OpenSUSE Multimedia :: Sound Bugs On Suse 11.3/gnome?

Nov 2, 2010

I have a strange problem with sound, or maybe It's ok, I dunno. The problem is. The first launched program that uses sound, "takes over" the sound or smth, anyway, all programs, started next, just not play sound at all. The only solution is to close all programs using sound and start one I need to "listen". When I get into sound settings menu and see the list of programs using sound, I see just one started first.

View 1 Replies


ADVERTISEMENT

OpenSUSE Multimedia :: No Sound In Firefox With Suse 11.2?

Nov 20, 2009

I´ve got the problem that i get no sound with adobe Flash 10.0.32.18 in Firefox 3.5.4 on my Suse 11.2 What i´ve done: After Suse 11.2 installation i installed Audiocodecs by using 1 click installation from:

Restricted Formats/11.2 - openSUSE-Community

Switched default Sound to USB Device in Sound Options in Task bar. After this i uninstalled the Adobe Flash plugin and reinstalled the Flash Plugin (after uninstall of Plugin, it still appears in Firefox as "10.0r32") by using the install Option direct from the adobe homepage as Yast Installation.I get sound with Koffein, can play mp3, everything fine, but Flash Clips are without sound. For sound i use usb speakers plugged in direct to the USB port of my Asrock motherboard. Suse also find the on board Nvidia Soundchip, but i only use the usb speakers. For further test i installed VLC Player. Here i also got no Sound, but Video is still playing.

View 9 Replies View Related

OpenSUSE Multimedia :: Dont Have A Sound In Suse 11.3

Feb 27, 2011

I dont have a sound in my suse 11.3 here is the link about the sound information URL...note = in ubuntu 64 the sound works

View 9 Replies View Related

OpenSUSE Multimedia :: 11.2 + Gnome : No Sound / Get That?

Sep 18, 2010

I am using OpenSuse 11.2 + Gnome

After following the message "check your multimedia problem in ten steps", I still have no sound.code...

View 3 Replies View Related

OpenSUSE Multimedia :: No Sound In Banshee With 11.2 Gnome 2.28.0?

Dec 12, 2009

i have a fresh installation of opensuse 11.2 32-bit. my soundcard is terratec ewx 24-96. the card is detected in yast, and i can play test sound from the yast/sound panel. all volume sliders are set to maximum values (i have also double checked it in alsamixer).

i *can* hear the sound when doing this test from the gnome terminal:

speaker-test -dplug:front -c2 -l5 -twav

however to make this test work:

speaker-test -c2 -l5 -twav

i had to remove the asound-pulse.conf file. after removing this file the second test (speaker-test -c2 -l5 -twav) works. removing this file also solved the problem of missing sound in videos videos played in firefox. the original contents of the asound-pulse.conf file was:

pcm.pulse {
type pulse
}
ctl.pulse {

[code]....

the problem is i can't play any audio files (.wav or .mp3) in banshee.

i am sure the .wav file i use while testing is ok as i can play it with aplay.

when i try playing the .wav file, banshee does not complain about any missing codecs. the slider moves as the file is being played. i have also started banshee with the --debug option, but there were no errors in the output.

so my guess is that banshee is playing the files, it's just that it sends the data to the wrong device/channell or whatever it is.

all of the gstreamer packages i have installed are from the packman repository.

when i run gstreamer-properties, the only setting on the audio tab that gives me sound is: alsa (for the plugin) and default (for the device).

View 2 Replies View Related

OpenSUSE Multimedia :: 11.3 GNOME, TOTEM And BANSHEE No Sound On .mp4 And Quicktime?

Jul 17, 2010

I just did a fresh install of openSUSE 11.3 32bit GNOME on my notebook and everything runs fine...yet

But there is an issue with the sound playback on mp4's and quicktime (apple trailers) that I was not able to fix.

I added the Packman 11.3 repo via Yast -> Software Repositories -> Add... -> Community Repositories

Then I used zypper to get the related gstreamer-plugins ffmpeg faad vlc w32codec-all libmp4v2...

So far the media playback seem good, except the issue of "no sound with gstreamer related media players on quicktime and mp4"...

I set all available/related/installed packages to "Packman" (Yast -> Software Management), did zypper refresh + zypper up but I am simply not able to get sound from gstreamer...It works fine in VLC though!

Some google and forum research showed that it's an issue that has occurred over the recent years but I could not found a proper working solution.

