I'm doing some research for a friend who wants to dual boot Windows 7 with a Linux Distro that has Perl inbuilt & also supports .MP3 and other popular codecs "out of the box"
From my limited research, OpenSUSE seems to fit the bill (as does Mandriva Powerpack).
Also, how easy is it to create a dual-boot with Windows 7 with this distro?
I Need instructions on how to create a dual boot with Windows 7 already installed ...
View 2 Replies View RelatedI'm trying to create a Linux instance on a Windows 7 PC and use dual-boot. I have created 64GB of space for Linux. Is this enough? When I boot from the live DVD and go through the setup, I get stuck setting up the unassigned space as a linux partition. I don't understand what the setup is trying to tell me and I'm afraid I'll wipe out Windows 7. The message I get says there isn't enough space even though the unassigned available area is 64GB. I am very timid about following what Yast2 is telling me because to my untrained eye it appears the setup wants to use my entire hard drive. Where can I find more information about the disk setup section of the installation process?
View 9 Replies View RelatedI am new to linux. I tried and failed. I need some help on Creating patitions (I think it is root, swap and home).I have HP laptop with WIndows 7 installed. I have shrink the volume to allow Linux installation. I have three partitions, first one is windows boot - about 100MB. Second one is about 110GB and it has windows 7. Third one is UNALLOCATED space of 110GB that I intended for Suse.
Now I am going to install the Suse. The unallocated spaces should be "primary" or "extended"? Also, should I divided this new partition in to three partition? If does, what are sizes for each? I want to learn Linux so I will able to look for better job. This is the first time I ever look into linux and confused.
i want to dual boot, and create ubuntu on a second partition, and while im at it remove the windows partition that i dont use on here at all
also, i want to run chkdsk first, does anyone know how i can do that on linux?
I would like to create a dual boot Opensuse/Vista laptop. My problem is I do not have a DVD-RW drive, and I am not that good with creating a bootable USB stick. I have read some of the installation guides offered here and attempted to install Opensuse via my USB stick without success. My question is there a setup.exe download offered for Vista users who would like to create a dual boot laptops? I have an 8Gb USB stick that was made "bootable" via some other forums, and I have downloaded the DVD ISO image of Opensuse 11.2 to my desktop.
View 5 Replies View Relatedi have a toshiba laptop running Windows 7 64 bit and i would like to install openSUSE 11.3 64 bit on it. I downloaded the DVD version and would like to know how i should do it.
View 1 Replies View RelatedMy main os, albeit only because of gaming, is windows 7, and I was looking to dual boot with 11.3. I couldn't find any documentation of this, so here it goes: Does the executable on the 11.3 disk install opensuse like wubi does ubuntu?
View 9 Replies View RelatedI am trying to dual boot windows 7 and openSuse. I have shrunk my main partition and it is now unallocated. When running the DVD at the disc section I got the message Delete partition /dev/sda1 (199.00MB) This is my windows system partition (NTFS)
Delete windows partion /dev/sda2 (261.49GB) This is my main partition C: (NTFS) (Don't want to delete this Resize impossible due to inconsistent fs. Try checking fs under windows. Delete windows partition /dev/sda3 (16.31GB)This is my recovery partition.(NTFS) I also don't want to delete this. Resize impossible due to inconsistent fs. Try checking fs under windows. Delete partition /dev/sda4 (103.34MB) HP tools (FAT32) (Not sure about this, but would rather keep it.
Create swap volume /dev/sda1 (2.01GB)
Create root volume /dev/sda2 (20GB with ext4)
create volume /dev/sda3 (276.08GB for /home)
I also pressed created partition and clicked on the unallocated space but I got an error telling me that I either didn't have enough space or hadn't selected enough partitions. (The unallocated space was 20GB)
Yesterday (Sept. 28) I managed to install openSuSE 11.3 on my Toshiba Satellite Pro C650 laptop, side-by-side with Windows 7 which was pre-installed. In brief I'd like to report the problems I had encountered up to yesterday.
1. Upon inserting the DVD and after the start of the installation the system would take me to non-GUI (Text) Mode and would finally respond with the message: "No repository found."
2. After that I tried to install openSuSE 11.2 and 11.1. There, although the installation went through smoothly, I had to deal with a new problem; when I selected to boot Windows 7 from the grub menu the system responded with the message:
rootnoverify (hd0,1)
chainload +1
BOOTMGR is missing
Upon booting the computer from the DVD with the Linux OS and before I hit ENTER I changed the Kernel by hitting F5 (or whatever key corresponds to Kernel at the bottom of screen) to "Failsafe mode". That did the job. The installation started and ended smoothly. Oh! one other thing I did is to edit the preselected disk partition and delete the swap partition since the disk has to have four and not five partitions.After that, I became root and edited "/boot/grub/menu.lst" file to correct the "(hd0,1)" for the Windows 1 to "(hd0,0)" since it is the first OS.
I am very much excited to try out openSUSE 11.3.. But i am very much afraid of losing my data in windows partitions without knowing the exact procedure to install it..here are my existing partition list... Please have a look at it and suggest me..
c : 40 GB
d: 120 GB
e: 140 GB
f: 140 GB
and i have some free space of 28 GB.It is unallocated.I want to install openSUSE into this free space.Now please tell me whether i can proceed with the default disk configurations given at the install time or do i have to modify and adjust the partitions or do i have to create partitions for the available free space.
i have openSUSE 11.3 as my primary OS. and i want to be able to dual boot windows vista. from what i read i would have to reinstall the 11.3 to set up to dual boot. i may have that wrong.
