General :: [RHEL6] Can't Boot X Window?
Jun 4, 2011I can't boot the X window (init 5) after yum groupinstal;l "X Window System"
View 1 Replies
ADVERTISEMENT
General :: RHEL6 - Disable The Tiered-progress Bar During Boot?
Mar 15, 2011How do you get RHEL6 to display the "traditional" display of startup information instead of the tiered/stacked progress bar? The standard info dump is displayed during shutdown.
View 2 Replies View RelatedRed Hat / Fedora :: How To Install RHEL6 Via PXE Boot
Dec 20, 2010I am looking to install RHEL 6 over the network. I havent done any kind of installation before, so this is proving to be an uphill task ergoI just registered on this forum.I'll first let you know what i have:1. I have an RHEL 6 image on one machine and on the same machine I also have a DHCP server ( but am not sure if I have a TFTP server as well - anyway to check ?)What I need:
I need to install RHEL 6 on another machine using the image on the earlier mentioned machine. I have come across many links on my searches online which cover the theoritical aspects which mentions the use of "kickstart" file which once transfered to my client-machine has to be run to install RHEL on my client.. But my problem is, I am unable to find any place which gives a sequence of steps or commands to follow which will help me install this... Can you please guide on how i can go about this
Red Hat :: RHEL6 - Can't Boot From Usb Flash Drive
Dec 22, 2010I follow the RHEL6 installation guide to make a USB minimal boot media. The document told me the only thing i need to do is:
Code:
dd if=boot.iso of=/dev/sdb
Where boot.iso is a 200MB ISO image i downloaded from the Red Hat Customer Portal and /dev/sdb is my USB flash drive. But i failed to boot. The USB flash drive's size is 2GB, and my PC's bios supports boot from USB.
General :: Run Kvm (rhel6) On 32 Bit Architecture?
Jun 20, 2011i am using acer extensa 4620 laptop of 32bit architecture with core 2 duo processor and 1 gb ddr2.i have installed RHEL 6. i want to do practice on virtual machine for my rhce exam.due to 32bit architecture i am not able to use kvm one more problen,during installation of RHEL6 i cannot use "install or upgrade" option while booting dvd.after entering this opiton my screen goes blank nathing comes,but i am able to install usic "basic video driver option" same problem i face when i enter in rescue mode also..... nothing is displayed...the screen goes blank
View 2 Replies View RelatedGeneral :: Difference Between Rhel5 And Rhel6?
Feb 10, 2011The new Red Hat release takes advantage of the latest Intel and AMD processors as well as advancements in virtualization and Windows interoperability.
View 4 Replies View RelatedGeneral :: RHCSA Exam In The RHEL6?
Apr 5, 2011I wanna take the RHCSA exam in RHEL 6. I read exam has 2 parts. And I have some questions about exam.
1. Do they take the exam in one day or 2 days?
2. How many questions come in theoretical part?
3. How many minutes for 1 question?
[code].....
General :: RHEL6 - Stop Booting To The GUI
Feb 11, 2011I loaded RHEL6 (first time ever loading it) and it would boot to the cmd line. I changed /etc/inittab to boot to GUI, now it freezes. I want to change it back, but do not know how to stop the boot process so I can get to the cmd line to re-edit inittab. I'm working in VMware vCenter.
View 5 Replies View RelatedGeneral :: Does RHEL6 Include Smp Kernel
Dec 17, 2010Does RHEL6 include smp kernel? When I run uname -arn it does #SMP but I want to confirm if a seperate RPM like kernel-smp-* is included in default installation.
View 4 Replies View RelatedGeneral :: Possible To Activate RHEL6.0 In Trial Version In RHN?
Apr 14, 2011I downloaded RHEL 6.0 free 30 day trial version.I would like to train to exams but in order to install packages from RHN repo I need to register in their web site RHN.Is it possible to activate RHEL6.0 in trial version in RHN ?
View 6 Replies View RelatedGeneral :: RHEL6 Crontab Doesn't Work Properly?
Apr 26, 2011In RHEL6 root's account I have crontab job: 30 6 18 4 1 /sbin/init 6 It worked fine on the 18th of April and properly restarted my system, BUT it also restarted my OS at 6:30 on next Monday - 25th of April.
