View 14 Replies View Related

Fedora :: Get The Nvidia Development Drivers Working - Don't Allow CUDA

Aug 16, 2011

I I have been trying to get the Nvidia development drivers working for a good day or so.

I have the 280 drivers installed, but these don't allow CUDA development.

View 6 Replies View Related

Ubuntu :: Desktop Effects Not Working On Nvidia CUDA 260.19.26 Drivers?

Feb 17, 2011

I am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:

1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation

[code]....

View 1 Replies View Related

Hardware :: NVIDIA 8800 GTS - Dual Boot Fedora 10 Does Not See The NVIDIA Driver

Feb 5, 2009

I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.

Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.

I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.

Here are my specs:

CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W

It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.

I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.

View 1 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

OpenSUSE Hardware :: NVidia GeForce2 GTS / Pro Driver - Failed To Load Module "nvidia" (loader Failed, 7)

Feb 17, 2010

I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"

[Code]....

View 9 Replies View Related

OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver

Jun 13, 2011

There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.

Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.

View 9 Replies View Related

OpenSUSE Hardware :: Using The Nouveu Driver Or The Nvidia Binary Driver?

Mar 12, 2011

How do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:

Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]

[Code]...

View 2 Replies View Related

Fedora Installation :: Lost NVIDIA With F13 Upgrade / Error Cannot Retrieve Repository Metadata (repomd.xml) For Repository?

Jun 9, 2010

I updated my up to date F12 to F13. I have what must be a 640X480 display with no way to change it. I get an error:

"Error: Cannot retrieve repository metadata (repomd.xml) for repository: pgdg90. Please verify its path and try again" on all Yum commands so no yum installs are possible. I don't have the /usr/bin/GLX command So theAIGLX doesn't work.

View 1 Replies View Related

OpenSUSE Hardware :: Suse 11.0 Nvidia Software Repository Not Working When The Updater Is Run And Gives An Error

Oct 23, 2010

Suse 11.0 nvidia software repository not working when the updater is run, and it gives an error message which indicates it must be out dated and no longer used. Here is the site in my repository for nvidia; [URL], I did try to add a new nvidia repository site with that Yast tool, but I could not get it to fully work. The new one I did find was as a ftp type, not [URL]. With this older Suse 11.0, and kernel 2.6.25.20-0.7-pae, then is it true that there may not be any more nvidia display driver updates available.? So then I should just remove that nvidia repository from the list, and be okay if the kernel does not update too much newer version, right ?

View 4 Replies View Related

Software :: Distro Which Supports Gnome And NVidia GeForce 9600?

Jul 21, 2011

Can anyone recommend a good fairly current distro which provides Gnome and well-supports an Nvidia Geforce 9600 GSO card? It appears the current versions of Ubuntu 10.10 and Linux Mint 11 do not, meaning they are now useless to me.

View 4 Replies View Related

Ubuntu Multimedia :: Driver Showed The Nvidia 173 Driver And The Other One Showed "current" Nvidia Driver

Apr 22, 2010

i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.

after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.

View 3 Replies View Related

Debian Configuration :: FATAL: Error Inserting Nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No Such Device

Mar 15, 2010

I'm trying to install the nvidia drivers but it is not working.

lspci | grep VGA

02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)

My xorg.conf looks like this:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.

[code]...

And after that my X is not working. And when i try sudo modprobe nvidia I get this:

FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device

View 2 Replies View Related

General :: Version Of Fedora That Supports Nvidia Riva Tnt Display Adapter?

Aug 12, 2010

I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.

DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15

CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock

I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.

The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.

I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen

At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.

View 8 Replies View Related

OpenSUSE :: Running A Nvidia Gtx260 And Have Installed Nvidia Drivers For Series 6 And Up?

Jun 9, 2010

opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.

View 9 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

OpenSUSE Hardware :: NVidia Old Driver Traces ?

Jan 13, 2010

I tried it on my machine, just for lols, and was surprised at the result. I have nVidia driver 195.22 installed the "hard" way (We really should stop calling it that, it is simple pimples!) but:

Code:

Or leave them alone?

Code:

Code:

Code:

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia Beta 195.30 Driver Gone?

Feb 26, 2010

I'm setting up Suse 11.2 on PC w/ an Nvidia GT 240. I used the 1-click installation, found it didn't work, then discovered this thread saying the 240 requires the newest beta driver, 195.30, which is not available yet in 1-click and has to be manually installed.