View 2 Replies View RelatedI tried a lot of distros and the one who i liked was openSUSE, I really liked it! And now I want to install openSUSE in my PC, but, there's two problems.
1- I need to keep Windows Vista, because i am the only onein my house who knows how to use a linux (at least, use a little bit, hehe).
2- I don't know how to make a dual boot with Vista and openSUSE.
I want a tutorial showing me how to make the Dual Boot (Windows Vista x openSUSE), and, if possible, with screenshots.
My Laptop runs on Windows vista.And I just downloaded Opensuse 11.4 KDE in want to Dual Boot So I first Created around 25GB of Unallocated Space Using Disk Management in Vista and Ran SUSE live from a CDROM But i cant seem to understand the disk partition and where suse will be installed.I want to install suse only in my unallocated space.How come other distros automatically detect unallocated space.Please help.Used to tun linux virtually but i thought i'll dual boot it
View 2 Replies View Relatedere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
View 4 Replies View Relatedit's my first time to try openSuse, i want to dual boot openSuse with windows vista home premium. anyone can tell me how to dual boot openSuse 11.2 with main os windows vista step by step start from partition harddisk which use by opensuse, and how to set the grub.
View 2 Replies View Relatedhad a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:
- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)
setup was successful (no error messages)
Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies View RelatedI have installed openSuse 11.4 and works perfectly. The main problem is, I have another system on my HD, Windows XP, and unable to boot to my XP system. If I choose Windows on Grub menu, its just show me the same text as in the menu.lst at Windows' section. I am able to boot in Windows, by adding 'makeactive' but then, I unable to see the grub menu. And to boot to oS again, I must insert DVD installer and made an update. How tiring.
[Code]...
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies View RelatedWe were trying to install w7 on a reserved partition. W7 did not like the partition (whatever we tried).
Since we had 3 hard-drives, on the allocated drive we deleted all partitions and set the partition table type new to MSDOS (yast etc.....).
W7 installed fine. We did not time it, but it appeared that 11.3 installs faster plus considering 11.3 installs quite a number of applications.
There are plenty of postings re integrating W7 to the Grub-menu.
This system went through several Suse updates, hardware upgrades, basically was all over the place.... we did a "new" install of 11.3 allocating its own hard-drive.
Install......fine, and Grub entered W7 to the menu. Worked ! Mounted the windows partition to /home/yourusername/windows
So, if you really (?) need W7 and have a spare hard-drive, this maybe is a clean solution.
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
I want too create a dual boot Windows 7 Ultimate (64 bit) and Ubuntu (64bit). how to do this but I want something special. The boot loader appear. Will be only one password field, no OS names. If I introduce a password will boot in Linux, if I introduce another password will boot in Ubuntu. Also in Ubuntu, you can see windows partitions only if you introduce a password (root or power user).
View 3 Replies View RelatedI've shrunk my Windows partition to ~200GB and made ~100GB of free space for Ubuntu BUT .. it doesn't allow me to create a new partition there as I already have 4 primary ones.Since all of the given partitions ( including Recovery and Tools ) can not be touched ( removed ), I have no idea on how to solve this ..
Code:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]....
(This is for a 100% Clean install)
Q1) I was wondering if it is possible to Dual boot Ubuntu with Windows XP on a 1TB RAID-0 setup ?
Q2) Also, is it possible to create a SWAP partition (for Ubuntu) on a NON RAID-0 HDD ?
Q3) Lastly... I read GRUB2 is the default boot manager... should I use that, or GRUB / Lio ?
I have a total of 3 HDDs on this system:
-- 2x 500GB WDD HDDs (non-advanced format) ... RAID-0 setup
-- 1x 320GB WDD HDD (non RAID setup)
(The non RAID HDD is intended to be a SWAP drive for both XP and Ubuntu = 2 partitions)
I plan on making multiple partitions... and reserve partition space for Ubuntu (of course).
I have the latest version of the LiveCD created already.
Q4) Do I need the Alternate CD for this setup?
I plan on installing XP before Ubuntu.
This is my 1st time dual booting XP with Ubuntu.
I'm using these as my resources:
- [url]
- [url]
Q5) Anything else I should be aware of (possible issues during install)?
Q6) Lastly... is there anything like the AHCI (advanced host controller interface) like in Windows for Ubuntu?
(Since I need a special floppy during Windows Install...) I want to be able to use the Advanced Queuing capabilities of my SATA drives in Ubuntu.
HW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I have recently installed Ubuntu 10.04 on a Compaq Presario V3000.
To prepare the install, I freed about 15 GB of space, booted from an USB. I chose "use largest continous free space" when it got to that point and then proceeded with the rest.
Now when I choose vista it will not load properly, here's what happens:
1.Windows says loading windows files.
2.After a while, I have to choose a language.
3.Windows looks for operating systems to repair.
If I choose not to, it will take me to a menu where I can choose to fix boot problems, command line, etc...
Linux is running very well, vista is the problem here, I have a recovery disk*, but I wanted to ask you guys if that is the correct move. I really need to keep windows to run some windows only apps.
*This disk was burnt on another computer, an HP from a friend who has the same vista edition. Will this work? This computer's burner is broken..
This is actually something for my gf, she has an account on my computer(only ubuntu on it) and uses it often (Mendley, Zotero, and sciency things in general). She loved it and asked me to install a dual boot with her win system. She use SPSS for whatever kind of statistical analysis it does and she likes ms office better then open office, and I would like to leave her with the choice....