Installed fine, logged in, but there aren't any panels visible on my screen, so I can't do anything. How do I resize the screen without access to the panels?
EDIT - Never mind, got it working.
I've already installed x11vnc and have it running well on my laptop upstairs. I can access my existing desktop session with no real problems, it works great. The problem I'm running into is the fact that I'm accessing my computer upstairs which is driving two 1920x1080 monitors, accessing it by VNC on my 1280x800 laptop (meaning I have to scroll a 3840x1080 desktop on my 1280x800 screen. I've looked into running multiple VNC screens, but this doesn't seem to be the best solution, and I don't know if I can do this with x11vnc. I know that I can run native VNC screens at different geometries, but I don't think that this helps much, as each VNC screen is essentially a new session running basically nothing.
A while back in my sys-admin days, I remember having to set up a desktop environment on a Fedora machine. What was cool was that each VNC screen I created launched the default desktop environment. It "just worked," no fuss. Mind you, it wasn't the same desktop on each screen, but it worked.
I am using Fedora 11 and when the system booted, the screen resolution and font size were increased all of a sudden. Then I configured the screen resolution using
Quote:
system-config-display
to the actual that I had.
But the fonts in gedit are still big. Although the settings shows the default settings that I search on several blogs i.e.
Quote:
Edit -> Preferences -> Fonts & Colors -> Use the system fixed width font (Monospace 10)
How come on x11vnc, with Fedora 12 PPC/x86/x64, my screen sizes can't be greater than 800 x 600, and they don't update when I change them in Displays. On my Ubuntu installations the x11vnc screen sizes update and can be basically any size selectable in Monitors.
View 1 Replies View RelatedI just picked up an AcerAspireOne AOA150-1777 netbook that I've loaded slackware 13 onto. I'm using fluxbox as my window manager. Screen resolutions look good, running at 1024x600, as I set in xorg.conf. My question is, some applications, (gimp/firefox are good examples) open windows that are too big for the screen. I was wondering if there was a way I can set apps to use the limits of my screen size.
View 2 Replies View RelatedI am running Fedora 9 in virtual box on laptop. Want to set Fedora display size so that I will not have to scroll up or down or sideways to view screen contents. Have tried a couple of options such a resize box and change from full size but these do not help reduce size of Fedora display. Am wondering if it as something to do with the rectangular size of laptop monitor???
View 5 Replies View RelatedI'd like to change the font characteristics (size, colour) on initial login screen (list of users) however I cannot find the configuration options.
View 6 Replies View RelatedI have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04.
The problem is that I would like to use a larger size display that is configured by default.
Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080.
This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation.
The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file.
I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily.
I have just noticed a nice feature in Windows 7 - when you drag a window to the edge of the screen (the mouse pointer must touch the edge), windows offers you to resize the window to exactly half of the screen size. This is actually very handy on the wide screen monitors.
Is it possible (and how) to configure Kde 4 to do the same thing?
How would one go about it? Follow the GNOME Ubuntu tips, the ones for Kubuntu, or both? Or would it be easier to just roll back to a GRUB that uses GDM's splash and login and see if the settings I've already attempted are really working (and it's just the KDE stuff that's blocking them).
View 1 Replies View RelatedI have installed fedora 10 successfully but when reboot the system after installation not initrd or vmlinuz load and display first blue screen and some processing show after this blank screen display and held the system please tell me what should I do? I have reinstall many times but the problem is same.
View 3 Replies View Related[root@zhuhaiping MPlayer-1.0rc2]#./configure --prefix=/opt/mplayer --enable-gui --enable-freetype --codecsdir=/opt/mplayer/codecs --win32codecsdir=/opt/mplayer/wincodecs/ --language=zh_CN
it's ok ,but when I configure like this
[code]....
But when I make there comes this problem which as follows ;
vo_ivtv.c: In function 'ivtv_reset':
vo_ivtv.c:79: error: storage size of 'sd' isn't known
vo_ivtv.c:80: error: storage size of 'sd1' isn't known
[code].....
is lvresize with --resizefs options re-size the Logical Volume and then re-size the file system? i mean we don't need to use resize2fs?I looked at man pages but it doesn't explain this option.
View 3 Replies View RelatedHow can we find the maximum size of the inode table and what decides it, and how the maximum size of volume of file system is decided ?
View 4 Replies View RelatedI'm new to Fedora! My problem is this, I was updating Fedora using yum, the updates were in the process of installing when I got up and tripped over my power cord and of course cut power to my computer killing it and interrupting the installation. I plug my computer back in and boot it back up. I make it to the blue Fedora loading screen with the blank Fedora symbol that fills with white while loading; loads fine but before the user login screen appear Fedora melts down. The screen goes black, the cursor appears with the circle loading timer, and some form of terminal is there were I can enter text but no commands like SU or whatever seems to work.
View 4 Replies View RelatedWhen I installed fedora I told the installation routine to use the free hard disk space. I had 98gb of free space. After the installation I look under the MyComputer icon checked the free space which is 45gb. Well I have a hard time believing that I have used half of 98gb already. There must be something going on here.Also.. With regards to the boot manager. It made Fedora the default OS. While I don't really have a problem with that is there a way to change it so that my other OS is the default? I use two operating systems and sometimes one week I'm using one primarily and then things will change.