However, that driver is no longer available on Nvidia's download site, either through their menu or the direct link given in the forum thread:

Unix Drivers Portal Page [URL]

Nor do I see it in the Nvidia repository.

why it was removed? Is there a major problem with it? If not, any idea how I can get it?

And if I can find an install it, I assume I need to first uninstall the 1-click version?

nvidia-gfxG02-kmp-desktop (190.53_2.6.31.5_0.1-8.1 (x86-64)
x11-video-nvidiaG02 (190.53-9.1 (x86-64)

View 9 Replies View Related

OpenSUSE Hardware :: New Nvidia Beta Driver 195.36.08?

Feb 27, 2010

Installs the "hard way " without problems Games run quicker rendering is better Video card hier is EVGA 9500GT 1gb ddr2 standard clocking Pcie bus overclocked to 110 mhz

Where to get : [URL].. The readme gives the documentation and which chips it support

View 8 Replies View Related

OpenSUSE Hardware :: Potential For Nvidia Driver With KMS?

Jul 15, 2010

I've got 11.3 going and I am mostly enjoying it. I was thrilled when I noticed that with KMS, I could see the boot process and the other vterms on my external monitor. Sadly, the nouveau driver doesn't seem to work for KWin/KDE compositing/desktop effects. Additionally, VDPAU was no go.

So, I set the nomodeset option for grub and chanked the KMS option in the sysconfig settings. The nvidia driver now works (along with composite/VDPAU stuff).

That being said... knowing I could have my external monitor work in those other areas of use is really bugging me.

I don't know much about KMS... is there any process (or if not, foreseeable future) where I could use KMS and the nvidia driver?

View 7 Replies View Related

OpenSUSE Hardware :: NVidia Driver Configuration In 11.2 Kde?

Jul 24, 2010

I get this error on enabling nVidia repo and downloading driver from YaST.

Code:

Switching the use of "nv" driver of X.Org to "nvidia" driver of NVIDIA
------------------------------------------------------------------------
head: cannot open `/etc/X11/xorg.conf' for reading: No such file or directory
SaX2 generated xorg.conf not available!
grep: etc/X11/xorg.conf: No such file or directory

[code]....

View 9 Replies View Related

OpenSUSE Hardware :: New Nvidia Beta Driver 260.19.06?

Sep 15, 2010

Nvidia adress: [URL].. The new driver installed and no problems here this driver is better then the 260.19.04 with Sauerbraten and Nexzius a bit higher fps The readme gives all the cards for this driver to much to put here.

View 1 Replies View Related

OpenSUSE Hardware :: NVIDIA 270.41.19 Driver Has Been Released?

May 21, 2011

You can get the 64 bit version 270.41.19 of the nVIDIA proprietary Video Driver from this link:[URL]..

And the new video driver from nVIDIA no longer is outputting any error message when it is installed as was the case with 270.41.6. So, it is worth a try I do believe to go with the new version. I have a bash script that can be helpful in installing this driver if you would like to use it. Read about lnvhw from here: LNVHW - Load NVIDIA (driver the) Hard Way from runlevel 3

View 8 Replies View Related

OpenSUSE Install :: GUI Not Getting After NVIDIA Driver Installing In 11.3

Jan 8, 2011

I installed on my laptop NVIDIA driver from the opensuse repository. After restart i am not geting the GUI.The screen blinks while booting and finally ends in command line login. Error shows that gdm lasted for only few seconds. Max number of try exceeded.

HP pavillion ZV5000
64b processor
NVIDIA GEForce4 440 64m

View 1 Replies View Related

OpenSUSE Hardware :: NV CUDA Driver And Kernel 3.0.4?

Sep 4, 2011

I've spent about 3 hours yesterday trying to get my GeForce 210 with CUDA DevDriver running on the 3.0.4 kernel. It was running w/o problems on 2.6.39-desktop (with dev-src for 2.6.37). [yeah, I know I should stick to what works - but I don't like it]

After uninstalling the old drivers I tried several ways for an installation of the new ones:

1. ./devdriver_4.0_linux_64_270.41.19.run on the new kernel (even manually navigating to the kernel-src folder)

2. ./devdriver_4.0_linux_64_270.41.19.run on the old kernel, with new dev-src &c.
3. XFree 280.16 driver on the new kernel with the new dev-src &c.

The results:

3. Works now.

2. did not compile telling me the source files were missing (obviously, as they were for 3.0.4 and not 2.6.39)

1. Aborted the installation with the following (excerpt from nvidia-installer.log)

[Code]...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved