my printer is not listed the type of drivers it mentions to download in plug and play.the drivers listed dont come close to the number(465cn).I have a brother mfc-465cnwhere do i find the drivers that will be compatible. generic diver listed didnt work or other numbers listed under the 'brother' or 'mfc' brandI went to the open printer website and my printer isnt listed there either. just brother and some other mfc's but nothing near what my printer is.
The situation:At my workplace there is a shared printer installed in WINDOWS. It's installed also in my windows system(WINDOWS 7 ULTIMATE version 7600). It's working very well. From windows I shared it to have the option for printing from openSuSE 11.3. In Samba I can see the other colleagues connected to the same workplace network. I shared also the printer with Samba.I can see it.
The problem :The printer doesn't work.I can't find a opensuSE11.3 driver for it (Samsung CLX 3170 FN).The question 1:Is it really need a properly driver for it if it installed in windows? The question 2:How can I make printing from openSuSE11.3 with the shared installed in windows server printer? Steps done:in MS Win system I shared ,I noted the WORKGROUP,the PC name and the IP for the printer. //ALso I know the domain and my IP.well done in resolv.conf,in fact I have internet connection from openSuSE 11.3,no problem,e-mail/evolution and kmail are working very well,configured both for the workplace). Now in openSuSE what should I do? I need some advices/right steps) about configuring this printer USING few ways(Samba,Printer config from YAST etc) because I am thinking somehow I did something wrong. When I make print test page the printer make the noise is preparing but nothing is happening. I believe that maybe the driver missing is the problem. BUT ONCE AGAIN,it's installed in my PC in Windows system,/I have dual boot system/GRUB MANAGER/openSuSE and Windows 7 Ultimate 7 7600. Can I work with the printer via internet/network //Samba/CUPS/etc,etc with localhost /IP,or other way if I DON'T have a driver for openSuSE
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
For some reason Fox News Video, does not work in FC12, but CNN BBC video are all fine and plays. Flash is installed.e.g. URL... results in just a black screen with a fox logo and no video.
I just upgraded to 10.10 version (32 bit) and istalled gmameui along with mame. Although when i try to run gmameui preferences the program crashes, it recognizes the roms and am able to play so it doesnt really bother me. The problem is that joystick works but not properly despite jscal calibration .My joystick is recognized as js0. I reinstalled "joystick" package but the problem persists
When i use the shutdown-command in the terminal as root, it nearly works. It starts to shut down, and it looks like all programs and the kernels shuts down. I end up with a black screen, sometimes with the ubuntu-logo on, but it never powers off. I have to force it off by holding the power button. When i use the graphical interface to shut it down, it works perfectly. The poweroff-command works without problem too.
I am using a server where i need to login twice. The first time i login as my boxname and pass. The 2nd login is 'root' so i can access the content of the box (i dont understand it but that hasnt stopped me from using it as normal).Now i like a GUI so i can browse files easier and drag and drop multiple files instead of using the command line. WinSCP doesnt work as it locks up. I suspect its because there is a prompt to log in again.
I have currently installed Linux Mint 10 Gnome 32-bit edition and I have a iPod Touch 2nd gen with 32GB.I was able to see the music(mp3 files) in my iPod touch in linux mint 8 and 9. But currently I have the following issues:When I connect my iPod Touch with the system I got two popup asking me You have just inserted digital audio player.ose what applications to launch"ou have just inserted a medium with digital photos. Choose what applications to launch"I know that these are popups are normal. I currently dnot have any photos or videos in my iPod Touch(will try to add them in the future) so I used Rhythmbox to open the music present in my iPod touch. I'm able to find my iPod under "Devices" in Rhythmbox. But when I click it, Rhythmbox shows that there are no music present in my iPod Touch by showing "0 artist" and "0 Albums".
However I know for sure that there are definitely songs in my iPod since I'm able to browse and play songs directly from my iPod. Is there any way to resolve this? I have also tried opening it in banshee but with the same result.I tried to drag and drop songs present in my library of rhythmbox to my iPod and this does not do any thing. Previously in LM 8 or 9, when I do drag and drop I will be able to see my new songs in my iPod.
