General :: Slackware - KDE Doesnt Display NIC Inferfaces?
Mar 10, 2011
Alright, so I have Slackware 13.1 x86 running almost perfect. My wireless and wired Ethernet seem to be working great; however, System Settings >> Network Settings >> Network Settings does not display any information except for the "Domain Name System" tab. In fact pretty much everything is grayed out. Kinda odd, right? As root "$ ifconfig -a" lists both eth0 and eth1 along with pertinent info like IP-addy, MAC, etc. So the cards are definitely detected by the base system. Oh yea, and wpa_cli lists eth1 (my Intel 2200bg wireless card) as an available adapter. However, wireshark does not list anything either. I cannot begin super-happy-fun-time analysis with wireshark unless i can select a given adapter. here is the relevant entry of my rc.inet1.conf
Code:
# Config information for eth0:
#IFNAME[0]="Marvel Wired'
IPADDR[0]=""
NETMASK[0]=""
USE_DHCP[0]="yes"
DHCP_HOSTNAME[0]=""
[Code]...
I thought maybe i needed to declare an IFNAME for the adapter and that would be what Network Settings or Wireshark detected but doing so just killed my network so i commented them out.
View 2 Replies
ADVERTISEMENT
Dec 12, 2010
here is my /etc/profile file:
Code:
# /etc/profile: This file contains system-wide defaults used by
# all Bourne (and related) shells.
# Set the values for some environment variables:
export MINICOM="-c on"
[Code]...
Note: i downloaded the tar.gz package vim, and did :configure, make , make install, all went well. what else can i do ?
View 12 Replies
View Related
Nov 23, 2010
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
View 8 Replies
View Related
Nov 1, 2009
Im using FF 3.5.2 and Slackware 12.2. On certain web pages, for instance www.slackware.com, Firefox doesnt display the background image, but instead displays multiple images of the tool bar of Firefox. It doesnt matter if I change the settings to allow third part cookies or if I tell Firefox to get images automatically. When using Konqueror, the web-site(s) appear normal.
View 5 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Mar 14, 2010
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
View 4 Replies
View Related
Jun 24, 2010
I just play around with apache and php, everything was working right, but, suddenly nothing works, I tried to open a terminal and nothing, Firefox and nothing, then I realized that the OS was freeze, my next step was restart the PC, and guess what, nothing happens, then I Wait, and wait and wait and finally turn off the PC, wait 30sec and turn on, then it shows the PC manufacturer, Ubuntu logo, Ubuntu wallpaper, and nothing else!!! :'( Where in the name of god is my login screen??
View 3 Replies
View Related
Jun 30, 2010
I used partimage to restore the MBR from a file. It completely wrecked my partitions. I now have 3, a 100mb, a large one and a 9mb. Windows XP complained and Windows 7 got an error trying to format on the middle drive. I then tried to install on the middle drive and it didnt allow me.
I cant install an os!
I tried:
And
No luck, i still cant repartition it.
View 2 Replies
View Related
Jul 24, 2011
So this picture will explain [URL].. So after i typejj java -jar RSBot-257.jar it should have to come ijj up.It doesent show any errors but doesent start.What to do?
View 1 Replies
View Related
Aug 3, 2010
i just got ubantu and want to delete vista btw ubantu only has 3.57gb how do i increase that to the full harddrive? also g parted doesnt allow me to delete vista???
View 10 Replies
View Related
Jan 17, 2010
Im such an idiot. I have no idea of how to use terminal on this computer. I tried to download the updated version of skype and now it wont work. Nothing happens and it says /usr/lib/libstdc++.so.6: version 'GLIBCXX_3.4.9 not found(required by skype)
View 13 Replies
View Related
Feb 28, 2010
my printer is not listed the type of drivers it mentions to download in plug and play.the drivers listed dont come close to the number(465cn).I have a brother mfc-465cnwhere do i find the drivers that will be compatible. generic diver listed didnt work or other numbers listed under the 'brother' or 'mfc' brandI went to the open printer website and my printer isnt listed there either. just brother and some other mfc's but nothing near what my printer is.
View 12 Replies
View Related
Dec 26, 2010
When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only
export DISPLAY=localhost:0 && xclock
export DISPLAY=localhost:1 && xclock
export DISPLAY=localhost:2 && xclock
[code]....
View 1 Replies
View Related
Dec 15, 2009
For some reason Fox News Video, does not work in FC12, but CNN BBC video are all fine and plays. Flash is installed.e.g. URL... results in just a black screen with a fox logo and no video.
View 14 Replies
View Related
Jul 9, 2011
I am not an expert when it comes to crontabs and linux but i can survive in its world :P I've modified a script i found on the net to do a simple crontab job. Basically its a backup script (backup_auto.sh) that in the end of it, it updates the crontab also.
Code:
i just put the crontab job of the script....
if [ $CRONJOB -eq 1 ]
then
#Check if user can use crontab
[Code]...
