Fedora :: Size Of Partition After Install And Boot Manager?
Jan 27, 2011
When I installed fedora I told the installation routine to use the free hard disk space. I had 98gb of free space. After the installation I look under the MyComputer icon checked the free space which is 45gb. Well I have a hard time believing that I have used half of 98gb already. There must be something going on here.Also.. With regards to the boot manager. It made Fedora the default OS. While I don't really have a problem with that is there a way to change it so that my other OS is the default? I use two operating systems and sometimes one week I'm using one primarily and then things will change.
I have setup my opensuse 11.3 machine w/ LVM support for everything but boot. I have the following disks:
/dev/sda1 - 70.57 MB /boot /dev/sda2 - 5.81 GB back up for original windows /dev/sda3 - 292.21 GB LVM group.
When I attempt to resize the 70.57 MB partition, it tells me that 70.57 mb is the max that this partition can be. This was true even during the install
I just looked at the "posting permissions" and unfortunately I'm unable to insert the screen copy of the kde manager's representation of the goal I want to hit.I got a dual boot system with 4 hard disks and grub installed on /dev/sdd1. Windows xp sp2 (only used for professional audio tools, don't whip me ^^) is installed on /dev/sdc1. The disk sdc is partitioned with the following settings:
Code:
/dev/sdc1 * 1 498 4000153+ b W95 FAT32 /dev/sdc2 499 18922 147990780 f W95 Ext'd (LBA) /dev/sdc5 499 1494 8000338+ b W95 FAT32 /dev/sdc6 1495 18922 139990378+ 7 HPFS/NTFS
When I partitioned the disk I was believing 4 Go were sufficient for windows xp but after years I realized that many applications were using the C: by default (no way to change it thru regedit or another workaround, hard-coding probably) installing stuffs and under windows this is impossible to use such blessed things like the unix's symbolic links !So right now I'm a little tight with the remaining space to work with windows xp. (Of course the swap file has been moved to another partition since the first day I installed xp...)
I have is to use the 7Go of unused space on this disk to size up the /dev/sdc1 partition. When using kde partition manager I noticed that there is no way to use the unused disk space to size up /dev/sdc1 directly.Do you think if I create a partition with the 7 Go of unused space that there is a way to size up /dev/sdc1 without messing up the bootloader ? I don't think GRUB matters about the new partition, it should get the /dev/sdc7 entry. For the backup there is no problem this partition is completely backed up every two weeks (as an image) so the datas may not be lost as a real catastrophic... but if there is danger for the other partitions... that's will be more annoying... but solvable ^^
Once partitioned I believe that there will be a way to "merge" the /dev/sdc1 and /dev/sdc7 partitions and then I would enjoy a new xp partition with 7Gb of free space (it would change from my actual 300Mb !!).Technically it would be possible this is just a question of chaining the different blocks each others and refer to the new space added.The last block in /dev/sdc1 would point to the first block that starts /dev/sdc7 and "that's all"... and /dev/sdc7 would disappear as a partition.
I've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6 fsck from util-linux-ng 2.18 e2fsck 1.41.12 (17-May-2010) The filesystem size (according to the superblock) is 15360000 blocks The physical size of the device is 15359895 blocks Either the superblock or the partition table is likely to be corrupt! Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count' dumpe2fs 1.41.12 (17-May-2010) Block count: 15360000 # dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count' dumpe2fs 1.41.12 (17-May-2010) Block count: 15360000 Same thing for all the other backup superblocks I've tried. # echo '15360000 4 * p' | dc 61440000 # fdisk -s /dev/sda6 61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
Trying to install Ubuntu (any atm) on my father's HP destop. When i install, the partition manager wont allow me to shrink the windows partition to fit ubuntu in, and when i go to gparted to do it manually, it says that there are damaged sectors. is there a way to force ubuntu to install?
I must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.
Trying to boot alongside windows (just in case!). I downloaded the ISO from Ubuntu website before I saw the windows installer. After which I downloaded the windows installer! Now each time I try to load either one it tries to download the iso again. I'm only on a PAYG connection ATM so downloading again is not really viable this month!
I've tried to make a new partition using: my computer/ management/ shrink
But the size that windows allows is 140MB which obviously is not enough, I tried burning the ISO to a CDROM and booting this way but windows did not bother booting the disc. I entered F2 BIOS and changed the boot order to my CDRW drive 1st but still UBUNTU did not boot. Windows recovery manager or something booted.
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
on a dual boot can one change the size of each partitioned section of the boot once both sides are installed ?i have a 500GB disc and i have lucid on 307 Gb and maverick on 145GB i did this so i could test mavericknow i would like to change the split to say half and halfcan i do this?i have mountmanager installed but i am not sure how to proceed
I have Windows 7 on my laptop and am attempting to install Ubuntu 11.04 from CD.I boot from the disk drive, follow the prompts and eventually get to the screen where I can set how much space I want to give to the Ubuntu partition vs the Windows partition. My hard disk is 250GB, so I reduce the Windows one to 100GB (currently has 80GB of files on it) and set the Ubuntu one to 130GB (the other 20GB is split between the two hidden Windows 7 partitions).