If I run totem from the terminal I get the following output (plus a windows asking for permission to search for the required codec 'MPEG-4 AAC Decoder'...but it is not able to find one!):

Code:
# totem --debug --play TV-20100717-2030-1301.h264.mp4
(totem:6888): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle
(totem:6888): Totem-DEBUG: Setting initial properties
(totem:6888): Totem-DEBUG: Sending SaveYourselfDone(True) for initial SaveYourself
(totem:6888): Totem-DEBUG: Received SaveComplete message in state save-yourself-done
(totem:6888): Totem-DEBUG: totem_playlist_add_one_mrl (): TV-20100717-2030-1301.h264.mp4 (null) (null)
code....

The last Message is interesting "All missing plugins are blacklisted..." hmmm I did not blacklist any plugins...where can you see these blacklist? Is that the point, the plugin is there but blacklisted?

View 9 Replies View Related

OpenSUSE Multimedia :: Choppy Sound In Gnome - Installing Xine Backend ?

Jul 23, 2011

In Gnome and XFCE I always have a choppy music playback. The music is never played smoothly. There is always hesitations in the playback, as if the CPU is running on 100% and cannot cope with the system load.

One of the reasons for that is (in my case) Pulseaudio.

Another reason is Gstreamer. When I choose Gstreamer as backend in KDE, I get the same choppy musicplayback as in Gnome or XFCE. With Xine as backend in KDE, everything is fine. So my conclusion is: with Xine, the sound would be fine in Gnome too.

So, I wonder if it is possible to use Xine as backend in Gnome too. Does anyone have experience with running Xine in Gnome and/or XFCE? What do I need to do to set Gnome/XFCE, so that it uses Xine instead of Gstreamer?

Or is there maybe a special setting, I have to apply? In gstreamer-properties I have tried all possible settings, but this didn´t change anything to the quality of sound.

My experience is also: this choppy sound is hardware-independend. It doesn´t matter which hardware I use, the sound is choppy. It is also distro-independend. The sound is choppy in openSUSE (gnome and in KDE with applied Gstreamer backend), in Ubuntu, Xubuntu, Fedora with Gnome, Linux Mint with Gnome.

View 2 Replies View Related

OpenSUSE Multimedia :: VLC - 11.4 /w GNOME - Open Video File - Sound And Subtitles Disappear

May 7, 2011

I have problem with VLC player. The problem, from the image below, appears whenever I open video file. I click Ok, and a everything is ok, until I jump to another time sequence, when sound and subtitles disappear.

Terminal log:

View 9 Replies View Related

Fedora :: Error Of Gnome And Gvfs (bugs)?

May 17, 2011

1.crash & warning showed as soon as dekstop was prepare ( note that i had not even installed f14...i was about too but this error drive me crazy and make me confuse ? )alright i got that , here is all u need ...gnome disk utility 2.32.0-1fc14reson process/usr/libexec/gdu-notification deamon was killed by signal 6(SIGABRT)crash count :11.crash & warning showed as soon as dekstop was preparegvfs crash 1.6.4-2,fc14reason process/usr/libexec/gvfs-gdu-volume monitor was killed by signal 6(sigabrt_crash count :2so now tell wheather i should install f14 frm this cd or make another ?

View 1 Replies View Related

Ubuntu :: Future Of Gnome 2 (Bugs Exist Forever?)

Apr 12, 2011

One of the things I dislike about gnome is the fact that some bugs seem to exist forever, eloquently described here fore example: [URL]. Now, that gnome 3 is there; I am wondering: should I expect that there will much work on the 2.x side? Or will more and more bugs go "fixed with gnome3"? Is this a realistic thought?

View 9 Replies View Related

Fedora :: Lyx Bugs Or Window Manager Bugs?

Jun 30, 2011

I find that the FC 15 Xfce spin will save the user's current session except that it doesn't save what is being done with the Lyx editor. Under FC 15 Gnome 3, I found that after I added the minimize-maximize-close buttons to the top of windows, that some of the windows in Lyx (such as the one that appears for View as DVIPS) didn't respond to those buttons. (I don't remember whether Gnome 3 saved the Lyx session and I've gotten rid of Gnome 3 now.)

View 1 Replies View Related

OpenSUSE :: Suse - Can Change To The Gnome Desktop

May 10, 2011

I would like to change to the Gnome desktop is this possible and if so how?

View 5 Replies View Related

OpenSUSE Hardware :: PDA With Windows Mobile 6.0 And Suse 11.1 With Gnome?

Oct 28, 2009

I spent more than a week trying to understand how to synchronize my PDA (Windows Mobile 6.0) with Suse 11.1 and no result. So far I learned what is PalmOS and what is not (I've been trying J-pilot and Gnome Pilot) I've tried with USB-cable and Bluetooth.

