Fedora :: Change Size Of Boot And Swap Without Doing A Fresh Install?
May 11, 2011
I know its a long shot, but still...
Is it possible to change size of boot and swap without doing a fresh install?
this is how my volume dist is like - root -30 gb, boot 200 mb, swap 8gb, home - 110 gb
my laptop is an amd turion dual core TL-58, with 2 gb ram and 160 gb hard disk...
and i want to change it to what is generally recommended ie boot to 500mb or 1 gb and swap to 4 gb..
the remaining can be added to home...
View 6 Replies
ADVERTISEMENT
Mar 12, 2009
I'm totally new to Linux. Got a fresh installation of Fedora 10 x86_64 on my HP dv7-1070el notebook with previously installed Vista Ultimate 64bit. I have 2 HDDs. The OS are installed on different hard-disks. The problem: I've chosen to put the boot loader on the first sector [...] on the second HDD (/sdb5) where Fedora is installed, not on MBR /sda1 where is Vista. Now, when I reboot, it goes straight to Vista and I expected to be asked for a boot choice.
What I want is to start using Fedora and to be able to choose which OS I want to use when I start my notebook. I'm not sure I made myself clear since I'm not too familiar with all terms so please correct me so I can learn . This is what I remember from installation. Everything else went great, no installation problems. If there's no way to get the dialog of which OS I want to boot, tell me the command for booting Vista when GRUB starts.
View 2 Replies
View Related
May 31, 2011
I installed fedora 15 and i m not able to change the monitor resolution. if I open the display settings I just get the choice between 1024x768 and 800x600.
View 3 Replies
View Related
Jan 13, 2010
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies
View Related
Jan 12, 2009
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies
View Related
Aug 21, 2010
My laptop has 2Gb of ram, 4Gb of swap, 40Gb hdd and an intel pentium 1.40GHz cpu, even when compiling stuff or maxing out everything the 4Gb of swap is never touched, with such a small hdd I'd like to reduce the swap to about 2Gb (just in case) to free up some space, does anyone know what commands/tools are available to accomplish this?
View 3 Replies
View Related
Apr 3, 2009
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
View 2 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Jun 8, 2010
Wubi doesn't let me set the swap file size, so on installation it only creates a swap file of a few hundred megabytes. Because of this, i cannot hibernate my netbook (eeePC 1005HA), which has 2 GB of RAM.
Creating a 2 GB swap file alongside of the original one using the tutorial here did work, but hibernate doesn't seem to work with it. For this reason i thought increasing the original swap's size instead of creating more would be a way to solve my problem.
View 2 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Jan 27, 2011
When I installed fedora I told the installation routine to use the free hard disk space. I had 98gb of free space. After the installation I look under the MyComputer icon checked the free space which is 45gb. Well I have a hard time believing that I have used half of 98gb already. There must be something going on here.Also.. With regards to the boot manager. It made Fedora the default OS. While I don't really have a problem with that is there a way to change it so that my other OS is the default? I use two operating systems and sometimes one week I'm using one primarily and then things will change.
View 5 Replies
View Related
Feb 23, 2011
I've chosen to encrypt my swap partition while I was installing opensuse 11.3 on my PC.
I want to know how I can change its password(passphrase)?
View 2 Replies
View Related
Dec 12, 2010
I have just installed Ubuntu 10.10 64bit on my Qosmio Toshiba laptop.
At the completion of the install i had about a page of errors. But it boots up ok. However when i tried to install Visual Paradigm on the system i found that every time i ran the executable i get an error message saying access denied. Found away around this problem on a VP forum so managed to get the program to work with the non-install version.
The problem i am having now is i can save files. I have checked the permissions of the vpworkshop folder (properties > permissions) and all permissions are currently set to '---'. If i try and change them to 'wr'. It just reverts back to '---'.
View 3 Replies
View Related
Aug 6, 2010
i want to set the shortcut so that alt+1,2,3or4 will swap between the desktops,
how do i do this i cant seem to find it under system->preferences
also how do i make it so when i scroll the middle mouse buttom on a windows title it goes to shade?
View 4 Replies
View Related
Aug 28, 2010
on a dual boot can one change the size of each partitioned section of the boot once both sides are installed ?i have a 500GB disc and i have lucid on 307 Gb and maverick on 145GB i did this so i could test mavericknow i would like to change the split to say half and halfcan i do this?i have mountmanager installed but i am not sure how to proceed
View 8 Replies
View Related
Jun 9, 2010
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies
View Related
Apr 16, 2011
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
View 4 Replies
View Related
Dec 27, 2010
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
View 8 Replies
View Related
Nov 24, 2009
I am trying to increase my swap size because it seems to be getting full and making my server lock up.
I've tried this: [URL]
But all I get is this:
# lvm lvresize /dev/VolGroup00/LogVol01 -L +8000mb
Extending logical volume LogVol01 to 9.75 GB
Insufficient free space: 250 extents needed, but only 0 available
vgdisplay gives me:
[Code]....