View 2 Replies View RelatedGeneral :: Install Flash Player 64 Bits Rhel6?
Aug 2, 2011how to install flash player 64 bits rhel6
View 2 Replies View RelatedGeneral :: HTTPD Service Fail To Start In RHEL6
Jun 7, 2011I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedGeneral :: Installing RHEL6 Using Oracle Virtual Box Having Win 7 As Base OS?
May 10, 2011I have Win 7 installed on my laptop with 4GB RAM. I have installed Oracle VirtualBox-3.2.8-64453-Win. Kindly let me know the steps to install RHEL 6 on this.
View 2 Replies View RelatedGeneral :: Parallel Port Communication With RHEL6 Not Working?
Dec 13, 2010I was trying out the parallel port communication on RHEL 6 but found it not working:
#echo hello > /dev/parport0
write error :Invalid argument".
#ll > "/dev/lp0"
/dev/lp0:No such device or address
General :: RHEL6 Hangs While Installing On ST3160215AS ATA Drive?
Mar 14, 2011would be great if somebody can help me suggest why RHEL6 installation does not start? If its a problem of disk drive,
View 2 Replies View RelatedGeneral :: New Features In RHEL6 Comparing To Its Older Versions?
Nov 19, 2010what new features in RHEL6 comparing to its older versions??
View 4 Replies View RelatedGeneral :: Cannot Boot Window Virtual Machine On OSX
Feb 4, 2010In order to get the work done I use a Macintosh Macbook Pro (4,1) with a Boot camp partition running Windows 7.This allows me to use my favorite OS (OSX) with my required work environment (Win7 & .Net) when ever I need them.To allow me smooth usage I use Parallels 5 to virtually boot my Win7 machine from within OSX but whenever I want to do some heavy lifting I reboot into Windows 7 (on boot camp) which allows me to use my laptop's entire resources for my work.
My problem is this: I am now about to begin work for a company in Tel Aviv which uses Linux desktops for development and I need to follow suit. So I've given my self a new Quest: Set up the ultimate web development platform. My goal is this-
1. Install the three operating systems one along side the other - OSX, Ubuntu & Windows 7.
2. Set each one of them up in such a way that allows me to boot into it (meaning I can have any one of these OSs running on its own when I want.
3. Use parallels to virtually boot my Win7 partition - this allows me to keep using Office 2007, which I use often.
4. optional! Use parallels to virtually boot the Ubuntu OS also.
I have managed to complete goal 1 & 2.But I simply can't get 3...In theory it isn't a problem to install windows & OSX along side each other and virtually boot the windows under OSX using parallel's bootcamp virtualizer- BUT - the moment I install Linux along side the other two it break's parallel's virtualizer and it can't boot. I think it is due to parallel's in ability to use GRUB but I'm not actually sure about that.
I am considering compromising and going for a system like this:
1. Install OSX and Ubuntu on the laptop - which means I can boot into each of them.
2. Create a virtual machine for Win7 using parallels.
But that will be a real compromise as far as I'm concerned and I hope to find a way to set up the machine as I described earlier (three OSs which can be booted independently and also loaded in VMs).Just to make sure I'm clear - I HAVE MANAGED to install three independent OSs on the same machine - but that always prevents me from booting them as VMs using parallels...
General :: Install And Run Php, Mysql & Apache In Rhel6 In 64bits Redhat
Aug 3, 2011how to install and run php, mysql & apache in rhel6 in 64bits redhat
View 2 Replies View RelatedGeneral :: Repair Dual Boot Opensuse And Window 7?
Apr 23, 2011as friend i am new in linux i install open suse and window 7 in dual boot .. every thing was fine but last week i got terrible virus attack at my win7 so i format as fat32 using yast partionerbut now i also delete first boot partion .. now i can't install window on it .. there is blue screen problem stuck the installation
View 1 Replies View RelatedGeneral :: How To Update Newly Created Partion In RHEL6 Without Rebooting System?
Apr 17, 2011How to update newly created partion in RHEL6 without rebooting the system?partprobe /dev/sdaN...does not work here in RHEL6, however it did work in RHEL 5.
