I am using suse 11.3(32bits). It was working fine but after using 5 months my tmp folder was almost full and as I have cleared my tmp folder I am not getting sound in vlc, Mplayer, plugin, even from ......
View 5 RepliesI have no sound in suse not in amarok and neither in ...... could it be that my onboard soundcard is not insatalled? and How can I check it. And How can I install it. I think it is an rtl8139 soundcard.
View 2 Replies View RelatedJust started using openSuse 11.2 and I'm really liking the desktop. I got my head around the software repo's and got all my drivers working but I just can't work out how to get sound on firefox. Videos play fine (that was my problem with Mandriva) and the sound works everywhere else (Amorak,desktop sounds, etc) but firefox is silent (not just flash stuff). I've installed flash, java, mplayer and Gstreamer (but I had to change the vendor options). Am I missing some magic plugin or am i being incredibly stupid and there is some kind of "sound on" button I've missed? I've been searching for an answer all afternoon with no success. Im on a 32bit machine with an AC'97 sound controller (Driver: Intel ICH, modules: modprobe snd_intel8X0, Bus:
View 3 Replies View Relatedpointers on troubleshooting audio? I have tried various headphones but there is no sound.System details are as follows:- SuSE Linux 11.1- KDE 4.1.3- Foxconn 661FXME motherboard- Onboard audio, 5.1 channel, AC97 interface (Realtek), ALC655 chip
View 1 Replies View Relatedwhen i am in firefox, i do not get any sound when playing embedded videoes (like videos). but, i do get sound when playing videoes using vlc or when starting up or shutting kde.
what do i have to do to get sound in firefox?
I have a default OpenSuse 11.3 system with KDE4 and alsa and an Asrock 4coredual Sata2 motherboard with intergrated audio. I configured audio by yast2 after installation of the system, and it was working. But: anytime I re-start the system, a message pops up after start-up, asking if I really want to remove audio device this and that, and no matter what I choose, there will be no sound.
I can only get sound again by:
- running yast2,
- deleting the audio device configured,
- adding the same device, and setting the volumes again.
It is rather time consuming to manually re-configure (remove and add) audio after each system start-up.Another issue: there is absolutely no way to configure skype to be able to use the microphone input. What I speak into the microphone it goes to the loudspeakers (connected to the front speaker output), but never to skype. The only way to get skype capture mic input is to configure the front speaker as a microphone input device is skype, in which case skype captures all sounds that go to the loudspeakers, but in this case sound is overly distorted. Sometimes muting channels other than Mic and Master in kmix does not work either.
Is there a way to get a working audio in today's developped linux distributions, especially SuSE 11.3, or that is the past, like convenient file managers and useable desktop?
I´ve got the problem that i get no sound with adobe Flash 10.0.32.18 in Firefox 3.5.4 on my Suse 11.2 What i´ve done: After Suse 11.2 installation i installed Audiocodecs by using 1 click installation from:
Restricted Formats/11.2 - openSUSE-Community
Switched default Sound to USB Device in Sound Options in Task bar. After this i uninstalled the Adobe Flash plugin and reinstalled the Flash Plugin (after uninstall of Plugin, it still appears in Firefox as "10.0r32") by using the install Option direct from the adobe homepage as Yast Installation.I get sound with Koffein, can play mp3, everything fine, but Flash Clips are without sound. For sound i use usb speakers plugged in direct to the USB port of my Asrock motherboard. Suse also find the on board Nvidia Soundchip, but i only use the usb speakers. For further test i installed VLC Player. Here i also got no Sound, but Video is still playing.
I dont have a sound in my suse 11.3 here is the link about the sound information URL...note = in ubuntu 64 the sound works
View 9 Replies View RelatedI have opensuse 11.1 on one of my systems and everything is working now execpt for the sound. I says that gstreamer won't work. Any ideas what would cause this? Kernel is 2.6.27,
View 1 Replies View RelatedAn old problem has resurfaced I can't get sound on my tvcard after changing hardware!!My current Motherboard is GA-MA785GPM-UD2H from Gigabyte.My Processor is AMD Athlon II X2 250.My OS is openSUSE 11.3_x86_64. I am using the built in sound card as well as the graphics.The program I use to watch Tv is tvtime. Both the programs (sox & tvtime) are from packman repositories. In fact I have switched my system packages to packman repository.The 'sox' script the I used for so long, looks like this.
[Code]...
I know that line 3 is commented, but still it used to work; & I have tried uncommenting it but to avail. It used to work like a charm but now ever time I try to execute the script, it says emon@magic-box:~> /home/emon/sox_script_for_tv.sox FAIL formats: can't open output file `/dev/dsp': Device or resource busy.
I have been using openSuse 10.3 on my laptop since 6 months now. Only last week i came to know about this bootable kde suse : http://news.opensuse.org/2009/01/09/...-opensuse-111/
When i was done succesfully booting from the usb stick, and came back to my good old suse10.3 on my laptop, i found out that the system sound has suddenly stopped working. My sound is coming with my usb stick, but not with my native os.
I recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.
Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.
[Code]...
I have a strange problem with sound, or maybe It's ok, I dunno. The problem is. The first launched program that uses sound, "takes over" the sound or smth, anyway, all programs, started next, just not play sound at all. The only solution is to close all programs using sound and start one I need to "listen". When I get into sound settings menu and see the list of programs using sound, I see just one started first.