View 7 Replies
View Related
Oct 22, 2015
today I upgraded via official testing repository Gnome to version 3.18. After this, icons on desktop and nautilus are bigger, than before. Next thing, gaps between icons are smaller than before. I tried change theme to default (Adwaita), then run gtk-update-icon-cache, but without result.
Normal view - icons are big for this view. URL....
Small view - icons are still big for this view. URL...
How can I change icons size and gaps size? Or is it bug for this version?
View 2 Replies
View Related
Nov 5, 2009
I'm a student in a linux class and we just installed fedora. so far it's nice except that the work we do is in the CLI which I can barely see because it's so small on the screen! I've been squinting at the screen for a little while now but it's just proving to give me more of a headache and hurt my eyes than anything. Anyone know how to change the font size so that I can actually see the work I'm doing?
View 5 Replies
View Related
Mar 27, 2010
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
View 3 Replies
View Related
Sep 13, 2010
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
View 2 Replies
View Related
Mar 9, 2011
First off I just want to inform you that I've done a lot of research, used countless of hours on Google trying to figure out how to solve this problem I'm having. I'm installing Ubuntu 10.10 64bit with Wubi on the same partition I have Windows 7. And the error I get is the: "Alert! /dev/sdb1 does not exist."
I'm able to get into Ubuntu after waiting a couple of minutes and writing "exit" in the "initramfs".
This is what I've tried:
- Installing without Wubi, still the same problem
- Adding pci=nocrs
- Adding rootdelay=90 in grub.cfg
- Changing the root location to "/dev/sda1"
- Tried using the uuid
[Code]...
"fdisk -l" shows sda1 and sdb1-3. In the boot selection screen Windows seems to be on the "sdb1" as it says "Windows 7 /dev/sdb1", and I thought as I installed Ubuntu through Wubi on the same exact partition that would be the correct root path, but obviously no. Does anyone have any idea what might cause this problem I'm having? Seems like a lot of people got this out there, and this is making me mad!
View 4 Replies
View Related
Jun 7, 2011
I just performed a fresh install of 11.04 Server. The installation went smoothly and as expected. As soon as I leave the BIOS and Ubuntu boots, however, I lose my display (my monitor says "Cannot display this video mode"). I am able to ssh into the machine just fine, so I know it is booting up fine; I just don't have a local console.
Other threads related to this topic suggest adding something like "vga=771" to the boot options in grub/menu.lst, but I don't see that file anywhere in my 11.04 server install. Where can I configure display settings now?
I am using the following video card:
$ lspci -nn | grep VGA
01:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27)
View 3 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Apr 15, 2010
I found what I believe to be odd behavior on an OpenSuSE 11.0 computer today. I needed to add some disk space on one of our computers and here is what I did: This computer had a separate disk for swap space so I deactivated swap (swapoff -a) and then removed the swap entry from /etc/fstab. I then shut down the computer and replaced what was a single disk used only for swap with a RAID1 hardware mirror.
I then booted the system and added a swap partition and another file system on the new RAID1 volume. Even after activating the new swap space with swap on, no swap ever seems to be actually allocated. The swap space shows up in top, free, "swap -s" and vmstat, but never gets used. I realize that a reboot will result in the swap being used, but is there anyway to get the kernel to use the swap without a reboot.
It's probably worth noting that I verified this behavior on a second computer. That is I turned off swap, removed the swap entry in /etc/fstab and then rebooted. Swap is never actually allocated until a second reboot. By the way, this was discovered when some of our users attempted to run java on the system where I did the first work and they got:
prompt> java -version
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Yesterday, java was working fine and I got the same results on my test computer. Is this a kernel bug or just odd behavior?
View 4 Replies
View Related
Jan 28, 2010
When I setup Intrepid (upgraded to Jaunty now), I chose to create a swap partition. I don't remember the size I specified. Here's what I'm confused about When I do 'cat /proc/meminfo' or 'free' or use the system monitor, it reports my swap size as 1262304 KB (i.e. 1.2GB). But if I do a 'fdisk -l', the partition size is reported as 746991 blocks (of 1024 bytes) and if I use the partition editor it says it's 729.48MB. XP disk mgmt shows it as app. 700MB too
View 9 Replies
View Related
Apr 25, 2010
I set my swap partition a bit high and now want to shrink it down and possibly merge it with one of my other partitions. I don't have dual boot, just have a second partition on the drive for data. Can I merge these easily?
View 7 Replies
View Related
Aug 8, 2010
I am very much new user of ubuntu and hardly know anything about linux. What is swap memory? I have dual boot system with windows7 and ubuntu 9.04. My hard disk size is 320GB and RAM is 4GB. Currently swap memory size is 4.3GB. Can I increase swap size? Will it have any advantage? How to do that?
View 2 Replies
View Related
