I've installed Debian (Lenny) on my pc, with geForce 8500 GT, two monitor (LCD + CRT). i've correctly installed the driver i can enter in the nvidia's setup but:
1) the best resolution for my CRT (Sony Brillance 109P) is 640x480
2) video on LCD (LG Flatron L222WS) is no good bat I can setting different resolution
3) I can't save the XConfig cause i don't understand what permission I must have for writing on 'etc' folder
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies View RelatedI seem to be having trouble watching video on my new debian lenny system. I installed the nvidia drivers correctly and I get the splash screen and have decent 3D performance but you tube is a real eye ache to watch with fits and jumps all the time. Is there something I am missing with regards to configuring this device.
Some info:
AMD64 dual core
2GB Ram
Nvidia GeForce 8500 GT PCIe
monitor resolution at 1280x1024
debian lenny (stable)
I'm a first timer on Ubuntu and I have a little problem with my Nvidia graphic card. After lots of attempts I can't get the 1280x1024 resolution that both of my monitors have. Instead I'm running on 1024x768.Is this a way to fix it?
View 8 Replies View Related just installed slackware 13.37... i did a bit of configuration by myself but im having trouble making my graphics card running correctly under X.I installed the latest drivers correctly from the nvidia website.
Here's the lspci:
Quote:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
[code]....
Right now with this .conf im able to start up X but find it not accelerated...
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
I've been trying to get it to work on my laptop off and on for several years now, experimenting first with Redhat (version 6.1, I think) and now trying with Ubuntu 9.04. I've done a full install using the entire hard drive (no dual boot). So I'm trying it for real this time. I'm having a problem with my video drivers. The video is ok (not great) and I don't seem to have any options to adjust it.
When I go into system > preferences > display, I see monitor "unknown", set at 1024x768 with a 75 Hz refresh. If I click on "detect monitors" nothing happens. It says under system > administration > hardware drivers that "no proprietary drivers are in use on this system". I've got two options:
[code]...
For the first part of boot, I have access, but then when it comes up into Ubuntu, the big monitor (a Dell 2500, I think, plugged into the stock Toshiba docking station via DVI) quits working, and all I have is a dim picture (dark, like something's sapping power from it) on the laptop display.....
I have a Slitaz 3.0 install on a UBB stick (via tazusb). It uses the cooking version. After a boot, all seems to be working except for the keyboard. Not a good start. Nothing wrong with the keyboard (typing this in Ubuntu and no probs in XP) so must be something wrong in Slitaz.
View 2 Replies View RelatedI am trying for Redhat certification on RHEL 5.4. When i tried to install it on my Acer laptop with NVIDIA GEFORCE GO 7600, I was only able to install it in CUI mode and no GUI. From NVIDIA website I tried both the newest and oldest version they have for Linux, which is with .run extension. I tried installing it using sh <drivername.run> and it is starting the wizard, but exiting abruptly, with a kernel error.
How to work around on this issue? Any generic driver that would work for this display adaptor? whether version 5.5 would work with this card?
i using sony vaio sz440 t5500 and installed fedora 12,but it cannot enable 3D on fc 12
Code:
lspci | less
01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1)
Built a custom pc using a Gigabyte mobo and amd processor. Mobo has onboard video. Ubuntu Maverick installs fine using on board video but when I put in the Nvidia Geforce GT 240 I get either no video or scrambled video. I've tried disabling the on board video and still no luck. I've also tried to install nvidia drivers first, and will get it to work but video is not crisp and will not show all of the screen.
View 4 Replies View Relatedi wanna learn so much of it as much as I do in Windows System. I have downloaded the video driver but when I installed it in Terminal some error occured after i press the enter key..
You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL].. is someone know how to solve this issue?
I purchased a new computer and I am trying to boot up gparted to partition the HD for installing my Linux Distros, but it gives the famous error Quote:
input signal out of range. So I tried booting up some other live cd's, some give the same error as above and some tell me that the resolution or refresh rate in wrong. Of course using a live cd I have no control over that. I also tried three different monitors that have run Linux just fine on other computers.
My only thought that I could come up with is the NVIDIA Geforce 7050 graphics is not compatible with Linux. Can anyone confirm this ? Or is there something else I can try ?
I am thinking of buying a Lenovo IdeaPad Z360, it has a GeForce G 310M.
I can't find much info on Linux support but an Ubuntu thread seems to suggest it isn't good. Can someone confirm that this card works with the latest nVidia drivers on Linux (Arch in particular)? It'd be even better if you had the Ideapad Z360 and could report on any other hardware problems I might have?
NVidia seems to say they have support (listed without the G however), but I've heard conflicting reports and so would like to check.
EDIT: I also found these:
[url]
[url]
Does the Z360 have optimus and the Z560 not so? I can't detect that either of them have it but occasionaly, someone says that they do. Can anyone confirm this? I thought the only real difference was the screen size.
I am trying to build a linux box from an old Dell Optiplex GX240 that I got for free. I have gone out and bought a Sparkle Nvidia GsForce 8400 GS PCI video card for it but am having trouble getting it installed properly. It seems that the card is not recognized by the computer. The command lspci shows no signs of the new video card. I have installed the lastest Nvidia driver (huge PITA) but as expected this did not change the fact that the computer cannot see the new card. The card is rated for 350W and I have a 500W power supply so I should be good there. I have also changed the BIOS settings to auto detect the video card instead of just the stock one. Is my card simply incompatible with my motherboard or are there ways to get this card to work?
View 8 Replies View RelatedForgive me if this was already posted but I couldn't find it. I am attempting to install F10 on my Acer Aspier 8730-6031, but I have video drive compatibility issues with my 9300m. Does anyone know of any drivers for this card or any fixes?
View 2 Replies View RelatedI want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.
View 1 Replies View RelatedI just installed F13, congrats to the community for the awesome work - everything worked straight out of the box .
Unfortunately, I need to install the proprietary NVIDIA driver for my job (CUDA stuff). I first installed F13 + kmod-nvidia from Fusion on a machine with a GeForce 7200GS, and everything works ok (after turning nouveau off).
Then, I proceeded to update another machine featuring a GeForce GTX280 (again, nouveau blacklisted). The install was apparently successful, but X turned out to be extremely unstable and always crashes a few seconds into the session, either by leaving a blinking screen or by causing the machine to reboot. Thinking that some file might have ended up corrupted, I reinstalled F13 and tried nvidia-graphics from ATrpms. The result was the same: computer hanging a few seconds into the X session. Finally, I installed from the NVIDIA sh package, and again same outcome .
The card is most likely ok because I ran it with F10 till yesterday flawlessly, so I can only guess that it is the new version of the driver coming broken from NVIDIA. I tried installing version 185.18.36 but it cannot figure out the version of my kernel headers, and the legacy versions available from the repos do not support the GTX 280, so I cannot be positive about version 195.36.24 being bugged.
Both machines are x86_64 (a Phenom II and a Core i7). Especially, does anyone know how I could get version 185.18.36 to run on F13?
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
I downloaded drivers for my nvidia geforce 9400gt for linux, ran it in terminal and it said failed because i have to run it as root. how do i go about doing so?
View 8 Replies View RelatedI recently bought a sony vaio laptop, with nVidia GeForce 310M device.
I am new, and not very good with ubuntu. I downloaded a driver version 185, and installed, after installing which, I could not get any display at all. After trying to repair, in vain, I had to reinnstall the whole system.
I really need the correct drivers. I can see a version 190.42 of nvidia drivers, but that doesnt list my device model number, and so im not sure, whether this should work. Someone, also please tell me how do I repair, if I mess while trying this driver out?
I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies View RelatedWhat are the best drivers for Nvidia GeForce 8800 GTS. I'm not 100% sure, but I heard the newest drivers have buggs and aren't 100% compatible with 10.10. I was wondering what the best version of Nvidia drivers would be to install on 10.10? apt-get install?
View 1 Replies View RelatedI first started having problems on 10.10 a few days ago. Just boots to a command prompt. After troubleshooting, I found when I remove xorg.conf gnome starts up. Under System>Preferences>Monitors shows my correct Monitor model and resolution.
The resolution displays properly, 1680x1050, but without Nvidia and Graphic acceleration, I can't run my Compiz effects or XBMC. I'm having the exact same issues with 11.04. I ran nvidia-xconfig as root to get an auto gen xorg.conf. No change. GeForce 6150SE nForce 430 integrated graphics card
[Code]...
I've seen a lot of threads on this issue and combed through most of them trying to diagnose my problem and I've gotten REALLY close but with no complete success yet.I have a nVidia GeForce GTX 465 and I'm running HDMI out to my monitor. I have video but no audio. I can see the device in the Hardware tab of Sound Preferences but for the life of me I can't get it to play any audio (aside from testing with white noise).Output from aplay -l:
Code:
*** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[code]....
I just did a fresh install of Debian lenny and I'm having an issue with the display driver. The system is defaulting to 1600x1200 and it's not allowing me to change it to a lower resolution. The PC has a Nvidia geForce 7050 display card and the monitor I bought with the machine goes up to 1366x768 resolution. I ran the dpkg-reconfigure xserver-xorg but nothing happens, it's only giving me options to change the keyboard. There is nothing on the xorg.conf for the monitor settings:
Seletion "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Apparently, the install did not picked up the display card automatically. I also looked up the drivers for the adapter and downloaded the nvidia-glx_173.14.09-5_i386.deb file but, don't know how to install it.
I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies View RelatedI used the videocard Geforce 6150 nforce 430 (NV4C) without problems untill the upgrade to kernel > 2.6.32 and nvidia-drivers > 190.*. After the upgrade I can use only nv and vesa in the Gentoo x86_64 and in the Fedora 13 x86_64. When I try to install Geforce 8800 GT everything becomes good with free nvidia-drivers and with proprietary ones in both distributions. use this videocard with the kernel 2.6.33(34)* and nvidia-drivers 196.* ?
View 2 Replies View RelatedI just tried to install KDE in Debian testing on the machine with Nvidia Geforce 7300 GS using Nvidia driver (280.13-1). However KDE breaks when compositing is enabled, and the only way to make it work is to disable compositing. This problem seems to exist for a while already:[URL].. Is it really Nvidia's problem, or something with KDE? Is there a point in contacting Nvidia about it?
View 4 Replies View Related