I was thinking, is it possible to keep the internet connection on while in suspend mode? i mean that you could maybe use download something, or use something that doesnt use hdd?
View 4 RepliesIn Windows I can get my computer to resume from sleep mode by pressing any key on the keyboard. My keyboard is a Logitech G15 (USB).
How can I get this functionality in Ubuntu?
Is there a way to check what caused Ubuntu to wake from suspend mode?
Ubuntu 10.10 on a desktop.
Have tried disabling all BIOS wake events (and WOL).
Have ensured mouse doesn't move.
Need a way to know what caused it to wake. Happens 90% of the time, usually 3 seconds after it suspends.
Is anyone else having trouble with waking up from suspend mode? After bringing the computer (Dell Studio 1555) back from suspend mode, GNOME moves very slowly. Cursor is unresponsive for significant amounts of time - any open windows do not respond to selection... Effects don't usually go away until a reboot is performed. This evening, one such restart resulted in a crash, where the shutdown process locked at the attempt to shut down the mouse/pointer module..
View 3 Replies View RelatedI have never had a working suspend. But ... every year or so I try it DOH!!! to see if the updates have solved itI used suspend mode today, and when I woke the system up , all seemed fine untill I tried to browse the internet.It told me I was offline. no ammount of clicking "go online" would work.So, then I noticed the network connection was broken.I did a few things to get connected, and I want you all to tell me what I need to put back again ! IPV4 and IPV6, I unclicked the box to require this for connection to complete.Somewhere else, there was a list of servers to ignore. I removed them all. (I think there werre 3) one was localhost another was similar, and the third was a number.I just want to know what these should be set at, because just because it works - doesn't make it right
View 6 Replies View RelatedDisclaimer: I have very little linux desktop experience...I've only used command line stuff for work in my previous life. I am joyfully coming off of a long addiction to MS but am having a bit of a hard time adjusting.
ISSUE: I can't seem to figure out how to turn off suspend mode. I have turned every setting I could find in the power management to "do nothing" and I have turned off all of my power mgmt options in the system bios. A "friend" suggested I remove HAL...which caused me to lose my secondary internal HD and all of my usb devices...and the issue persisted. Every 20 minutes of no action the screen blanks and my monitor goes into standby mode which is making watching movies in bed a less than relaxing experience.
Some background that may or may not be useful: I installed kubunutu 10.04 (2.6.32-28-generic) from cd on a fresh HD. Initially I had issues with the wireless network and alsa/pulse sound. I worked through those through much trial and error but the suspend issue persists. I've uninstalled and re-installed lots of packages I probably shouldn't have been messing with and would really like to avoid a reinstall as this seems to be the final fix I need to get things running the way I want them.
Just curious if this is possible. What I want to do is setup a rsync job to backup my laptop to my personal file server(same LAN), but I want it do do this at 3AM while I'm sleeping. However I always close my laptop lid when I'm done using it which puts the laptop into suspend mode since that's how I configured my power options in gnome. Since I don't want to leave my laptop powered up all the time, I was wondering if it is possible to have a cron job scheduled that will wake the laptop up(out of suspend mode) and run my script/backup job, all without opening the lid of the laptop, and then put it back into suspend mode when it's done. Is this possible, and is it as easy as scheduling a cron job or is there some other scripting/configuration/trickery that I need to do to accomplish this?
Also, my laptop's BIOS has the option to power on at a scheduled time if needed, but I'm not sure if that would work with it being suspended(hibernation is not an option since my entire HD is encrypted with LUKS and I would have to be present to enter the password to boot the system.).
it is a macbook pro (5,3) running sid.when i am using it, it is cool.however in suspend mode, it gets very hot.i have this running
Code: Select all/etc/init.d/macfanctld status
● macfanctld.service - LSB: Apple MacBook (Pro) fan control daemon
Loaded: loaded (/etc/init.d/macfanctld)
[code]...
Title says it all. I close my laptop lid. It goes into suspend mode. I open it up again, the computer powers up... and I see a black blank screen. No key combinations seems to bring anything back.
View 9 Replies View RelatedI have ubuntu 10.04 installed. I have a problem when my usb IR receiver is connected, than suspend mode isn't working. System will jump into black screen and that's all. Only hard reset works. I tested this problem also on ubuntu 9.04 and situation is the same.Is there any way how to force suspend mode without "looking" on this device? Do you need any log file to trace reason of this problem ?
View 2 Replies View RelatedAfter fixing an issue with sleep mode, my WiFi is automatically disabled on my Ubuntu installation on boot while the switch is on. For some reason, it seems that Ubuntu has an issue communicating with my BIOS. As a fix to this problem: I disabled the C4 sleep state. My Ubuntu installation now boots up fine but the LED on the WiFi indicator glows orange, indicating that it's off; while in Windows it glows blue, indicating that it's on.
View 2 Replies View RelatedI've configured my debian lenny to load first the command line, then if i want I load the X server, but doing this to that way I don't have the suspend/hibernate functions from the gnome menu, so, my question is:
what is the command to suspend / hibernate my system at any moment I decide?