I then click to continue and the progress bar for the install starts up but doesn't move, it just sits at 0%. I realised that the dialogue box underneath the progress bar can still be expanded and asks me to test using -n and -s, but when I type either of these into the box and hit return, nothing happens. I have checked my download of the .iso I used using WinMD5Sum and the hash matches up. I have already tried installing from USB but this threw an error, hence using CD. My laptop is a Dell Inspiron 1546 running Win 7 Home Premium 64 bit Processor: AMD Turion X2 Dual-Core Mobile RM-75 2.20GHz
I would like to increase the size of my root partition on OpenSuse 11.3. Currently, I have 11.3 installed on a dual boot laptop with Windows 7. My partitions look as follows:-
As can be observed above, I have used almost 70% of the available partition space with only 1.7 GB remaining. I have plans to install Microsoft Office 2007 on Wine and I know that 1.7 GB is not enough for the installation. I don't mind reducing the size of my Windows partitions in order to increase the size of the root.
I have done it quite often. Inserted and run the computer from a live CD so that the hard drive is not mounted an changed the partitions. It worked on the old reiserfs when I wiped the windows partition on my laptop to increase the space, it worked on ext3 partitions. Now I resized the swap partition and reduced the NTFS partition on my desktop - no problem. But it does not increase the ext4 partition. No error message it just does not do it. I tried several times with the suggested maximal setting, with a custom setting, etc. It just does not change size. Just for interest I booted into Suse11.0 live CD and tried from there. There I get the answer cannot resize partition as the file system does not allow resizing. Is something wrong with the system or does the partitioner not work with ext4?
a client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
When I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?
I created a fat32 partition using command line (parted) and though I specified it to be 100 GB, it only has a 10 gig storage capacity. Disk full prompts when I try to exceed 10 gigs.
I have installed Fedora 15 on my laptop a couple of days ago, but now i want to install windows next to it.To do this i have to resize the lvm partition.But at the final step (vgreduce) i get this message:Physical volume "/dev/sda2" still in use.What now? Can someone help me reducing the size of my lvm partition?
When partitioning disk devices for F14 on my new x86-64 box, I allocated 100G for / mounted on /dev/sda1. It's now 100% full. I have 365G free space available on the disk. Can I somehow extend /dev/sda1 to use some of this free space?
My laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
I'm dual booting with Win Xp at the moment and have been google-ing and tinkering about with my distro and i'm learning new stuff everyday but I have a question about something that's been bothering me. I think i've figured out that the / partition is similar to the C: Drive in windows which contains program files n stuff am i right? and the home partition which contains users and their files is an offshoot of the root?
So if this is the case, i was in the expert partitioner in YAST to see how the the drive was partitioned and was wondering if the / partition was too big and if i could decrease the size and add it to the /home?. My sys specs are 512mb RAM Dell Dimension 3000 with an 80GB HDD 2.8Ghz Intel Celeron. I also have a 80Gb and 160Gb External laptop drives mainly for my movies n music n stuff. Also is the Swap partition a good size for the spec of computer i have?
Is it possible to increase the size of a partition that is using LVM?I have 5GB of unpartitioned and unallocated space on my disk. I wish to add this to my VG. This free space is physically before the LVM partition.Can I increase the size of the physical partition using pvresize? Or is the only way to to create a new 5GB partition, add it to the VG and allocate it to the LVs? This is not ideal as I wish to minimise the number of partitions I have on the one disk.
I have a 10GB IDE disk that Parted says has a single 10GB partition (/dev/sdb1) which is mounted at /home. However, df and the Gnome file managers see it only as a 3GB partition. It was a 3GB partition when I was using Fedora 9 but the partition was resized to 10GB during the installation of Fedora 11.Can anyone suggest how to make df and Gnome see it as a 10GB partition?
I am running Fedora 15 along with Windows 7 on my Dell laptop. Yesterday, when I was trying to install TeX Live, it stopped in between saying that there is no space left in File System. Even though I have space in my hard drive volumes, space seems to be running out of my system partition which is only 9GB in size (I guess!).I am posting a few results that might help you guys. I have an unformatted 15GB partition. How can I add it to my system partition? And is my var folder too big (1.5GB)? If yes, how do I backup its contents and then delete them? Additionally, the File System shows a folder 'media' (89GB) which links the C: drive that contains Windows 7 and my personal files. Should it remain that way or should I separate it? If the latter, how? I just couldn't find any.
Code: #df -h Filesystem Size Used Avail Use% Mounted on
I am setting up a server and trying to access its partition over the nfs on a client machine. Our server has 4 1.5TB disks and the idea was to make a RAID 5 out of it.Now here is the problem:When I used only 1 disk that is nfs partition was of 1.5TB, I got fine speed(30MBps), but with multiple disks whether I am making 3TB (Raid 10) or 4.5TB (Raid 5), I get a really poor speed of 5-6MBps. I/O just waits.But for all above cases, disk I/O locally works fine.Does anyone knows any NFS limitation that is causing this problem?
Where can I install grub? I know it can be installed to the mbr of a hard drive. I also know it can be installed to a /boot partition. Can I install it to a lvm partition? Does it have to be /boot? grub-install --root-directory=/boot /dev/hda Does this command install grub to a partition and link it to a separate /boot? I have fedora, but this is a live cd. I need to learn where I can install grub2 to boot
Can anyone tell me how to increase system file's partition size.I have ext3 type partition where FC11 is installed.Is it possible to increase the size of ext3 without lost of data?