What I have so far:
- SynCE (installed via YaST, with some other components)
- Blueman just in case.
Was by default in my SUSE 11.1
- Evolution
- working bluetooth (Gnome Aplet + OBEX)
- Multisync (it does see the SynCE, doesn't see the Evolution)

So how to synchronize is one case, but first of all I need to know: how connect my PDA that SUSE will see a device for synchronization? I've tried Bluetooth and I can only get a paired OBEX PDA. I can send files. that's all. I would like to ask You for help. How to do it, step by step. We can start from scratch. During debug we can use text-terminal mode. But after is finished I would like to have a GUI terminal. I can promise, that if we manage to set-it up. I can describe it as a WIKI for other. Step-by-step.

View 9 Replies View Related

OpenSUSE Install :: Gnome Menu Editing In Suse 11.2?

Dec 4, 2009

I've just installed suse 11.2 with gnome. Now I need to modify entries in the applications menu, mainly so blender starts in windowed mode. Right click on applications will let you hide an entry, not modify it. Right clicking on the suse computer menu won't even allow that. If I could find the file(s) which hold the actual data I could modify as required, but where are they?

View 3 Replies View Related

OpenSUSE Hardware :: Suse 11.2, Asus Xonar D1, No Sound?

Mar 20, 2010

I recently bought a decent sound card, the Asus xonar D1. Prior to purchase, I checked the Alsa matrix to make sure that it is supported. I couldn't get it to work after putting it in, so I did a clean install of Suse 11.2. Initially, it didn't work, but after I installed alsa-firmware, it worked. However, flash videos had no sound. I remembered something about this when I fist installed 11.2 with my older card. I looked it up and figured out that it was the PCM issue. However, when I opened kmix, there ws no PCM mixer. I even looked through the "hidden" mixers, making them all visible and maxing each out all without success.

Next, I started the "SDB:AudioTroubleshooting" process. When I got to step 2, I deleted the configurations of the xonar card configuration in Yast. I rebooted and lost all sound. I then started over with the "SDB:AudioTroubleshooting" and could not get anything, though I have not gone through updating Alsa, as I hope it is not necessary.

[Code]...

View 9 Replies View Related

OpenSUSE :: Migrate The Gnome Configuration From 32bit To 64bit SUSE?

Apr 27, 2011

My new HP625 Laptop came with SLED11 preconfigured - including such special keys as the wireless/bluetooth key etc under gnome. I need a 64bit OS and 8Gb for my applications and the HP site does not offer any explicit support for 64bit Linux. So I installed SLED64bit on separate system partition and can select now 32 or 64 bit from GRUB. There remains the problem of configuring gnome (or KDE) on the 64bit system to take advantage of the keyboard, sound, cam etc. I did find a 64bit wireless driver in the i586-Repo on the HP-site that requires the kernel from opensuse 11.3 and I got bluetooth working with gnome but just for the keyboard alone, I am stuck with finding a decent configuration under 64bit. Is it possible to migrate the system wide gnome configuration from the SLED32 bit installation (as configured by HP) to any SuSEx86_64 system?

View 9 Replies View Related

OpenSUSE Hardware :: No Sound In Suse 11.1 With Cirrus Logic CS4281

Mar 26, 2010

I am having problems getting sound to work in Suse 11.1 with a Cirrus Logic CS4281 chipset. I believe audio was working correctly in 10.2 (using KDE 3.X) but I am not 100% sure. The output from alsa-info.sh can be found at:

[URL] For a window manager, I am using the minimal x option. In general, I need sound to work without having an X server running (this is an embedded system). The motherboard is a VSBC-8 from versalogic and the manual can be found at [URL]

Here is a list of the things that I have tried:

1. Used alsamixer to set all volumes to 100
2. Used Yast to set all volumes to 100
3. Used Yast to test the sound
4. Used xmms to test playing a mp3 file
5. Used speaker-test -c2 -l5 -twav

View 5 Replies View Related

Ubuntu Multimedia :: 9.10 With GNOME And KDE And Again No Sound?

Mar 5, 2010

I have Ubuntu 9.10 with GNOME and KDE and again no sound. I simply logged in to GNOME and then to KDE.Is there any simple(!) way to fix sound problems under Ubuntu once and for all? Since more than one year I have sound issues. Tried all the solutions from the forums or wikis.This is really annoying...So, my idea is to use only one way (PulseAudio? Alsa?) to have sound, is that possible somehow?