I've tried ubuntu, kubuntu, fedora and linux mint. all 64 bit versions. I've also tried to suspend through applications like acpitool. But nothing works. When I click on Suspend, the screen goes blank but the computer is still running. The wireless network adaptor gets disabled for a second and then comes back on. All I have to do is press a key and I get the unlock screen prompt. Basically, suspend works like 'Lock Screen'. I have a HP Pavillion laptop. Core 2 Duo @ 2 GHz and 4 GB RAM.
View 12 Replies View Relatedsince ever, i face the problem, that i cannot continue using my computer properly after i suspended it to ram and wake it up again.Fedora 14, 64-bit, most recent and stable kernel
mainly KDEMotherboard: Gigabyte P55A-UD4Hard DrivesSAMSUNG HD501LJSAMSUNG SP1213NI can figure out, that everything works fine, but with a severe delay.Having a look at my led, signifying hard drive activity, it flases once a second for approx 10ms. frequency is very constant.so i performed several checks:firstly, hdparm -i, there is no difference before and after sleeping mode:
Code:
[root@bobbl-pc bobbl]# hdparm -i /dev/sda
/dev/sda:
[code]...
My computer have ATI X600 graphics card installed, and I installed CentOS5.3.
Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.
Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.
Information about the card:
Quote:
I'm trying to connect to the Internet via my Vodafone phone in tethering mode, either directly or via wifi using a Netgear goggle but neither is working.
View 1 Replies View RelatedBelow is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
I followed this guide for my Acer Aspire One A150, and got wireless and suspend working fine:[URL]pendtoRAMThe only problem is that wireless is dead after resuming from suspend. I have to type:/etc/init.d/networking restart and after that everything works just fine and I get internet again.Is there a way to automate that process on resuming from suspend, so that I won`t have to type it manually each time?
View 4 Replies View RelatedIssues with one of the computers: 8.04 LTS, Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Compaq 610 laptop Seems that when the computer comes out of suspend there is no network. So switch off suspend and set screensaver. Same. If you leave the room for half an hour it happens even if they are both off. Have hunted for a fix but nothing's worked. Might have something to do with my NFS set up. This is kind of in two parts. Is the problem with the wireless module not restarting after suspend (how do I check for sure?) or Could my NFS network setup have something to do with the issue or separate problem? When I restart the network I get this error and it takes awhile:
[code]....
The server is a desktop and is not always on so laptop client sluggish and always throws this error when its off. Any way of getting rid of that problem? The other client on the network doesn't have that problem and still shows the share icons on the desktop when the server is not on. Just shows them as empty. On the laptop there are no icons if the server is off. Strange cos the two clients are set up the same way as far as I can see.
The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary
The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment
There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)
My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
I need help connecting to the Internet while in text mode p.s don't know why but my wireless card lamp for on doesn't light in text mode, i am using a mobile broad band to connect
View 4 Replies View RelatedI'm facing a peculiar problem with my Ubuntu 10.04. In the normal graphics mode, while connecting to the internet, it is showing "Resolving host" in the browser and never gets connected. However, when I boot the m/c in to FailsafeX Graphics Mode (under repair option), I can surf the internet. I think there might be some problems with the graphics.
View 4 Replies View RelatedIf I suspend this toshiba satellite, and the battery is or gets low it will wake from suspend to tell me that it will need to suspend due to a critical low battery. Which is pretty dumb. I've experimented with this by plugging and unplugging the ac adapter.
View 1 Replies View Related3 questions i have about "pm-suspend-hybrid"
1. is it possible to schedule this command in the same manner as shutdown ? eg sudo shutdown -h 60
2. is it possible to schedule the laptop to come out of suspend ?
3. i have a usb sound card (xfi go). when waking from suspend, the internal sound card is selected. i have to manually select the external sound card & for whatever reason, also unmute it too
I just installed Ubuntu 10.10 and the internet doesn't work in normal mode, but it works fine in recovery mode. I can't find the network icon on the menu bar of the desktop in either modes.
View 1 Replies View RelatedI've setup Squid3 running on Ubuntu 9.04 64-bit server, and configured it to act as a transparent proxy and setup my router following these instructions: [URL]
Everything works great as far as browsing, but my main goal was to cache large downloads (usually executables) that I download frequently. So I set the minimum to 300KB and the max to 100MB. The problem, though, is the cache is not being used. I can download a file at regular speed on one computer, and then try and download it again and it downloads from the internet again, rather than the cache, so the speed is no faster.
Here's my config file:
Code:
#Recommended minimum configuration:
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
[Code].....
I don't have any connection issues, but Firefox always starts in offline mode. I can uncheck it and everything works fine. If I close and reopen it Firefox switches back to offline mode.
View 4 Replies View RelatedI have problem with laptop installed Ubuntu OS. Laptop can't connect Internet when open again after standby Mod. It can't receive issued IP from Router.
View 2 Replies View RelatedI am a new user of Slackware 13.37 (KDE) on my laptop. Unfortunately, suspend to ram is not working properly. It worked the very first time I tried it, but has failed since. The computer suspend properly (light turns orange) but when I click any button it restarts computer and recovers journals.
View 2 Replies View Related