View 1 Replies View RelatedAfter getting my computer to reboot properly, I noticed that SUSE will only play about half a second of my wav sound files and then stops. Is there anything I need to do?
View 6 Replies View RelatedLoud popping sound approx. 11 secs after switching to battery power if audio hasnt been used for awhile (11 secs probably?) It will pop when audio is started (like movie, alert etc etc). It appears to be a power saving problem. And is not occurring for me on other distros, and only started happening recently on OpenSuSE. I found the exact same problem on the OpenSuSE forums dated 2008 (see: [URL]) but no solution as of yet. And by loud popping sound imagine one of those 'black cat' snappers you throw on the ground and they pop, it sounds almost identical.
View 1 Replies View RelatedI want to find a free download of a flash demuxer. Having troubles finding that I assume I can download with yast after finding it.
View 3 Replies View RelatedIs it possible to install rpms from SuSE 8.2 pro to run on SUSE 11.2 x86_64. I mean games and simple applications not system files.
View 1 Replies View RelatedI am having problems getting sound to work in Suse 11.1 with a Cirrus Logic CS4281 chipset. I believe audio was working correctly in 10.2 (using KDE 3.X) but I am not 100% sure. The output from alsa-info.sh can be found at:
[URL] For a window manager, I am using the minimal x option. In general, I need sound to work without having an X server running (this is an embedded system). The motherboard is a VSBC-8 from versalogic and the manual can be found at [URL]
Here is a list of the things that I have tried:
1. Used alsamixer to set all volumes to 100
2. Used Yast to set all volumes to 100
3. Used Yast to test the sound
4. Used xmms to test playing a mp3 file
5. Used speaker-test -c2 -l5 -twav
Everything went wrong no sound, no scsi to scanner, printers, and kde only using failsafe. So, did a new install and still probskde stops half way through saying it there is no file in /lib/modules/2.6.31-5-0.1-desktop
Fixed prob by creating a copy of 2.6.31-8.0-desktop
kde only starts with x11failsafe
On failsafe boot (from GRUB) load of messages daying can not find disks then mess Doing Fastboot
At least I've got sound though printer still a prob
Any ideas how to fix the kde start up?
config
ASUS M4A78-E, AMD xenon III 550, 4GB mem
SUSE 11.2 standard KDE, network install
I have recently installed 11.3 onto a computer I just dropped a new mobo/cpu/memory into. At first everything worked great! (minus a few video streaming issues...but that is for a later date) Then, a few days ago, I let it do an update. Boy to I feel stupid now. I guess if it ain't broke..... So, now I don't have sound in the browsers or for the video players...such as xine. I do however still have sound with Amarok and system sounds when it boots up.
I have deleted the sound device in Yast and let it re-install several times. I tried different setting there as well. Checked and rechecked then checked again the mixer settings. Made sure my group settings included audio...just in case. Now Amarok and the online video play at warp speed, and only Amarok gives me sound....garbled...but sound. The system keeps telling me when I reboot that "one or more sound devices were removed" and wants to know if I want it to ignore them from now on. I've answered yes and no several times.I've also tried updated the alsa drivers in the software management of Yast. Can someone please help me before my wife gets mad at me for converting this computer to Linux?
Here is some information.
Password:
The "Warp Speed" for the video and audio was resolved after removing and then re-installing the audio driver and a quick reboot. But for some reason I had to reboot yet again to get the internet connection working again. This has happened to me a couple of times now. Also, when I try to adjust the Pulseaudio config under "other"in the audio config of Yast,it says it is not installed. When I try to install, it has a conflict with another program.
Trying to upgrade my installed SUSE 9 version to version 11 but am having trouble.Do I need to delete the earlier version first and do a clean install
View 3 Replies View RelatedThe hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies View Relatedsound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
View 1 Replies View Relatedtrying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
This problem presented itself upon upgrading to ubuntu 9.10. Any time something affects the sound system the buzz goes away. If a song plays, no buzz. If I simply adjust or mute the volume, no buzz. But after 10 seconds of no sound related activity, the buzz returns. This is a very loud and aggravating buzz, most likely made worse by the fact that I run my sound through an amplifier.
View 2 Replies View RelatedI'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
Code:
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
My usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
View 1 Replies View RelatedI bought this laptop several years ago. It had Vista. Just long enough for me to download SUSe, nuke and pave the HD and install Linux. Recently I upgraded from 1 GB to 4 GB of RAM, the maximum that is allowed given the motherboard (based on from what I am able to learn the Intel 945 chipset).
After upgrading to 4 GB, the machine (according to "My Computer") only sees 2.9 GB. I understand that under an earlier version of the BIOS that the machine would not recognize the RAM correctly. Additionally the "My Computer" page lists the display as "Intel 945GM". My problem is that I can find no Linux utility to flash the BIOS on this machine-- Toshiba only provides the BIOS included in an .exe file for either XP or Vista. I am hesitant to use the BIOS for the Intel 945 series motherboards from their site.
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I am running memory test on SUSE, Memory test is just writing some patterns into a memory and reading it back in all CPU threads. After a while, when memory test is running in the background , I am trying to reset the system by echo b> /proc/sysrq-trigger command, Upon SUSE warm reset , I am seeing some UNCORRECTABLE MEMORY ERROR in model specific register (MSR : 0x421),
I am seeing this behavior on one of my server which has huge amount of memory.,Have you ever seen this UCECC error when SUSE generates warm reset when memory test in the background ?