I've got a problem with my wireless connection. I've recently installed Linux Mint Isadora on my Asus Eee pc R101 netbook and I now can't find the wireless drivers to get it work.
i'm running linux mint 10 lxde in the uk. i can't get bbc iplayer, other tv sites such as itv player, videos tv videos or any radio to work at all.every time on iplayer, it starts to load, and then i get an error message saying: content doesn't seem to be working right now, please try again later.i have a very good internet connection, latest flash, a whole load gstreamer codecs, mplayer plugins for realplayer, wmp uicktime, java and shockwave.i have to go through a university proxy, but iplayer works fine for everyone else here. i've tried with firefox and chrome, and i've emptied the cache several times
i have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
I am using 8.04 Sometimes, when I start some video or audio file, I cant hear the sound. Even if it is working some time back. Then it starts all of a sudden or mostly I need to do a restart.
i've come to replacement my 80 yr old fathers win98 machine with lucidFirefox 3.6.3 says 'connecting to .....' when accessing a webpage (eg his home igoogle page,bbc.co.uk ) and then times out .It all works with opera and links2 and pings are the usual times and its doing DNS . I've added 4.4.4.4 and 8.8.8.8 to /etc/resolv.conf for good measure FF its configured NOT to use a proxy ( Im fed up looking and checking !) and ive tried the 'detect settings automatically'this is a 'mission critical' step. Going to linux is a big enough change , so getting FF working will be a deal-breaker
Code: bahie@bahie-laptop:~$ sudo apt-get install screenlets python-rsvg [sudo] password for bahie: Reading package lists... Done Building dependency tree Reading state information... Done python-rsvg is already the newest version.
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
I have coriander-2.0.0-1.fc14.i686 installed and it does n t work anymore as it used to with my IIDC compliant ieee1394 camera.
I understood that raw1394 and video1394 modules are now deprecated. So firewire_ohci and firewire_core are loaded when I plug in the camera. There is no more /dev/raw1394 and /dev/video-0 streams, but now there are /dev/fw0 and /dev/fw1.
When I run Coriander, I receive: Erreur de segmentation (core dumped)
If I create the following link: ln -s /dev/fw1 /dev/raw1394
right now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
I have a computer that i wish to install ubuntu 10.04 on, it wont install tho, it tells me that it cant detect the cd rom (the drive it is booting from) and that i should insert a removable device with the drivers on it, except i dont have those and don't know where to get them. i cant boot from a usb but i have a usb with 10.04 on it just incase. i tryed this with both alternate install and desktop. i dont know what to do, i have invested 2 days to try and do this and i would really like to put this on my computer.
I have previously installed 8.04 on my computer with out such error and all of the hardware is the same (even the hard drive), and i lost the 8.04 disk. <(it was a live disk)
I am running xubuntu 11.04 (ISO from early this week). During install, I selected to NOT auto login but to present this gdm panel where I have to enter the password (or other users could log in).
Now I decided to enable auto-login (and to start the screensaver right afterwards) ... so I opened up the "login screen settings" (systems menu), unlocked that window and changed it to "login as xxx".
Then i rebooted and would have expected to be greeted with my screen saver on a logged-in session afterwards. But what happens is that there is a gdm panel sitting ... showing me
AUTOMATED login Other
Where the first item wont do anything.
So I have to select other and enter user name + password ?
I had some Problems with analog Modems.We have now new Server Hardware witch don't work with Suse 10.2, now we Upgrade to 11.2, but the Devolo Modem doesnt work with the Drivers vor 10.2, No Problem, this Modems are sold out, i had to search for other Modems.Now I Test an Softmodem with Motorola Chipset, Bad Luck.Then i Think, Try a Hardware Modem From US-Robotics, Expensive but working on Linux: USR802981-OEM But don't working on Suse 11.2.If you had some Other Modem (internal Pci) witch works for DialIn Data Connections please sent me Type and Configs