View 5 Replies View RelatedI've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
I know its a long shot, but still...
Is it possible to change size of boot and swap without doing a fresh install?
this is how my volume dist is like - root -30 gb, boot 200 mb, swap 8gb, home - 110 gb
my laptop is an amd turion dual core TL-58, with 2 gb ram and 160 gb hard disk...
and i want to change it to what is generally recommended ie boot to 500mb or 1 gb and swap to 4 gb..
the remaining can be added to home...
I am planning to dual boot Bt4 + SL 6 or Debian 6 ( whatever comes first ) So i am wondering what will be the default disk footprint of Bt4... Never used it installed in HDD only in usb install or live mode...
View 7 Replies View RelatedI will install Slackware 13.1 on my desktop in 50 GB of disk space but I'm not sure about the proper size for the partitions "/" and "/ usr / local". I want to use most of the space for "/ home" partition, so I can keep my data when I upgrade to a newer version (right?)
View 4 Replies View RelatedI have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?
View 1 Replies View RelatedThis may seem to be a silly question, but I googled along
and found that most of relevant complaints was about
a bug in video card driver.
My problem is -
For some unknown reason, I can't resize the Konsole window horizontally while I can still resize vertically. This is bad as the corrent width of Konsole window fills the entire screen!
Running new installation of 11.3 with KDE Desktop. I have sorted out text appearance and size thanks to pwabrahams in another thread but I have a big problem with screen size/resolution.
In previous installation of 11.1 on the same machine I was able to change the resolution of the graphics in order to fit the windows on the screen more comfortably. I used to use something like 1240 x 1048 but in the System Settings > Computer Administration > Display the resolution is set at 832 x 624 and no higher resolutions are offered.
I cannot find out the details of the embedded graphics controller (10 year old Dell PE6300 server) but the system information report it as ATI Mach64 GI with swrast (No 3D acceleration) version 7.8.2. I have spent several hours reading the many pages on graphics in this forum and have concluded that I should probably be using a legacy driver but have no idea how to change the driver. Of course if it were possible to increase the resolution to 1240 X 1048 without recourse to changing driver that might do it if I knew what setting to tweak.
I've installed Ubuntu 9.10 Netbook Remix on my girlfriend's computer, and everything went fine except the computer *thinks* it's got an 11'' monitor when it's actually something like 10.2". As a result, since Ubuntu windows now relies heavily on the screen size parameters, everything goes "out of the monitor": browser window, background image, etc In System -> Display, I see it's set as an 11'' monitor...do you know how I can modify this value to be 10'' ? There used to be an Xorg.conf that one could edit to permanently modify these values but now it's nowhere to be found
View 5 Replies View RelatedI have recently upgraded to ubuntu 11.04 on amsi wind 100. i had ubuntu 10.10 netbook version. Since i have installed the new version in evolution i unable to add new email accounts, as the pop up box is to large for my screen and there is no side scrollbar.
View 1 Replies View RelatedStruggling to find right place to post, or for FAQs, or anything, because reading web browser is such a strain: can use Firefox v. happily in MS Windows, but, new to Linux and Fedora (14), I can't physically SEE where to start modifying appearance of either desktop or browser, which seem minute. I'm sure there's a really simple route if someone can just start me off.
View 3 Replies View RelatedI feel really stupid posting this, but I can't find what I am looking for. I feel like I have a decent understanding what is going on, but I am missing something very elementary. I have several mpc clientpro machines that are all in one's with 17" monitors built in. I can't get any resolution to fill the screen. I have been playing around with settings in xrandr, to no avail.
In windows xp it is usually ran at 1024x768 resolution which is supported. However there will be about 2 1/2 inches of blank space on the right side of the scree. and then another 2 1/2 inches of blank space on the bottom followed by about 2" of what seems to be a mirror of the top 2". I can change to several different resolutions all taking up different sizes of the screen, but nothing will fill it.
I understand I can't just do anything I like, like it would be unreasonable to expect the card to output 1920x1080. But can't I get it to at least fit the screen? Whether it was 1024x768 or 1152x864 or 800x600.
I have been searching and searching, and I think I am just simply misunderstanding a key term that is not allowing me to find more information on this. Something like panning, overscan, etc.
I'm running Hardy 8.04.. Once in a while when I boot up my system, all of my fonts are different - everything is very large. If I go into the screen resolution, I have no choices higher than 800x600. If I restart the system, there is a good chance that the screen resolution will go back to normal. what I can do to fix it?
View 1 Replies View RelatedI just downloaded Lucid Lynx to my desktop that is hooked up to my 60" Mitsubishi DLP television. I cannot find a way to adjust my screen size. Under display Lynx believes I have a 70" tv. I have tried changing resolution size. I can't seem to shrink it down enough even though I've picked some of the lowest numbers available. Is there an easier way to readjust the screen so that I would atleast be able to see my toolbars instead of guessing where they may be?
View 1 Replies View Related