I know for a fact that it doesnt run it because this .sh upload remotely some files for backup, and if i dont run it manually then i dont see any backups on the remote server
View 3 Replies
View Related
Oct 20, 2010
I just upgraded to 10.10 version (32 bit) and istalled gmameui along with mame. Although when i try to run gmameui preferences the program crashes, it recognizes the roms and am able to play so it doesnt really bother me. The problem is that joystick works but not properly despite jscal calibration .My joystick is recognized as js0. I reinstalled "joystick" package but the problem persists
View 2 Replies
View Related
Oct 1, 2010
I have installed Ubuntu 10.04 .. normally and I installed also some programs; I had problems with the monitor and many times I shutted dow the CPU when I changed the monitor and turned on angain and appears a black screen:after
mount: mounting /dev on root/dev failed: no such such file or dir
mount: mounting /sys on root/sys failed: no such such file or dir
mount: mounting /proc on root/proc failed: no such such file or dir
[code]...
View 3 Replies
View Related
Apr 24, 2010
I have installed SW13 and I cannot seem to be able to configure my display resolution. Under windows I have it configure as 1440by900 pixels, colors = 32bit, chip = intel 965 express. Under SW the resolution = 800by600. I have try to change the resolution size but have not been able to do it. I try to run the xorgconfig command but is not installed on the computer.
View 9 Replies
View Related
Jun 28, 2011
I have the following scenario that doesn't seem to work normally. I have a windows 7 pc from which I am using putty to connect to my other linux servers (all running redhat 5 and 6). So here is the scenario that works and one that does not work. And I'm trying to figure out the one that does not work. Scenario that works:
From windows 7 (putty) I ssh into Linux_Server_1.
echo $DISPLAY
localhost:10.0
I run xclock and I see it pop up on my windows 7 pc. I am using xming on windows 7 to help me populate the display from linux to windows. One that does not work:
From windows 7 (putty) I ssh into Linux_Server_1. Then from Linux_Server_1 I ssh into Linux_Server_2.
echo $DISPLAY
<no output>
I try to setup $DISPLAY with localhost:10.0 or 0.0 or even my windows 7 pc ip address:0.0 ....etc Then when I try to run xclock I doesn't work.
I get these error messages: Error: Can't open display: <ip of display>
Also as a side note all our Linux servers are sitting on one subnet. My pc is sitting on another subnet. I use vpn to connect to the subnet where the servers sit from my pc.
View 4 Replies
View Related
Jan 14, 2010
When trying to run X apps from terminal command line I getCannot open X display `:0.0'error.I tried export DISPLAY=0.0What do I need to do to permently fix this problem?
View 1 Replies
View Related
Apr 22, 2011
Is there a way to tell conky on which display to start. I have dual twin monitor setup and its starting on my secondary monitor.
View 10 Replies
View Related
Feb 6, 2011
I am using a 64-bit Slackware 13.1 distro (I chose 64 by mistake, to be honest, as I know there's less trouble with a 32-bit distro) and I have some problems with my consoles (in text mode). After changing the runlevel in ininittab to graphic mode (4), I can't enter any of my consoles. Actually, only ctrl+alt F1 shows some output, regarding the graphic mode (I'm currently using KDE4, the default for slackware 13.1) and F6 is the only normal consoles I have access to. However, if I log out and log in (with another user, maybe) there's no output anywhere (not on F1, neither on F6).
View 1 Replies
View Related
Jul 23, 2011
what is the configuration file responsible for the X system !!! i did not have /etc/X11/xorg.conf file and the X server was pretty good and i can open it through "startx" command.i created xorg.config by "xorgsetup" program but i could not feel any change. i wanna reconfigure my display driver to be sure it's functioning at maximum performance.
View 8 Replies
View Related
Jan 11, 2011
I'm trying to run an Xwindow application from terminal but I'm unable to do it. What I did:
Code: oracle@firefly:/usr/local/temp/database$ export DISPLAY=:0.0
oracle@firefly:/usr/local/temp/database$ xhost +
No protocol specified
xhost: unable to open display ":0.0"
[Code]...
View 6 Replies
View Related
Jul 7, 2011
I'm using Slackware64 with the KDE desktop. Sometimes, when I start KDE, I have a strange display bug that affects the background. Not a serious bug, only annoying. Here's a screenshot to get the idea: [URL] Usually, it's sufficient to logout and log back in to restore things to normal.
View 3 Replies
View Related
Jan 14, 2010
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
Here is the command i use:
Code:
View 4 Replies
View Related
Dec 12, 2010
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
View 5 Replies
View Related
May 8, 2010
I'm trying to span my desktop across my 2 displays. I tried to edit xorg.conf-vesa to no avail.
Here is xrandr:
bash-3.1$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1600
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0*+
1680x1050 59.9
[code]....
I have attached a portion of xorg.conf-vesa and xrandr --verbose.
View 14 Replies
View Related
Feb 16, 2011
I run my conky as one bar at the top of the screen (Ratpoison). It is frustrating when % values jump between 0->10% for example and then the entire bar shifts. How can I make it display 000% 010% 100%?
View 7 Replies
View Related
Jan 1, 2010
If I click on the clock in the system tray, KDE presents me with the calendar December 2010... if I try to change the display by clicking on the month and selecting Jan, KDE crashes!
View 14 Replies
View Related