View 2 Replies View RelatedGeneral :: Make System Boot Up Into Window Manager-less X Session?
Dec 30, 2010I am setting up a thin client boot (over NFS) with x2go thinclient. So far everything works, the client boots over PXE, mounts the NFS dir on the server. But the x2go thinclient system does not install properly. I end up with a CLI prompt, to log in. It does not start X, not does it start the x2go client in a window managerless X session.
X2go is, in case you don't know it yet, a cool Linux X terminal session system, very much like Nomachines NXserver. I like it very much, since my experience, especially with freenx has not been good.
Now I am missing some Linux knowhow here: I know that after startup (the CLI part), the display manager is started (GDM or KDM), which starts the X server and shows the graphical login. Now since X2go does not properly setup and there is no documentation about the thinclient part, I will set it up myself.
I need the system to boot up, startx and then immediately start an X program (x2goclient), without having to log in before.
I found that putting a .xsession file in to the users home dir causes that script to be run when you invoke startx.But when I put startx in a script that runs as the last one in the runlevel (as in S05startx), it does not run at all.
What is the proper way to run X and a program on it directly, right at startup?
General :: Laptop Logging Out Of Window Manager A Few Minutes After Boot Up And Login
Sep 1, 2010I have a troubling issue. I log into Linux Mint 9 (fully up-to-date) on my Samsung Q320 laptop with power connected and after a few minutes it seems like the entire X session dies, I am logged out, all processes are killed and I am presented with the normal GDM login screen. When I first installed Linux Mint, this never happened. I have the NVidia closed-source driver installed and when the system logs me out, it immediately restarts X loading the NVidia driver which flashes the logo on screen. This all happens instantaneously, so it is not a reboot of the machine, just a restart of the display manager it seems.
There does not seem to be any cause for this. I have disabled all screen saver and power management settings that may lead my system to auto-logout of Gnome. The system log doesn't indicate anything unusual happening. Confused about where to to take it from here bar and fresh install of the OS. Perhaps there are some X11 logs I should be checking.
Update: Moved to Ubuntu 10.10 and its recommended NVidia driver and have not experienced this problem since.
General :: Disallow Closing Last Emacs Window Via Window-Manager Close Button
Jul 8, 2011I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
OpenSUSE Install :: LVM - Can't Boot Into X Window - Only GRUB Command Line During Boot
Nov 4, 2010Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View RelatedUbuntu Installation :: Install And Boot From External HD While Still Boot Window Off Internal HD?
Oct 23, 2010Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
View 9 Replies View RelatedRed Hat :: Install Firefox 4 In RHEL6?
Apr 22, 2011Is it possible to install firefox 4 in RHEL6? I can't find a mirror for this package.
View 3 Replies View RelatedRed Hat :: Why Kernel Cannot Compile Kvm.ko For 32-bit Rhel6
Apr 29, 2011I compiled kernel-2.6.32-71.24.1 on 32-bit rhel6, but there is no kvm.ko. what if I want to use kvm on 32-bit rhel6.
Steps to Reproduce:
1. install kernel-2.6.32-71.24.1.el6.src.rpm
2. rpmbuild -ba kernel.spec
3. find /root/rpmbuild/BUILD/kernel-2.6.32-71.24.1.el6/linux-2.6.32-71.24.1.el6.i686/-name kvm.ko
Actual results:
not found kvm.ko
Red Hat / Fedora :: Disable The Iptables On RHEL6?
Feb 4, 20111: Did chkconfig --level 12345 iptables off (and ip6tables too)
2: Did system-config-firewall and unclicked enable
3: Rebooted:
Dang the stuff is still there:
--
# /etc/init.d/iptables status
Table: mangle
Chain PREROUTING (policy ACCEPT)
[code].....
Networking :: PXE Install For RHEL6 X86 Not Working?
Jul 15, 2011I am trying to install RHEL6.0 x86 from a PXE server. Right after formatting the disk installer shows this error:"Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctlygenerated. Cannot retrieve repository metadata (repomd.xml) for repository: anaconda-edHatEnterpriseLinux-201009222021.s390x. Please verify its path and try again."I extracted the image on Windows host and then moved it to the Linux PXE server
View 8 Replies View Related