View 3 Replies View Related

SUSE :: Improperly Shutdown Suse - Restore Gnome To Automatically Load The Default User On Start Up

Jun 30, 2010

I am new to Linux and wow, it did not take me long to run into a huge snag. I am running Suse Linux Enterprise 10 on a laptop and by some strange reason the computer froze from overheating and I was forced to shutdown improperly. Once I restarted it booted right to the command prompt when it usually instead boots to the default user. I managed to get gnome running using the "startx gnome" command. But when gnome loads, none of my normal extentions load like my wireless driver, the sound driver, etc. how to restore gnome to automatically load the default user on start up or fix any other damage I might have done? lol

View 3 Replies View Related

OpenSUSE Install :: ATI Driver Installs Have Destroyed SUSE/GNOME Graphics Setup?

May 20, 2011

Caution to all using ati graphics download repository. I have been using SUSE 11.4 after an upgrade from 11.3 through zypper for months. I added ati graphics as a update repository. Software update installed two ati files. I did not notice their names.

Upon installation my graphics was acting funny so I uninstalled the two ati-files figuring I'd be back to where I was. Now I can only get into terminal window after reboot at both runlevel 3 and 5; no graphics at all. I keep getting message re: display 'null' I wish to return to original graphics configuration prior to ati downloads which, I believed used xorg drivers.

I believe I either need to revise xorg.conf file back to original which was overwritten by ati process or reinstall xorg/X11 related files. I have an ati radeon HD 3450 agp card. 32 bit SUSE w/11.4 installed and running. Anyone have a sample xorg.conf that might work or some other ideas of how to get back to where I was.

As a related question, if I do a fresh reinstall of SUSE 11.4 using dvd can I save my /home files and any /filesystem files that my special software created in root directories.

View 9 Replies View Related

Ubuntu Multimedia :: Various Video Bugs In Lucid?

Jun 27, 2010

I did a clean install of Lucid, and almost everything video related is a little sluggish. First of all, Compiz is really slow compared to how it was in Karmic.
I don't even use window animations, just the Scale and a couple other effects, like desktop cube. Scale is really slow, and sometimes it doesn't work. I have to start compiz again to get it working. Desktop cube actually froze a couple of times half way through a rotation. Rotating the cube is much slower as well.

Also, I've been having a lot of trouble with HD video playback. It's not just the 100% CPU load that's bugging me, but every 3-4 minutes the playback skips frames, and the image becomes all glitchy.

Flash playback also uses a lot of CPU, I can't even watch ..... videos in fullscreen most of the time. And I'm always opting for the lowest quality possible btw.

I have a dual core AMD CPU and 8600GT nvidia graphics card, so it's not a hardware issue.

View 5 Replies View Related

OpenSUSE Multimedia :: Replace The On-board Sound Chip With An Add-on Sound Card?

Jun 14, 2011

I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.

Anyone know which of these cards will work on Suse 11.4?

Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS

View 9 Replies View Related

OpenSUSE Multimedia :: When Boot Up, (runlevel 3), Sound Is There Via The Mic/line-in Jack, But As Soon As KDE Starts, The Sound Cuts?

Jun 24, 2011

I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:

View 9 Replies View Related

Debian Multimedia :: Sound Schemes For GNOME / MATE?

Jul 26, 2015

Are there any sound schemes for GNOME and MATE? Like different system sounds and a logon-logoff sound and a system sound for when I empty the trash bin? Like the way Ubuntu does, just with different sounds. I'm not that crazy about Ubuntu's system sounds.

I know I don't need it, I think it would just make a nice addition to my laptop and later my desktop.

View 5 Replies View Related

Ubuntu Multimedia :: No Sound In Gnome-subtitles With Mkv Files?

May 9, 2010

I got a problem with gnome-subtitles when I try to sync an srt file with an mkv file: no sound available, whereas in the case of an avi file no problem of course. Did you experiment the same problem and find a workaround?

View 1 Replies View Related

Ubuntu Multimedia :: Alternative To Gnome-sound-recorder (2.28.1)?

Jan 29, 2011

I am looking for an alternative to gnome-sound-recorder (2.28.1).

I need the option of pausing the recording, and then continue into the same file (appending), so that I can take notes as required

View 2 Replies View Related

OpenSUSE Multimedia :: Amarok2 Sound Lost When Other Sound Plays

Dec 29, 2009

openSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)

Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.

Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).

alsa-info here - [URL]

Also I am totally confused by the mixer, it has so many knobs that I am totally lost!

here's a lovely pic - [URL]

View 4 Replies View Related

OpenSUSE Multimedia :: Snd_sbawe ISA Sound Card Not Giving Sound

Feb 9, 2010

I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.

The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.

View 1 Replies View Related

OpenSUSE Multimedia :: No Sound In Firefox With Open Sound System?

Jun 24, 2010

I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.

System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)

View 3 Replies View Related

OpenSUSE Multimedia :: Only Able To Listen Sound After Configure The Sound Driver

Oct 17, 2010

I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved